This is the multi-page printable view of this section. Click here to print.

Return to the regular view of this page.

Configure Pods and Containers

Perform common configuration tasks for Pods and containers.

1: Assign Memory Resources to Containers and Pods
2: Assign CPU Resources to Containers and Pods
3: Configure GMSA for Windows Pods and containers
4: Resize CPU and Memory Resources assigned to Containers
5: Configure RunAsUserName for Windows pods and containers
6: Create a Windows HostProcess Pod
7: Configure Quality of Service for Pods
8: Assign Extended Resources to a Container
9: Configure a Pod to Use a Volume for Storage
10: Configure a Pod to Use a PersistentVolume for Storage
11: Configure a Pod to Use a Projected Volume for Storage
12: Configure a Security Context for a Pod or Container
13: Configure Service Accounts for Pods
14: Pull an Image from a Private Registry
15: Configure Liveness, Readiness and Startup Probes
16: Assign Pods to Nodes
17: Assign Pods to Nodes using Node Affinity
18: Configure Pod Initialization
19: Attach Handlers to Container Lifecycle Events
20: Configure a Pod to Use a ConfigMap
21: Share Process Namespace between Containers in a Pod
22: Use a User Namespace With a Pod
23: Create static Pods
24: Translate a Docker Compose File to Kubernetes Resources
25: Enforce Pod Security Standards by Configuring the Built-in Admission Controller
26: Enforce Pod Security Standards with Namespace Labels
27: Migrate from PodSecurityPolicy to the Built-In PodSecurity Admission Controller

1 - Assign Memory Resources to Containers and Pods

This page shows how to assign a memory request and a memory limit to a Container. A Container is guaranteed to have as much memory as it requests, but is not allowed to use more memory than its limit.

Before you begin

You need to have a Kubernetes cluster, and the kubectl command-line tool must be configured to communicate with your cluster. It is recommended to run this tutorial on a cluster with at least two nodes that are not acting as control plane hosts. If you do not already have a cluster, you can create one by using minikube or you can use one of these Kubernetes playgrounds:

To check the version, enter kubectl version.

Each node in your cluster must have at least 300 MiB of memory.

A few of the steps on this page require you to run the metrics-server service in your cluster. If you have the metrics-server running, you can skip those steps.

If you are running Minikube, run the following command to enable the metrics-server:

minikube addons enable metrics-server

To see whether the metrics-server is running, or another provider of the resource metrics API (metrics.k8s.io), run the following command:

kubectl get apiservices

If the resource metrics API is available, the output includes a reference to metrics.k8s.io.

NAME
v1beta1.metrics.k8s.io

Create a namespace

Create a namespace so that the resources you create in this exercise are isolated from the rest of your cluster.

kubectl create namespace mem-example

Specify a memory request and a memory limit

To specify a memory request for a Container, include the resources:requests field in the Container's resource manifest. To specify a memory limit, include resources:limits.

In this exercise, you create a Pod that has one Container. The Container has a memory request of 100 MiB and a memory limit of 200 MiB. Here's the configuration file for the Pod:

pods/resource/memory-request-limit.yaml

apiVersion: v1
kind: Pod
metadata:
  name: memory-demo
  namespace: mem-example
spec:
  containers:
  - name: memory-demo-ctr
    image: polinux/stress
    resources:
      requests:
        memory: "100Mi"
      limits:
        memory: "200Mi"
    command: ["stress"]
    args: ["--vm", "1", "--vm-bytes", "150M", "--vm-hang", "1"]

The args section in the configuration file provides arguments for the Container when it starts. The "--vm-bytes", "150M" arguments tell the Container to attempt to allocate 150 MiB of memory.

Create the Pod:

kubectl apply -f https://k8s.io/examples/pods/resource/memory-request-limit.yaml --namespace=mem-example

Verify that the Pod Container is running:

kubectl get pod memory-demo --namespace=mem-example

View detailed information about the Pod:

kubectl get pod memory-demo --output=yaml --namespace=mem-example

The output shows that the one Container in the Pod has a memory request of 100 MiB and a memory limit of 200 MiB.

...
resources:
  requests:
    memory: 100Mi
  limits:
    memory: 200Mi
...

Run kubectl top to fetch the metrics for the pod:

kubectl top pod memory-demo --namespace=mem-example

The output shows that the Pod is using about 162,900,000 bytes of memory, which is about 150 MiB. This is greater than the Pod's 100 MiB request, but within the Pod's 200 MiB limit.

NAME                        CPU(cores)   MEMORY(bytes)
memory-demo                 <something>  162856960

Delete your Pod:

kubectl delete pod memory-demo --namespace=mem-example

Exceed a Container's memory limit

A Container can exceed its memory request if the Node has memory available. But a Container is not allowed to use more than its memory limit. If a Container allocates more memory than its limit, the Container becomes a candidate for termination. If the Container continues to consume memory beyond its limit, the Container is terminated. If a terminated Container can be restarted, the kubelet restarts it, as with any other type of runtime failure.

In this exercise, you create a Pod that attempts to allocate more memory than its limit. Here is the configuration file for a Pod that has one Container with a memory request of 50 MiB and a memory limit of 100 MiB:

pods/resource/memory-request-limit-2.yaml

apiVersion: v1
kind: Pod
metadata:
  name: memory-demo-2
  namespace: mem-example
spec:
  containers:
  - name: memory-demo-2-ctr
    image: polinux/stress
    resources:
      requests:
        memory: "50Mi"
      limits:
        memory: "100Mi"
    command: ["stress"]
    args: ["--vm", "1", "--vm-bytes", "250M", "--vm-hang", "1"]

In the args section of the configuration file, you can see that the Container will attempt to allocate 250 MiB of memory, which is well above the 100 MiB limit.

Create the Pod:

kubectl apply -f https://k8s.io/examples/pods/resource/memory-request-limit-2.yaml --namespace=mem-example

View detailed information about the Pod:

kubectl get pod memory-demo-2 --namespace=mem-example

At this point, the Container might be running or killed. Repeat the preceding command until the Container is killed:

NAME            READY     STATUS      RESTARTS   AGE
memory-demo-2   0/1       OOMKilled   1          24s

Get a more detailed view of the Container status:

kubectl get pod memory-demo-2 --output=yaml --namespace=mem-example

The output shows that the Container was killed because it is out of memory (OOM):

lastState:
   terminated:
     containerID: 65183c1877aaec2e8427bc95609cc52677a454b56fcb24340dbd22917c23b10f
     exitCode: 137
     finishedAt: 2017-06-20T20:52:19Z
     reason: OOMKilled
     startedAt: null

The Container in this exercise can be restarted, so the kubelet restarts it. Repeat this command several times to see that the Container is repeatedly killed and restarted:

kubectl get pod memory-demo-2 --namespace=mem-example

The output shows that the Container is killed, restarted, killed again, restarted again, and so on:

kubectl get pod memory-demo-2 --namespace=mem-example
NAME            READY     STATUS      RESTARTS   AGE
memory-demo-2   0/1       OOMKilled   1          37s


kubectl get pod memory-demo-2 --namespace=mem-example
NAME            READY     STATUS    RESTARTS   AGE
memory-demo-2   1/1       Running   2          40s

View detailed information about the Pod history:

kubectl describe pod memory-demo-2 --namespace=mem-example

The output shows that the Container starts and fails repeatedly:

... Normal  Created   Created container with id 66a3a20aa7980e61be4922780bf9d24d1a1d8b7395c09861225b0eba1b1f8511
... Warning BackOff   Back-off restarting failed container

View detailed information about your cluster's Nodes:

kubectl describe nodes

The output includes a record of the Container being killed because of an out-of-memory condition:

Warning OOMKilling Memory cgroup out of memory: Kill process 4481 (stress) score 1994 or sacrifice child

Delete your Pod:

kubectl delete pod memory-demo-2 --namespace=mem-example

Specify a memory request that is too big for your Nodes

Memory requests and limits are associated with Containers, but it is useful to think of a Pod as having a memory request and limit. The memory request for the Pod is the sum of the memory requests for all the Containers in the Pod. Likewise, the memory limit for the Pod is the sum of the limits of all the Containers in the Pod.

Pod scheduling is based on requests. A Pod is scheduled to run on a Node only if the Node has enough available memory to satisfy the Pod's memory request.

