Reconfiguring a kubeadm cluster
kubeadm does not support automated ways of reconfiguring components that were deployed on managed nodes. One way of automating this would be by using a custom operator.
To modify the components configuration you must manually edit associated cluster objects and files on disk.
This guide shows the correct sequence of steps that need to be performed to achieve kubeadm cluster reconfiguration.
Before you begin
- You need a cluster that was deployed using kubeadm
- Have administrator credentials (
/etc/kubernetes/admin.conf) and network connectivity to a running kube-apiserver in the cluster from a host that has kubectl installed - Have a text editor installed on all hosts
Reconfiguring the cluster
kubeadm writes a set of cluster wide component configuration options in
ConfigMaps and other objects. These objects must be manually edited. The command kubectl edit
can be used for that.
The kubectl edit command will open a text editor where you can edit and save the object directly.
You can use the environment variables KUBECONFIG and KUBE_EDITOR to specify the location of
the kubectl consumed kubeconfig file and preferred text editor.
For example:
KUBECONFIG=/etc/kubernetes/admin.conf KUBE_EDITOR=nano kubectl edit <parameters>
Applying cluster configuration changes
Updating the ClusterConfiguration
During cluster creation and upgrade, kubeadm writes its
ClusterConfiguration
in a ConfigMap called kubeadm-config in the kube-system namespace.
To change a particular option in the ClusterConfiguration you can edit the ConfigMap with this command:
kubectl edit cm -n kube-system kubeadm-config
The configuration is located under the data.ClusterConfiguration key.
ClusterConfiguration includes a variety of options that affect the configuration of individual
components such as kube-apiserver, kube-scheduler, kube-controller-manager, CoreDNS, etcd and kube-proxy.
Changes to the configuration must be reflected on node components manually.
Reflecting ClusterConfiguration changes on control plane nodes
kubeadm manages the control plane components as static Pod manifests located in
the directory /etc/kubernetes/manifests.
Any changes to the ClusterConfiguration under the apiServer, controllerManager, scheduler or etcd
keys must be reflected in the associated files in the manifests directory on a control plane node.
Such changes may include:
extraArgs- requires updating the list of flags passed to a component containerextraMounts- requires updated the volume mounts for a component container*SANs- requires writing new certificates with updated Subject Alternative Names.
Before proceeding with these changes, make sure you have backed up the directory /etc/kubernetes/.
To write new certificates you can use:
kubeadm init phase certs <component-name> --config <config-file>
To write new manifest files in /etc/kubernetes/manifests you can use:
kubeadm init phase control-plane <component-name> --config <config-file>
The <config-file> contents must match the updated ClusterConfiguration.
The <component-name> value must be the name of the component.
/etc/kubernetes/manifests will tell the kubelet to restart the static Pod for the corresponding component.
Try doing these changes one node at a time to leave the cluster without downtime.
Applying kubelet configuration changes
Updating the KubeletConfiguration
During cluster creation and upgrade, kubeadm writes its
KubeletConfiguration
in a ConfigMap called kubelet-config in the kube-system namespace.
You can edit the ConfigMap with this command:
kubectl edit cm -n kube-system kubelet-config
The configuration is located under the data.kubelet key.
Reflecting the kubelet changes
To reflect the change on kubeadm nodes you must do the following:
- Log in to a kubeadm node
- Run
kubeadm upgrade node phase kubelet-configto download the latestkubelet-configConfigMap contents into the local file/var/lib/kubelet/config.yaml - Edit the file
/var/lib/kubelet/kubeadm-flags.envto apply additional configuration with flags - Restart the kubelet service with
systemctl restart kubelet
kubeadm upgrade, kubeadm downloads the KubeletConfiguration from the
kubelet-config ConfigMap and overwrite the contents of /var/lib/kubelet/config.yaml.
This means that node local configuration must be applied either by flags in
/var/lib/kubelet/kubeadm-flags.env or by manually updating the contents of
/var/lib/kubelet/config.yaml after kubeadm upgrade, and then restarting the kubelet.
Applying kube-proxy configuration changes
Updating the KubeProxyConfiguration
During cluster creation and upgrade, kubeadm writes its
KubeProxyConfiguration
in a ConfigMap in the kube-system namespace called kube-proxy.
This ConfigMap is used by the kube-proxy DaemonSet in the kube-system namespace.
To change a particular option in the KubeProxyConfiguration, you can edit the ConfigMap with this command:
kubectl edit cm -n kube-system kube-proxy
The configuration is located under the data.config.conf key.
Reflecting the kube-proxy changes
Once the kube-proxy ConfigMap is updated, you can restart all kube-proxy Pods:
Obtain the Pod names:
kubectl get po -n kube-system | grep kube-proxy
Delete a Pod with:
kubectl delete po -n kube-system <pod-name>
New Pods that use the updated ConfigMap will be created.
Applying CoreDNS configuration changes
Updating the CoreDNS Deployment and Service
kubeadm deploys CoreDNS as a Deployment called coredns and with a Service kube-dns,
both in the kube-system namespace.
To update any of the CoreDNS settings, you can edit the Deployment and Service objects:
kubectl edit deployment -n kube-system coredns
kubectl edit service -n kube-system kube-dns
Reflecting the CoreDNS changes
Once the CoreDNS changes are applied you can delete the CoreDNS Pods:
Obtain the Pod names:
kubectl get po -n kube-system | grep coredns
Delete a Pod with:
kubectl delete po -n kube-system <pod-name>
New Pods with the updated CoreDNS configuration will be created.
kubeadm upgrade apply, your changes to the CoreDNS
objects will be lost and must be reapplied.
Persisting the reconfiguration
During the execution of kubeadm upgrade on a managed node, kubeadm might overwrite configuration
that was applied after the cluster was created (reconfiguration).
Persisting Node object reconfiguration
kubeadm writes Labels, Taints, CRI socket and other information on the Node object for a particular Kubernetes node. To change any of the contents of this Node object you can use:
kubectl edit no <node-name>
During kubeadm upgrade the contents of such a Node might get overwritten.
If you would like to persist your modifications to the Node object after upgrade,
you can prepare a kubectl patch
and apply it to the Node object:
kubectl patch no <node-name> --patch-file <patch-file>
Persisting control plane component reconfiguration
The main source of control plane configuration is the ClusterConfiguration
object stored in the cluster. To extend the static Pod manifests configuration,
patches can be used.
These patch files must remain as files on the control plane nodes to ensure that
they can be used by the kubeadm upgrade ... --patches <directory>.
If reconfiguration is done to the ClusterConfiguration and static Pod manifests on disk,
the set of node specific patches must be updated accordingly.
Persisting kubelet reconfiguration
Any changes to the KubeletConfiguration stored in /var/lib/kubelet/config.yaml will be overwritten on
kubeadm upgrade by downloading the contents of the cluster wide kubelet-config ConfigMap.
To persist kubelet node specific configuration either the file /var/lib/kubelet/config.yaml
has to be updated manually post-upgrade or the file /var/lib/kubelet/kubeadm-flags.env can include flags.
The kubelet flags override the associated KubeletConfiguration options, but note that
some of the flags are deprecated.
A kubelet restart will be required after changing /var/lib/kubelet/config.yaml or
/var/lib/kubelet/kubeadm-flags.env.