In this exercise, you create a Pod that has a memory request so big that it exceeds the capacity of any Node in your cluster. Here is the configuration file for a Pod that has one Container with a request for 1000 GiB of memory, which likely exceeds the capacity of any Node in your cluster.

pods/resource/memory-request-limit-3.yaml

apiVersion: v1
kind: Pod
metadata:
  name: memory-demo-3
  namespace: mem-example
spec:
  containers:
  - name: memory-demo-3-ctr
    image: polinux/stress
    resources:
      requests:
        memory: "1000Gi"
      limits:
        memory: "1000Gi"
    command: ["stress"]
    args: ["--vm", "1", "--vm-bytes", "150M", "--vm-hang", "1"]

Create the Pod:

kubectl apply -f https://k8s.io/examples/pods/resource/memory-request-limit-3.yaml --namespace=mem-example

View the Pod status:

kubectl get pod memory-demo-3 --namespace=mem-example

The output shows that the Pod status is PENDING. That is, the Pod is not scheduled to run on any Node, and it will remain in the PENDING state indefinitely:

kubectl get pod memory-demo-3 --namespace=mem-example
NAME            READY     STATUS    RESTARTS   AGE
memory-demo-3   0/1       Pending   0          25s

View detailed information about the Pod, including events:

kubectl describe pod memory-demo-3 --namespace=mem-example

The output shows that the Container cannot be scheduled because of insufficient memory on the Nodes:

Events:
  ...  Reason            Message
       ------            -------
  ...  FailedScheduling  No nodes are available that match all of the following predicates:: Insufficient memory (3).

Memory units

The memory resource is measured in bytes. You can express memory as a plain integer or a fixed-point integer with one of these suffixes: E, P, T, G, M, K, Ei, Pi, Ti, Gi, Mi, Ki. For example, the following represent approximately the same value:

128974848, 129e6, 129M, 123Mi

Delete your Pod:

kubectl delete pod memory-demo-3 --namespace=mem-example

If you do not specify a memory limit

If you do not specify a memory limit for a Container, one of the following situations applies:

The Container has no upper bound on the amount of memory it uses. The Container could use all of the memory available on the Node where it is running which in turn could invoke the OOM Killer. Further, in case of an OOM Kill, a container with no resource limits will have a greater chance of being killed.
The Container is running in a namespace that has a default memory limit, and the Container is automatically assigned the default limit. Cluster administrators can use a LimitRange to specify a default value for the memory limit.

Motivation for memory requests and limits

By configuring memory requests and limits for the Containers that run in your cluster, you can make efficient use of the memory resources available on your cluster's Nodes. By keeping a Pod's memory request low, you give the Pod a good chance of being scheduled. By having a memory limit that is greater than the memory request, you accomplish two things:

The Pod can have bursts of activity where it makes use of memory that happens to be available.
The amount of memory a Pod can use during a burst is limited to some reasonable amount.

Clean up

Delete your namespace. This deletes all the Pods that you created for this task:

kubectl delete namespace mem-example

What's next

For app developers

For cluster administrators

2 - Assign CPU Resources to Containers and Pods

This page shows how to assign a CPU request and a CPU limit to a container. Containers cannot use more CPU than the configured limit. Provided the system has CPU time free, a container is guaranteed to be allocated as much CPU as it requests.

Before you begin

To check the version, enter kubectl version.

Your cluster must have at least 1 CPU available for use to run the task examples.

A few of the steps on this page require you to run the metrics-server service in your cluster. If you have the metrics-server running, you can skip those steps.

If you are running Minikube, run the following command to enable metrics-server:

minikube addons enable metrics-server

To see whether metrics-server (or another provider of the resource metrics API, metrics.k8s.io) is running, type the following command:

kubectl get apiservices

If the resource metrics API is available, the output will include a reference to metrics.k8s.io.

NAME
v1beta1.metrics.k8s.io

Create a namespace

Create a Namespace so that the resources you create in this exercise are isolated from the rest of your cluster.

kubectl create namespace cpu-example

Specify a CPU request and a CPU limit

To specify a CPU request for a container, include the resources:requests field in the Container resource manifest. To specify a CPU limit, include resources:limits.

In this exercise, you create a Pod that has one container. The container has a request of 0.5 CPU and a limit of 1 CPU. Here is the configuration file for the Pod:

pods/resource/cpu-request-limit.yaml

apiVersion: v1
kind: Pod
metadata:
  name: cpu-demo
  namespace: cpu-example
spec:
  containers:
  - name: cpu-demo-ctr
    image: vish/stress
    resources:
      limits:
        cpu: "1"
      requests:
        cpu: "0.5"
    args:
    - -cpus
    - "2"

The args section of the configuration file provides arguments for the container when it starts. The -cpus "2" argument tells the Container to attempt to use 2 CPUs.

Create the Pod:

kubectl apply -f https://k8s.io/examples/pods/resource/cpu-request-limit.yaml --namespace=cpu-example

Verify that the Pod is running:

kubectl get pod cpu-demo --namespace=cpu-example

View detailed information about the Pod:

kubectl get pod cpu-demo --output=yaml --namespace=cpu-example

The output shows that the one container in the Pod has a CPU request of 500 milliCPU and a CPU limit of 1 CPU.

resources:
  limits:
    cpu: "1"
  requests:
    cpu: 500m

Use kubectl top to fetch the metrics for the Pod:

kubectl top pod cpu-demo --namespace=cpu-example

This example output shows that the Pod is using 974 milliCPU, which is slightly less than the limit of 1 CPU specified in the Pod configuration.

NAME                        CPU(cores)   MEMORY(bytes)
cpu-demo                    974m         <something>

Recall that by setting -cpu "2", you configured the Container to attempt to use 2 CPUs, but the Container is only being allowed to use about 1 CPU. The container's CPU use is being throttled, because the container is attempting to use more CPU resources than its limit.

Note: Another possible explanation for the CPU use being below 1.0 is that the Node might not have enough CPU resources available. Recall that the prerequisites for this exercise require your cluster to have at least 1 CPU available for use. If your Container runs on a Node that has only 1 CPU, the Container cannot use more than 1 CPU regardless of the CPU limit specified for the Container.

CPU units

The CPU resource is measured in CPU units. One CPU, in Kubernetes, is equivalent to:

1 AWS vCPU
1 GCP Core
1 Azure vCore
1 Hyperthread on a bare-metal Intel processor with Hyperthreading

Fractional values are allowed. A Container that requests 0.5 CPU is guaranteed half as much CPU as a Container that requests 1 CPU. You can use the suffix m to mean milli. For example 100m CPU, 100 milliCPU, and 0.1 CPU are all the same. Precision finer than 1m is not allowed.

CPU is always requested as an absolute quantity, never as a relative quantity; 0.1 is the same amount of CPU on a single-core, dual-core, or 48-core machine.

Delete your Pod:

kubectl delete pod cpu-demo --namespace=cpu-example

Specify a CPU request that is too big for your Nodes

CPU requests and limits are associated with Containers, but it is useful to think of a Pod as having a CPU request and limit. The CPU request for a Pod is the sum of the CPU requests for all the Containers in the Pod. Likewise, the CPU limit for a Pod is the sum of the CPU limits for all the Containers in the Pod.

Pod scheduling is based on requests. A Pod is scheduled to run on a Node only if the Node has enough CPU resources available to satisfy the Pod CPU request.

In this exercise, you create a Pod that has a CPU request so big that it exceeds the capacity of any Node in your cluster. Here is the configuration file for a Pod that has one Container. The Container requests 100 CPU, which is likely to exceed the capacity of any Node in your cluster.

pods/resource/cpu-request-limit-2.yaml

apiVersion: v1
kind: Pod
metadata:
  name: cpu-demo-2
  namespace: cpu-example
spec:
  containers:
  - name: cpu-demo-ctr-2
    image: vish/stress
    resources:
      limits:
        cpu: "100"
      requests:
        cpu: "100"
    args:
    - -cpus
    - "2"

Create the Pod:

kubectl apply -f https://k8s.io/examples/pods/resource/cpu-request-limit-2.yaml --namespace=cpu-example

View the Pod status:

kubectl get pod cpu-demo-2 --namespace=cpu-example

The output shows that the Pod status is Pending. That is, the Pod has not been scheduled to run on any Node, and it will remain in the Pending state indefinitely:

NAME         READY     STATUS    RESTARTS   AGE
cpu-demo-2   0/1       Pending   0          7m

View detailed information about the Pod, including events:

kubectl describe pod cpu-demo-2 --namespace=cpu-example

The output shows that the Container cannot be scheduled because of insufficient CPU resources on the Nodes:

Events:
  Reason                        Message
  ------                        -------
  FailedScheduling      No nodes are available that match all of the following predicates:: Insufficient cpu (3).

Delete your Pod:

kubectl delete pod cpu-demo-2 --namespace=cpu-example

If you do not specify a CPU limit

If you do not specify a CPU limit for a Container, then one of these situations applies:

The Container has no upper bound on the CPU resources it can use. The Container could use all of the CPU resources available on the Node where it is running.
The Container is running in a namespace that has a default CPU limit, and the Container is automatically assigned the default limit. Cluster administrators can use a LimitRange to specify a default value for the CPU limit.

If you specify a CPU limit but do not specify a CPU request

If you specify a CPU limit for a Container but do not specify a CPU request, Kubernetes automatically assigns a CPU request that matches the limit. Similarly, if a Container specifies its own memory limit, but does not specify a memory request, Kubernetes automatically assigns a memory request that matches the limit.

Motivation for CPU requests and limits

By configuring the CPU requests and limits of the Containers that run in your cluster, you can make efficient use of the CPU resources available on your cluster Nodes. By keeping a Pod CPU request low, you give the Pod a good chance of being scheduled. By having a CPU limit that is greater than the CPU request, you accomplish two things:

The Pod can have bursts of activity where it makes use of CPU resources that happen to be available.
The amount of CPU resources a Pod can use during a burst is limited to some reasonable amount.

Clean up

Delete your namespace:

kubectl delete namespace cpu-example

What's next

For app developers

For cluster administrators

3 - Configure GMSA for Windows Pods and containers

FEATURE STATE: Kubernetes v1.18 [stable]

This page shows how to configure Group Managed Service Accounts (GMSA) for Pods and containers that will run on Windows nodes. Group Managed Service Accounts are a specific type of Active Directory account that provides automatic password management, simplified service principal name (SPN) management, and the ability to delegate the management to other administrators across multiple servers.

In Kubernetes, GMSA credential specs are configured at a Kubernetes cluster-wide scope as Custom Resources. Windows Pods, as well as individual containers within a Pod, can be configured to use a GMSA for domain based functions (e.g. Kerberos authentication) when interacting with other Windows services.

Before you begin

You need to have a Kubernetes cluster and the kubectl command-line tool must be configured to communicate with your cluster. The cluster is expected to have Windows worker nodes. This section covers a set of initial steps required once for each cluster:

Install the GMSACredentialSpec CRD

A CustomResourceDefinition(CRD) for GMSA credential spec resources needs to be configured on the cluster to define the custom resource type GMSACredentialSpec. Download the GMSA CRD YAML and save it as gmsa-crd.yaml. Next, install the CRD with kubectl apply -f gmsa-crd.yaml

Install webhooks to validate GMSA users

Two webhooks need to be configured on the Kubernetes cluster to populate and validate GMSA credential spec references at the Pod or container level:

A mutating webhook that expands references to GMSAs (by name from a Pod specification) into the full credential spec in JSON form within the Pod spec.
A validating webhook ensures all references to GMSAs are authorized to be used by the Pod service account.

Installing the above webhooks and associated objects require the steps below:

Create a certificate key pair (that will be used to allow the webhook container to communicate to the cluster)
Install a secret with the certificate from above.
Create a deployment for the core webhook logic.
Create the validating and mutating webhook configurations referring to the deployment.

A script can be used to deploy and configure the GMSA webhooks and associated objects mentioned above. The script can be run with a --dry-run=server option to allow you to review the changes that would be made to your cluster.

The YAML template used by the script may also be used to deploy the webhooks and associated objects manually (with appropriate substitutions for the parameters)

Configure GMSAs and Windows nodes in Active Directory

Before Pods in Kubernetes can be configured to use GMSAs, the desired GMSAs need to be provisioned in Active Directory as described in the Windows GMSA documentation. Windows worker nodes (that are part of the Kubernetes cluster) need to be configured in Active Directory to access the secret credentials associated with the desired GMSA as described in the Windows GMSA documentation.

Create GMSA credential spec resources

With the GMSACredentialSpec CRD installed (as described earlier), custom resources containing GMSA credential specs can be configured. The GMSA credential spec does not contain secret or sensitive data. It is information that a container runtime can use to describe the desired GMSA of a container to Windows. GMSA credential specs can be generated in YAML format with a utility PowerShell script.

Following are the steps for generating a GMSA credential spec YAML manually in JSON format and then converting it:

Import the CredentialSpec module: ipmo CredentialSpec.psm1
Create a credential spec in JSON format using New-CredentialSpec. To create a GMSA credential spec named WebApp1, invoke New-CredentialSpec -Name WebApp1 -AccountName WebApp1 -Domain $(Get-ADDomain -Current LocalComputer)
Use Get-CredentialSpec to show the path of the JSON file.
Convert the credspec file from JSON to YAML format and apply the necessary header fields apiVersion, kind, metadata and credspec to make it a GMSACredentialSpec custom resource that can be configured in Kubernetes.

The following YAML configuration describes a GMSA credential spec named gmsa-WebApp1:

apiVersion: windows.k8s.io/v1
kind: GMSACredentialSpec
metadata:
  name: gmsa-WebApp1  # This is an arbitrary name but it will be used as a reference
credspec:
  ActiveDirectoryConfig:
    GroupManagedServiceAccounts:
    - Name: WebApp1   # Username of the GMSA account
      Scope: CONTOSO  # NETBIOS Domain Name
    - Name: WebApp1   # Username of the GMSA account
      Scope: contoso.com # DNS Domain Name
  CmsPlugins:
  - ActiveDirectory
  DomainJoinConfig:
    DnsName: contoso.com  # DNS Domain Name
    DnsTreeName: contoso.com # DNS Domain Name Root
    Guid: 244818ae-87ac-4fcd-92ec-e79e5252348a  # GUID
    MachineAccountName: WebApp1 # Username of the GMSA account
    NetBiosName: CONTOSO  # NETBIOS Domain Name
    Sid: S-1-5-21-2126449477-2524075714-3094792973 # SID of GMSA

The above credential spec resource may be saved as gmsa-Webapp1-credspec.yaml and applied to the cluster using: kubectl apply -f gmsa-Webapp1-credspec.yml

Configure cluster role to enable RBAC on specific GMSA credential specs

A cluster role needs to be defined for each GMSA credential spec resource. This authorizes the use verb on a specific GMSA resource by a subject which is typically a service account. The following example shows a cluster role that authorizes usage of the gmsa-WebApp1 credential spec from above. Save the file as gmsa-webapp1-role.yaml and apply using kubectl apply -f gmsa-webapp1-role.yaml

# Create the Role to read the credspec
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
  name: webapp1-role
rules:
- apiGroups: ["windows.k8s.io"]
  resources: ["gmsacredentialspecs"]
  verbs: ["use"]
  resourceNames: ["gmsa-WebApp1"]

Assign role to service accounts to use specific GMSA credspecs

A service account (that Pods will be configured with) needs to be bound to the cluster role create above. This authorizes the service account to use the desired GMSA credential spec resource. The following shows the default service account being bound to a cluster role webapp1-role to use gmsa-WebApp1 credential spec resource created above.

apiVersion: rbac.authorization.k8s.io/v1
kind: RoleBinding
metadata:
  name: allow-default-svc-account-read-on-gmsa-WebApp1
  namespace: default
subjects:
- kind: ServiceAccount
  name: default
  namespace: default
roleRef:
  kind: ClusterRole
  name: webapp1-role
  apiGroup: rbac.authorization.k8s.io

Configure GMSA credential spec reference in Pod spec

The Pod spec field securityContext.windowsOptions.gmsaCredentialSpecName is used to specify references to desired GMSA credential spec custom resources in Pod specs. This configures all containers in the Pod spec to use the specified GMSA. A sample Pod spec with the annotation populated to refer to gmsa-WebApp1:

apiVersion: apps/v1
kind: Deployment
metadata:
  labels:
    run: with-creds
  name: with-creds
  namespace: default
spec:
  replicas: 1
  selector:
    matchLabels:
      run: with-creds
  template:
    metadata:
      labels:
        run: with-creds
    spec:
      securityContext:
        windowsOptions:
          gmsaCredentialSpecName: gmsa-webapp1
      containers:
      - image: mcr.microsoft.com/windows/servercore/iis:windowsservercore-ltsc2019
        imagePullPolicy: Always
        name: iis
      nodeSelector:
        kubernetes.io/os: windows

Individual containers in a Pod spec can also specify the desired GMSA credspec using a per-container securityContext.windowsOptions.gmsaCredentialSpecName field. For example:

apiVersion: apps/v1
kind: Deployment
metadata:
  labels:
    run: with-creds
  name: with-creds
  namespace: default
spec:
  replicas: 1
  selector:
    matchLabels:
      run: with-creds
  template:
    metadata:
      labels:
        run: with-creds
    spec:
      containers:
      - image: mcr.microsoft.com/windows/servercore/iis:windowsservercore-ltsc2019
        imagePullPolicy: Always
        name: iis
        securityContext:
          windowsOptions:
            gmsaCredentialSpecName: gmsa-Webapp1
      nodeSelector:
        kubernetes.io/os: windows

As Pod specs with GMSA fields populated (as described above) are applied in a cluster, the following sequence of events take place:

The mutating webhook resolves and expands all references to GMSA credential spec resources to the contents of the GMSA credential spec.
The validating webhook ensures the service account associated with the Pod is authorized for the use verb on the specified GMSA credential spec.
The container runtime configures each Windows container with the specified GMSA credential spec so that the container can assume the identity of the GMSA in Active Directory and access services in the domain using that identity.

Authenticating to network shares using hostname or FQDN

If you are experiencing issues connecting to SMB shares from Pods using hostname or FQDN, but are able to access the shares via their IPv4 address then make sure the following registry key is set on the Windows nodes.

reg add "HKLM\SYSTEM\CurrentControlSet\Services\hns\State" /v EnableCompartmentNamespace /t REG_DWORD /d 1

Running Pods will then need to be recreated to pick up the behavior changes. More information on how this registry key is used can be found here

Troubleshooting

If you are having difficulties getting GMSA to work in your environment, there are a few troubleshooting steps you can take.

First, make sure the credspec has been passed to the Pod. To do this you will need to exec into one of your Pods and check the output of the nltest.exe /parentdomain command.

In the example below the Pod did not get the credspec correctly:

kubectl exec -it iis-auth-7776966999-n5nzr powershell.exe

nltest.exe /parentdomain results in the following error:

Getting parent domain failed: Status = 1722 0x6ba RPC_S_SERVER_UNAVAILABLE

If your Pod did get the credspec correctly, then next check communication with the domain. First, from inside of your Pod, quickly do an nslookup to find the root of your domain.

This will tell us 3 things:

The Pod can reach the DC
The DC can reach the Pod
DNS is working correctly.

If the DNS and communication test passes, next you will need to check if the Pod has established secure channel communication with the domain. To do this, again, exec into your Pod and run the nltest.exe /query command.

nltest.exe /query

Results in the following output:

I_NetLogonControl failed: Status = 1722 0x6ba RPC_S_SERVER_UNAVAILABLE

This tells us that for some reason, the Pod was unable to logon to the domain using the account specified in the credspec. You can try to repair the secure channel by running the following:

nltest /sc_reset:domain.example

If the command is successful you will see and output similar to this:

Flags: 30 HAS_IP  HAS_TIMESERV
Trusted DC Name \\dc10.domain.example
Trusted DC Connection Status Status = 0 0x0 NERR_Success
The command completed successfully

If the above corrects the error, you can automate the step by adding the following lifecycle hook to your Pod spec. If it did not correct the error, you will need to examine your credspec again and confirm that it is correct and complete.

        image: registry.domain.example/iis-auth:1809v1
        lifecycle:
          postStart:
            exec:
              command: ["powershell.exe","-command","do { Restart-Service -Name netlogon } while ( $($Result = (nltest.exe /query); if ($Result -like '*0x0 NERR_Success*') {return $true} else {return $false}) -eq $false)"]
        imagePullPolicy: IfNotPresent

If you add the lifecycle section show above to your Pod spec, the Pod will execute the commands listed to restart the netlogon service until the nltest.exe /query command exits without error.

4 - Resize CPU and Memory Resources assigned to Containers

FEATURE STATE: Kubernetes v1.27 [alpha]

This page assumes that you are familiar with Quality of Service for Kubernetes Pods.

This page shows how to resize CPU and memory resources assigned to containers of a running pod without restarting the pod or its containers. A Kubernetes node allocates resources for a pod based on its requests, and restricts the pod's resource usage based on the limits specified in the pod's containers.

For in-place resize of pod resources:

Container's resource requests and limits are mutable for CPU and memory resources.
allocatedResources field in containerStatuses of the Pod's status reflects the resources allocated to the pod's containers.
resources field in containerStatuses of the Pod's status reflects the actual resource requests and limits that are configured on the running containers as reported by the container runtime.
resize field in the Pod's status shows the status of the last requested pending resize. It can have the following values:
- Proposed: This value indicates an acknowledgement of the requested resize and that the request was validated and recorded.
- InProgress: This value indicates that the node has accepted the resize request and is in the process of applying it to the pod's containers.
- Deferred: This value means that the requested resize cannot be granted at this time, and the node will keep retrying. The resize may be granted when other pods leave and free up node resources.
- Infeasible: is a signal that the node cannot accommodate the requested resize. This can happen if the requested resize exceeds the maximum resources the node can ever allocate for a pod.

Before you begin

Your Kubernetes server must be at or later than version 1.27. To check the version, enter kubectl version.

Container Resize Policies

Resize policies allow for a more fine-grained control over how pod's containers are resized for CPU and memory resources. For example, the container's application may be able to handle CPU resources resized without being restarted, but resizing memory may require that the application hence the containers be restarted.

To enable this, the Container specification allows users to specify a resizePolicy. The following restart policies can be specified for resizing CPU and memory:

NotRequired: Resize the container's resources while it is running.
RestartContainer: Restart the container and apply new resources upon restart.

If resizePolicy[*].restartPolicy is not specified, it defaults to NotRequired.

Note: If the Pod's restartPolicy is Never, container's resize restart policy must be set to NotRequired for all Containers in the Pod.

Below example shows a Pod whose Container's CPU can be resized without restart, but resizing memory requires the container to be restarted.

apiVersion: v1
kind: Pod
metadata:
  name: qos-demo-5
  namespace: qos-example
spec:
  containers:
  - name: qos-demo-ctr-5
    image: nginx
    resizePolicy:
    - resourceName: cpu
      restartPolicy: NotRequired
    - resourceName: memory
      restartPolicy: RestartContainer
    resources:
      limits:
        memory: "200Mi"
        cpu: "700m"
      requests:
        memory: "200Mi"
        cpu: "700m"

Note: In the above example, if desired requests or limits for both CPU and memory have changed, the container will be restarted in order to resize its memory.

Create a pod with resource requests and limits

You can create a Guaranteed or Burstable Quality of Service class pod by specifying requests and/or limits for a pod's containers.

Consider the following manifest for a Pod that has one Container.

pods/qos/qos-pod-5.yaml

apiVersion: v1
kind: Pod
metadata:
  name: qos-demo-5
  namespace: qos-example
spec:
  containers:
  - name: qos-demo-ctr-5
    image: nginx
    resources:
      limits:
        memory: "200Mi"
        cpu: "700m"
      requests:
        memory: "200Mi"
        cpu: "700m"

Create the pod in the qos-example namespace:

kubectl create namespace qos-example
kubectl create -f https://k8s.io/examples/pods/qos/qos-pod-5.yaml

This pod is classified as a Guaranteed QoS class requesting 700m CPU and 200Mi memory.

View detailed information about the pod:

kubectl get pod qos-demo-5 --output=yaml --namespace=qos-example

Also notice that the values of resizePolicy[*].restartPolicy defaulted to NotRequired, indicating that CPU and memory can be resized while container is running.

spec:
  containers:
    ...
    resizePolicy:
    - resourceName: cpu
      restartPolicy: NotRequired
    - resourceName: memory
      restartPolicy: NotRequired
    resources:
      limits:
        cpu: 700m
        memory: 200Mi
      requests:
        cpu: 700m
        memory: 200Mi
...
  containerStatuses:
...
    name: qos-demo-ctr-5
    ready: true
...
    allocatedResources:
      cpu: 700m
      memory: 200Mi
    resources:
      limits:
        cpu: 700m
        memory: 200Mi
      requests:
        cpu: 700m
        memory: 200Mi
    restartCount: 0
    started: true
...
  qosClass: Guaranteed

Updating the pod's resources

Let's say the CPU requirements have increased, and 0.8 CPU is now desired. This is typically determined, and may be programmatically applied, by an entity such as VerticalPodAutoscaler (VPA).

Note: While you can change a Pod's requests and limits to express new desired resources, you cannot change the QoS class in which the Pod was created.

Now, patch the Pod's Container with CPU requests & limits both set to 800m:

kubectl -n qos-example patch pod qos-demo-5 --patch '{"spec":{"containers":[{"name":"qos-demo-ctr-5", "resources":{"requests":{"cpu":"800m"}, "limits":{"cpu":"800m"}}}]}}'

Query the Pod's detailed information after the Pod has been patched.

kubectl get pod qos-demo-5 --output=yaml --namespace=qos-example

The Pod's spec below reflects the updated CPU requests and limits.

spec:
  containers:
    ...
    resources:
      limits:
        cpu: 800m
        memory: 200Mi
      requests:
        cpu: 800m
        memory: 200Mi
...
  containerStatuses:
...
    allocatedResources:
      cpu: 800m
      memory: 200Mi
    resources:
      limits:
        cpu: 800m
        memory: 200Mi
      requests:
        cpu: 800m
        memory: 200Mi
    restartCount: 0
    started: true

Observe that the allocatedResources values have been updated to reflect the new desired CPU requests. This indicates that node was able to accommodate the increased CPU resource needs.

In the Container's status, updated CPU resource values shows that new CPU resources have been applied. The Container's restartCount remains unchanged, indicating that container's CPU resources were resized without restarting the container.

Clean up

Delete your namespace:

kubectl delete namespace qos-example

What's next

For application developers

For cluster administrators

5 - Configure RunAsUserName for Windows pods and containers

FEATURE STATE: Kubernetes v1.18 [stable]

This page shows how to use the runAsUserName setting for Pods and containers that will run on Windows nodes. This is roughly equivalent of the Linux-specific runAsUser setting, allowing you to run applications in a container as a different username than the default.

Before you begin

You need to have a Kubernetes cluster and the kubectl command-line tool must be configured to communicate with your cluster. The cluster is expected to have Windows worker nodes where pods with containers running Windows workloads will get scheduled.

Set the Username for a Pod

To specify the username with which to execute the Pod's container processes, include the securityContext field (PodSecurityContext) in the Pod specification, and within it, the windowsOptions (WindowsSecurityContextOptions) field containing the runAsUserName field.

The Windows security context options that you specify for a Pod apply to all Containers and init Containers in the Pod.

Here is a configuration file for a Windows Pod that has the runAsUserName field set:

windows/run-as-username-pod.yaml

apiVersion: v1
kind: Pod
metadata:
  name: run-as-username-pod-demo
spec:
  securityContext:
    windowsOptions:
      runAsUserName: "ContainerUser"
  containers:
  - name: run-as-username-demo
    image: mcr.microsoft.com/windows/servercore:ltsc2019
    command: ["ping", "-t", "localhost"]
  nodeSelector:
    kubernetes.io/os: windows

Create the Pod:

kubectl apply -f https://k8s.io/examples/windows/run-as-username-pod.yaml

Verify that the Pod's Container is running:

kubectl get pod run-as-username-pod-demo

Get a shell to the running Container:

kubectl exec -it run-as-username-pod-demo -- powershell

Check that the shell is running user the correct username:

echo $env:USERNAME

The output should be:

ContainerUser

Set the Username for a Container

To specify the username with which to execute a Container's processes, include the securityContext field (SecurityContext) in the Container manifest, and within it, the windowsOptions (WindowsSecurityContextOptions) field containing the runAsUserName field.

The Windows security context options that you specify for a Container apply only to that individual Container, and they override the settings made at the Pod level.

Here is the configuration file for a Pod that has one Container, and the runAsUserName field is set at the Pod level and the Container level:

windows/run-as-username-container.yaml

apiVersion: v1
kind: Pod
metadata:
  name: run-as-username-container-demo
spec:
  securityContext:
    windowsOptions:
      runAsUserName: "ContainerUser"
  containers:
  - name: run-as-username-demo
    image: mcr.microsoft.com/windows/servercore:ltsc2019
    command: ["ping", "-t", "localhost"]
    securityContext:
        windowsOptions:
            runAsUserName: "ContainerAdministrator"
  nodeSelector:
    kubernetes.io/os: windows

Create the Pod:

kubectl apply -f https://k8s.io/examples/windows/run-as-username-container.yaml

Verify that the Pod's Container is running:

kubectl get pod run-as-username-container-demo

Get a shell to the running Container:

kubectl exec -it run-as-username-container-demo -- powershell

Check that the shell is running user the correct username (the one set at the Container level):

echo $env:USERNAME

The output should be:

ContainerAdministrator

Windows Username limitations

In order to use this feature, the value set in the runAsUserName field must be a valid username. It must have the following format: DOMAIN\USER, where DOMAIN\ is optional. Windows user names are case insensitive. Additionally, there are some restrictions regarding the DOMAIN and USER:

The runAsUserName field cannot be empty, and it cannot contain control characters (ASCII values: 0x00-0x1F, 0x7F)
The DOMAIN must be either a NetBios name, or a DNS name, each with their own restrictions:
- NetBios names: maximum 15 characters, cannot start with . (dot), and cannot contain the following characters: \ / : * ? " < > |
- DNS names: maximum 255 characters, contains only alphanumeric characters, dots, and dashes, and it cannot start or end with a . (dot) or - (dash).
The USER must have at most 20 characters, it cannot contain only dots or spaces, and it cannot contain the following characters: " / \ [ ] : ; | = , + * ? < > @.

Examples of acceptable values for the runAsUserName field: ContainerAdministrator, ContainerUser, NT AUTHORITY\NETWORK SERVICE, NT AUTHORITY\LOCAL SERVICE.

For more information about these limtations, check here and here.

What's next

6 - Create a Windows HostProcess Pod

FEATURE STATE: Kubernetes v1.26 [stable]

Windows HostProcess containers enable you to run containerized workloads on a Windows host. These containers operate as normal processes but have access to the host network namespace, storage, and devices when given the appropriate user privileges. HostProcess containers can be used to deploy network plugins, storage configurations, device plugins, kube-proxy, and other components to Windows nodes without the need for dedicated proxies or the direct installation of host services.

Administrative tasks such as installation of security patches, event log collection, and more can be performed without requiring cluster operators to log onto each Windows node. HostProcess containers can run as any user that is available on the host or is in the domain of the host machine, allowing administrators to restrict resource access through user permissions. While neither filesystem or process isolation are supported, a new volume is created on the host upon starting the container to give it a clean and consolidated workspace. HostProcess containers can also be built on top of existing Windows base images and do not inherit the same compatibility requirements as Windows server containers, meaning that the version of the base images does not need to match that of the host. It is, however, recommended that you use the same base image version as your Windows Server container workloads to ensure you do not have any unused images taking up space on the node. HostProcess containers also support volume mounts within the container volume.

When should I use a Windows HostProcess container?

When you need to perform tasks which require the networking namespace of the host. HostProcess containers have access to the host's network interfaces and IP addresses.
You need access to resources on the host such as the filesystem, event logs, etc.
Installation of specific device drivers or Windows services.
Consolidation of administrative tasks and security policies. This reduces the degree of privileges needed by Windows nodes.

Before you begin

This task guide is specific to Kubernetes v1.28. If you are not running Kubernetes v1.28, check the documentation for that version of Kubernetes.

In Kubernetes 1.28, the HostProcess container feature is enabled by default. The kubelet will communicate with containerd directly by passing the hostprocess flag via CRI. You can use the latest version of containerd (v1.6+) to run HostProcess containers. How to install containerd.

Limitations

These limitations are relevant for Kubernetes v1.28:

HostProcess containers require containerd 1.6 or higher container runtime and containerd 1.7 is recommended.
HostProcess pods can only contain HostProcess containers. This is a current limitation of the Windows OS; non-privileged Windows containers cannot share a vNIC with the host IP namespace.
HostProcess containers run as a process on the host and do not have any degree of isolation other than resource constraints imposed on the HostProcess user account. Neither filesystem or Hyper-V isolation are supported for HostProcess containers.
Volume mounts are supported and are mounted under the container volume. See Volume Mounts
A limited set of host user accounts are available for HostProcess containers by default. See Choosing a User Account.
Resource limits (disk, memory, cpu count) are supported in the same fashion as processes on the host.
Both Named pipe mounts and Unix domain sockets are not supported and should instead be accessed via their path on the host (e.g. \\.\pipe\*)

HostProcess Pod configuration requirements

Enabling a Windows HostProcess pod requires setting the right configurations in the pod security configuration. Of the policies defined in the Pod Security Standards HostProcess pods are disallowed by the baseline and restricted policies. It is therefore recommended that HostProcess pods run in alignment with the privileged profile.

When running under the privileged policy, here are the configurations which need to be set to enable the creation of a HostProcess pod:

Privileged policy specification
Control	Policy
`securityContext.windowsOptions.hostProcess`	Windows pods offer the ability to run HostProcess containers which enables privileged access to the Windows node. Allowed Values `true`
`hostNetwork`	Pods container HostProcess containers must use the host's network namespace. Allowed Values `true`
`securityContext.windowsOptions.runAsUserName`	Specification of which user the HostProcess container should run as is required for the pod spec. Allowed Values `NT AUTHORITY\SYSTEM` `NT AUTHORITY\Local service` `NT AUTHORITY\NetworkService` Local usergroup names (see below)
`runAsNonRoot`	Because HostProcess containers have privileged access to the host, the `runAsNonRoot` field cannot be set to true. Allowed Values Undefined/Nil `false`

Example manifest (excerpt)

spec:
  securityContext:
    windowsOptions:
      hostProcess: true
      runAsUserName: "NT AUTHORITY\\Local service"
  hostNetwork: true
  containers:
  - name: test
    image: image1:latest
    command:
      - ping
      - -t
      - 127.0.0.1
  nodeSelector:
    "kubernetes.io/os": windows

Volume mounts

HostProcess containers support the ability to mount volumes within the container volume space. Volume mount behavior differs depending on the version of containerd runtime used by on the node.

Containerd v1.6

Applications running inside the container can access volume mounts directly via relative or absolute paths. An environment variable $CONTAINER_SANDBOX_MOUNT_POINT is set upon container creation and provides the absolute host path to the container volume. Relative paths are based upon the .spec.containers.volumeMounts.mountPath configuration.

To access service account tokens (for example) the following path structures are supported within the container:

.\var\run\secrets\kubernetes.io\serviceaccount\
$CONTAINER_SANDBOX_MOUNT_POINT\var\run\secrets\kubernetes.io\serviceaccount\

Containerd v1.7 (and greater)

Applications running inside the container can access volume mounts directly via the volumeMount's specified mountPath (just like Linux and non-HostProcess Windows containers).

For backwards compatibility volumes can also be accessed via using the same relative paths configured by containerd v1.6.

As an example, to access service account tokens within the container you would use one of the following paths:

c:\var\run\secrets\kubernetes.io\serviceaccount
/var/run/secrets/kubernetes.io/serviceaccount/
$CONTAINER_SANDBOX_MOUNT_POINT\var\run\secrets\kubernetes.io\serviceaccount\

Resource limits

Resource limits (disk, memory, cpu count) are applied to the job and are job wide. For example, with a limit of 10MB set, the memory allocated for any HostProcess job object will be capped at 10MB. This is the same behavior as other Windows container types. These limits would be specified the same way they are currently for whatever orchestrator or runtime is being used. The only difference is in the disk resource usage calculation used for resource tracking due to the difference in how HostProcess containers are bootstrapped.

Choosing a user account

System accounts

By default, HostProcess containers support the ability to run as one of three supported Windows service accounts:

You should select an appropriate Windows service account for each HostProcess container, aiming to limit the degree of privileges so as to avoid accidental (or even malicious) damage to the host. The LocalSystem service account has the highest level of privilege of the three and should be used only if absolutely necessary. Where possible, use the LocalService service account as it is the least privileged of the three options.

Local accounts

If configured, HostProcess containers can also run as local user accounts which allows for node operators to give fine-grained access to workloads.

To run HostProcess containers as a local user; A local usergroup must first be created on the node and the name of that local usergroup must be specified in the runAsUserName field in the deployment. Prior to initializing the HostProcess container, a new ephemeral local user account to be created and joined to the specified usergroup, from which the container is run. This provides a number a benefits including eliminating the need to manage passwords for local user accounts. An initial HostProcess container running as a service account can be used to prepare the user groups for later HostProcess containers.

Note: Running HostProcess containers as local user accounts requires containerd v1.7+

Example:

Create a local user group on the node (this can be done in another HostProcess container).
```
net localgroup hpc-localgroup /add
```
Grant access to desired resources on the node to the local usergroup. This can be done with tools like icacls.

Set runAsUserName to the name of the local usergroup for the pod or individual containers.

securityContext:
  windowsOptions:
    hostProcess: true
    runAsUserName: hpc-localgroup

Schedule the pod!

Base Image for HostProcess Containers

HostProcess containers can be built from any of the existing Windows Container base images.

Additionally a new base mage has been created just for HostProcess containers! For more information please check out the windows-host-process-containers-base-image github project.

Troubleshooting HostProcess containers

HostProcess containers fail to start with failed to create user process token: failed to logon user: Access is denied.: unknown

Ensure containerd is running as LocalSystem or LocalService service accounts. User accounts (even Administrator accounts) do not have permissions to create logon tokens for any of the supported user accounts.

7 - Configure Quality of Service for Pods

This page shows how to configure Pods so that they will be assigned particular Quality of Service (QoS) classes. Kubernetes uses QoS classes to make decisions about evicting Pods when Node resources are exceeded.

When Kubernetes creates a Pod it assigns one of these QoS classes to the Pod:

Before you begin

You also need to be able to create and delete namespaces.

Create a namespace

Create a namespace so that the resources you create in this exercise are isolated from the rest of your cluster.

kubectl create namespace qos-example

Create a Pod that gets assigned a QoS class of Guaranteed

For a Pod to be given a QoS class of Guaranteed:

Every Container in the Pod must have a memory limit and a memory request.
For every Container in the Pod, the memory limit must equal the memory request.
Every Container in the Pod must have a CPU limit and a CPU request.
For every Container in the Pod, the CPU limit must equal the CPU request.

These restrictions apply to init containers and app containers equally. Ephemeral containers cannot define resources so these restrictions do not apply.

Here is a manifest for a Pod that has one Container. The Container has a memory limit and a memory request, both equal to 200 MiB. The Container has a CPU limit and a CPU request, both equal to 700 milliCPU:

pods/qos/qos-pod.yaml

apiVersion: v1
kind: Pod
metadata:
  name: qos-demo
  namespace: qos-example
spec:
  containers:
  - name: qos-demo-ctr
    image: nginx
    resources:
      limits:
        memory: "200Mi"
        cpu: "700m"
      requests:
        memory: "200Mi"
        cpu: "700m"

Create the Pod:

kubectl apply -f https://k8s.io/examples/pods/qos/qos-pod.yaml --namespace=qos-example

View detailed information about the Pod:

kubectl get pod qos-demo --namespace=qos-example --output=yaml

The output shows that Kubernetes gave the Pod a QoS class of Guaranteed. The output also verifies that the Pod Container has a memory request that matches its memory limit, and it has a CPU request that matches its CPU limit.

spec:
  containers:
    ...
    resources:
      limits:
        cpu: 700m
        memory: 200Mi
      requests:
        cpu: 700m
        memory: 200Mi
    ...
status:
  qosClass: Guaranteed

Note: If a Container specifies its own memory limit, but does not specify a memory request, Kubernetes automatically assigns a memory request that matches the limit. Similarly, if a Container specifies its own CPU limit, but does not specify a CPU request, Kubernetes automatically assigns a CPU request that matches the limit.

Clean up

Delete your Pod:

kubectl delete pod qos-demo --namespace=qos-example

Create a Pod that gets assigned a QoS class of Burstable

A Pod is given a QoS class of Burstable if:

The Pod does not meet the criteria for QoS class Guaranteed.
At least one Container in the Pod has a memory or CPU request or limit.

Here is a manifest for a Pod that has one Container. The Container has a memory limit of 200 MiB and a memory request of 100 MiB.

pods/qos/qos-pod-2.yaml

apiVersion: v1
kind: Pod
metadata:
  name: qos-demo-2
  namespace: qos-example
spec:
  containers:
  - name: qos-demo-2-ctr
    image: nginx
    resources:
      limits:
        memory: "200Mi"
      requests:
        memory: "100Mi"

Create the Pod:

kubectl apply -f https://k8s.io/examples/pods/qos/qos-pod-2.yaml --namespace=qos-example

View detailed information about the Pod:

kubectl get pod qos-demo-2 --namespace=qos-example --output=yaml

The output shows that Kubernetes gave the Pod a QoS class of Burstable:

spec:
  containers:
  - image: nginx
    imagePullPolicy: Always
    name: qos-demo-2-ctr
    resources:
      limits:
        memory: 200Mi
      requests:
        memory: 100Mi
  ...
status:
  qosClass: Burstable

Clean up

Delete your Pod:

kubectl delete pod qos-demo-2 --namespace=qos-example

Create a Pod that gets assigned a QoS class of BestEffort

For a Pod to be given a QoS class of BestEffort, the Containers in the Pod must not have any memory or CPU limits or requests.

Here is a manifest for a Pod that has one Container. The Container has no memory or CPU limits or requests:

pods/qos/qos-pod-3.yaml

apiVersion: v1
kind: Pod
metadata:
  name: qos-demo-3
  namespace: qos-example
spec:
  containers:
  - name: qos-demo-3-ctr
    image: nginx

Create the Pod:

kubectl apply -f https://k8s.io/examples/pods/qos/qos-pod-3.yaml --namespace=qos-example

View detailed information about the Pod:

kubectl get pod qos-demo-3 --namespace=qos-example --output=yaml

The output shows that Kubernetes gave the Pod a QoS class of BestEffort:

spec:
  containers:
    ...
    resources: {}
  ...
status:
  qosClass: BestEffort

Clean up

Delete your Pod:

kubectl delete pod qos-demo-3 --namespace=qos-example

Create a Pod that has two Containers

Here is a manifest for a Pod that has two Containers. One container specifies a memory request of 200 MiB. The other Container does not specify any requests or limits.

pods/qos/qos-pod-4.yaml

apiVersion: v1
kind: Pod
metadata:
  name: qos-demo-4
  namespace: qos-example
spec:
  containers:

  - name: qos-demo-4-ctr-1
    image: nginx
    resources:
      requests:
        memory: "200Mi"

  - name: qos-demo-4-ctr-2
    image: redis

Notice that this Pod meets the criteria for QoS class Burstable. That is, it does not meet the criteria for QoS class Guaranteed, and one of its Containers has a memory request.

Create the Pod:

kubectl apply -f https://k8s.io/examples/pods/qos/qos-pod-4.yaml --namespace=qos-example

View detailed information about the Pod:

kubectl get pod qos-demo-4 --namespace=qos-example --output=yaml

The output shows that Kubernetes gave the Pod a QoS class of Burstable:

spec:
  containers:
    ...
    name: qos-demo-4-ctr-1
    resources:
      requests:
        memory: 200Mi
    ...
    name: qos-demo-4-ctr-2
    resources: {}
    ...
status:
  qosClass: Burstable

Retrieve the QoS class for a Pod

Rather than see all the fields, you can view just the field you need:

kubectl --namespace=qos-example get pod qos-demo-4 -o jsonpath='{ .status.qosClass}{"\n"}'

Burstable

Clean up

Delete your namespace:

kubectl delete namespace qos-example

What's next

For app developers

For cluster administrators

8 - Assign Extended Resources to a Container

FEATURE STATE: Kubernetes v1.28 [stable]

This page shows how to assign extended resources to a Container.

Before you begin

To check the version, enter kubectl version.

Before you do this exercise, do the exercise in Advertise Extended Resources for a Node. That will configure one of your Nodes to advertise a dongle resource.

Assign an extended resource to a Pod

To request an extended resource, include the resources:requests field in your Container manifest. Extended resources are fully qualified with any domain outside of *.kubernetes.io/. Valid extended resource names have the form example.com/foo where example.com is replaced with your organization's domain and foo is a descriptive resource name.

Here is the configuration file for a Pod that has one Container:

pods/resource/extended-resource-pod.yaml

apiVersion: v1
kind: Pod
metadata:
  name: extended-resource-demo
spec:
  containers:
  - name: extended-resource-demo-ctr
    image: nginx
    resources:
      requests:
        example.com/dongle: 3
      limits:
        example.com/dongle: 3

In the configuration file, you can see that the Container requests 3 dongles.

Create a Pod:

kubectl apply -f https://k8s.io/examples/pods/resource/extended-resource-pod.yaml

Verify that the Pod is running:

kubectl get pod extended-resource-demo

Describe the Pod:

kubectl describe pod extended-resource-demo

The output shows dongle requests:

Limits:
  example.com/dongle: 3
Requests:
  example.com/dongle: 3

Attempt to create a second Pod

Here is the configuration file for a Pod that has one Container. The Container requests two dongles.

pods/resource/extended-resource-pod-2.yaml

apiVersion: v1
kind: Pod
metadata:
  name: extended-resource-demo-2
spec:
  containers:
  - name: extended-resource-demo-2-ctr
    image: nginx
    resources:
      requests:
        example.com/dongle: 2
      limits:
        example.com/dongle: 2

Kubernetes will not be able to satisfy the request for two dongles, because the first Pod used three of the four available dongles.

Attempt to create a Pod:

kubectl apply -f https://k8s.io/examples/pods/resource/extended-resource-pod-2.yaml

Describe the Pod

kubectl describe pod extended-resource-demo-2

The output shows that the Pod cannot be scheduled, because there is no Node that has 2 dongles available:

Conditions:
  Type    Status
  PodScheduled  False
...
Events:
  ...
  ... Warning   FailedScheduling  pod (extended-resource-demo-2) failed to fit in any node
fit failure summary on nodes : Insufficient example.com/dongle (1)

View the Pod status:

kubectl get pod extended-resource-demo-2

The output shows that the Pod was created, but not scheduled to run on a Node. It has a status of Pending:

NAME                       READY     STATUS    RESTARTS   AGE
extended-resource-demo-2   0/1       Pending   0          6m

Clean up

Delete the Pods that you created for this exercise:

kubectl delete pod extended-resource-demo
kubectl delete pod extended-resource-demo-2

What's next

For application developers

For cluster administrators

Advertise Extended Resources for a Node

9 - Configure a Pod to Use a Volume for Storage

This page shows how to configure a Pod to use a Volume for storage.

A Container's file system lives only as long as the Container does. So when a Container terminates and restarts, filesystem changes are lost. For more consistent storage that is independent of the Container, you can use a Volume. This is especially important for stateful applications, such as key-value stores (such as Redis) and databases.

Before you begin

To check the version, enter kubectl version.

Configure a volume for a Pod

In this exercise, you create a Pod that runs one Container. This Pod has a Volume of type emptyDir that lasts for the life of the Pod, even if the Container terminates and restarts. Here is the configuration file for the Pod:

pods/storage/redis.yaml

apiVersion: v1
kind: Pod
metadata:
  name: redis
spec:
  containers:
  - name: redis
    image: redis
    volumeMounts:
    - name: redis-storage
      mountPath: /data/redis
  volumes:
  - name: redis-storage
    emptyDir: {}

Create the Pod:

kubectl apply -f https://k8s.io/examples/pods/storage/redis.yaml

Verify that the Pod's Container is running, and then watch for changes to the Pod:

kubectl get pod redis --watch

The output looks like this:

NAME      READY     STATUS    RESTARTS   AGE
redis     1/1       Running   0          13s

In another terminal, get a shell to the running Container:
```
kubectl exec -it redis -- /bin/bash
```

In your shell, go to /data/redis, and then create a file:

root@redis:/data# cd /data/redis/
root@redis:/data/redis# echo Hello > test-file

In your shell, list the running processes:

root@redis:/data/redis# apt-get update
root@redis:/data/redis# apt-get install procps
root@redis:/data/redis# ps aux

The output is similar to this:

USER       PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
redis        1  0.1  0.1  33308  3828 ?        Ssl  00:46   0:00 redis-server *:6379
root        12  0.0  0.0  20228  3020 ?        Ss   00:47   0:00 /bin/bash
root        15  0.0  0.0  17500  2072 ?        R+   00:48   0:00 ps aux

In your shell, kill the Redis process:
```
root@redis:/data/redis# kill <pid>
```
where <pid> is the Redis process ID (PID).

In your original terminal, watch for changes to the Redis Pod. Eventually, you will see something like this:

NAME      READY     STATUS     RESTARTS   AGE
redis     1/1       Running    0          13s
redis     0/1       Completed  0         6m
redis     1/1       Running    1         6m

At this point, the Container has terminated and restarted. This is because the Redis Pod has a restartPolicy of Always.

Get a shell into the restarted Container:
```
kubectl exec -it redis -- /bin/bash
```

In your shell, go to /data/redis, and verify that test-file is still there.

root@redis:/data/redis# cd /data/redis/
root@redis:/data/redis# ls
test-file

Delete the Pod that you created for this exercise:
```
kubectl delete pod redis
```

What's next

See Volume.
See Pod.
In addition to the local disk storage provided by emptyDir, Kubernetes supports many different network-attached storage solutions, including PD on GCE and EBS on EC2, which are preferred for critical data and will handle details such as mounting and unmounting the devices on the nodes. See Volumes for more details.

10 - Configure a Pod to Use a PersistentVolume for Storage

This page shows you how to configure a Pod to use a PersistentVolumeClaim for storage. Here is a summary of the process:

You, as cluster administrator, create a PersistentVolume backed by physical storage. You do not associate the volume with any Pod.
You, now taking the role of a developer / cluster user, create a PersistentVolumeClaim that is automatically bound to a suitable PersistentVolume.
You create a Pod that uses the above PersistentVolumeClaim for storage.

Before you begin

You need to have a Kubernetes cluster that has only one Node, and the kubectl command-line tool must be configured to communicate with your cluster. If you do not already have a single-node cluster, you can create one by using Minikube.
Familiarize yourself with the material in Persistent Volumes.

Create an index.html file on your Node

Open a shell to the single Node in your cluster. How you open a shell depends on how you set up your cluster. For example, if you are using Minikube, you can open a shell to your Node by entering minikube ssh.

In your shell on that Node, create a /mnt/data directory:

# This assumes that your Node uses "sudo" to run commands
# as the superuser
sudo mkdir /mnt/data

In the /mnt/data directory, create an index.html file:

# This again assumes that your Node uses "sudo" to run commands
# as the superuser
sudo sh -c "echo 'Hello from Kubernetes storage' > /mnt/data/index.html"

Note: If your Node uses a tool for superuser access other than sudo, you can usually make this work if you replace sudo with the name of the other tool.

Test that the index.html file exists:

cat /mnt/data/index.html

The output should be:

Hello from Kubernetes storage

You can now close the shell to your Node.

Create a PersistentVolume

In this exercise, you create a hostPath PersistentVolume. Kubernetes supports hostPath for development and testing on a single-node cluster. A hostPath PersistentVolume uses a file or directory on the Node to emulate network-attached storage.

In a production cluster, you would not use hostPath. Instead a cluster administrator would provision a network resource like a Google Compute Engine persistent disk, an NFS share, or an Amazon Elastic Block Store volume. Cluster administrators can also use StorageClasses to set up dynamic provisioning.

Here is the configuration file for the hostPath PersistentVolume:

pods/storage/pv-volume.yaml

apiVersion: v1
kind: PersistentVolume
metadata:
  name: task-pv-volume
  labels:
    type: local
spec:
  storageClassName: manual
  capacity:
    storage: 10Gi
  accessModes:
    - ReadWriteOnce
  hostPath:
    path: "/mnt/data"

The configuration file specifies that the volume is at /mnt/data on the cluster's Node. The configuration also specifies a size of 10 gibibytes and an access mode of ReadWriteOnce, which means the volume can be mounted as read-write by a single Node. It defines the StorageClass name manual for the PersistentVolume, which will be used to bind PersistentVolumeClaim requests to this PersistentVolume.

Create the PersistentVolume:

kubectl apply -f https://k8s.io/examples/pods/storage/pv-volume.yaml

View information about the PersistentVolume:

kubectl get pv task-pv-volume

The output shows that the PersistentVolume has a STATUS of Available. This means it has not yet been bound to a PersistentVolumeClaim.

NAME             CAPACITY   ACCESSMODES   RECLAIMPOLICY   STATUS      CLAIM     STORAGECLASS   REASON    AGE
task-pv-volume   10Gi       RWO           Retain          Available             manual                   4s

Create a PersistentVolumeClaim

The next step is to create a PersistentVolumeClaim. Pods use PersistentVolumeClaims to request physical storage. In this exercise, you create a PersistentVolumeClaim that requests a volume of at least three gibibytes that can provide read-write access for at most one Node at a time.

Here is the configuration file for the PersistentVolumeClaim:

pods/storage/pv-claim.yaml

apiVersion: v1
kind: PersistentVolumeClaim
metadata:
  name: task-pv-claim
spec:
  storageClassName: manual
  accessModes:
    - ReadWriteOnce
  resources:
    requests:
      storage: 3Gi

Create the PersistentVolumeClaim:

kubectl apply -f https://k8s.io/examples/pods/storage/pv-claim.yaml

After you create the PersistentVolumeClaim, the Kubernetes control plane looks for a PersistentVolume that satisfies the claim's requirements. If the control plane finds a suitable PersistentVolume with the same StorageClass, it binds the claim to the volume.

Look again at the PersistentVolume:

kubectl get pv task-pv-volume

Now the output shows a STATUS of Bound.

NAME             CAPACITY   ACCESSMODES   RECLAIMPOLICY   STATUS    CLAIM                   STORAGECLASS   REASON    AGE
task-pv-volume   10Gi       RWO           Retain          Bound     default/task-pv-claim   manual                   2m

Look at the PersistentVolumeClaim:

kubectl get pvc task-pv-claim

The output shows that the PersistentVolumeClaim is bound to your PersistentVolume, task-pv-volume.

NAME            STATUS    VOLUME           CAPACITY   ACCESSMODES   STORAGECLASS   AGE
task-pv-claim   Bound     task-pv-volume   10Gi       RWO           manual         30s

Create a Pod

The next step is to create a Pod that uses your PersistentVolumeClaim as a volume.

Here is the configuration file for the Pod:

pods/storage/pv-pod.yaml

apiVersion: v1
kind: Pod
metadata:
  name: task-pv-pod
spec:
  volumes:
    - name: task-pv-storage
      persistentVolumeClaim:
        claimName: task-pv-claim
  containers:
    - name: task-pv-container
      image: nginx
      ports:
        - containerPort: 80
          name: "http-server"
      volumeMounts:
        - mountPath: "/usr/share/nginx/html"
          name: task-pv-storage

Notice that the Pod's configuration file specifies a PersistentVolumeClaim, but it does not specify a PersistentVolume. From the Pod's point of view, the claim is a volume.

Create the Pod:

kubectl apply -f https://k8s.io/examples/pods/storage/pv-pod.yaml

Verify that the container in the Pod is running;

kubectl get pod task-pv-pod

Get a shell to the container running in your Pod:

kubectl exec -it task-pv-pod -- /bin/bash

In your shell, verify that nginx is serving the index.html file from the hostPath volume:

# Be sure to run these 3 commands inside the root shell that comes from
# running "kubectl exec" in the previous step
apt update
apt install curl
curl http://localhost/

The output shows the text that you wrote to the index.html file on the hostPath volume:

Hello from Kubernetes storage

If you see that message, you have successfully configured a Pod to use storage from a PersistentVolumeClaim.

Clean up

Delete the Pod, the PersistentVolumeClaim and the PersistentVolume:

kubectl delete pod task-pv-pod
kubectl delete pvc task-pv-claim
kubectl delete pv task-pv-volume

If you don't already have a shell open to the Node in your cluster, open a new shell the same way that you did earlier.

In the shell on your Node, remove the file and directory that you created:

# This assumes that your Node uses "sudo" to run commands
# as the superuser
sudo rm /mnt/data/index.html
sudo rmdir /mnt/data

You can now close the shell to your Node.

Mounting the same persistentVolume in two places

pods/storage/pv-duplicate.yaml


apiVersion: v1
kind: Pod
metadata:
  name: test
spec:
  containers:
    - name: test
      image: nginx
      volumeMounts:
        # a mount for site-data
        - name: config
          mountPath: /usr/share/nginx/html
          subPath: html
        # another mount for nginx config
        - name: config
          mountPath: /etc/nginx/nginx.conf
          subPath: nginx.conf
  volumes:
    - name: config
      persistentVolumeClaim:
        claimName: test-nfs-claim

You can perform 2 volume mounts on your nginx container:

/usr/share/nginx/html for the static website
/etc/nginx/nginx.conf for the default config

Access control

Storage configured with a group ID (GID) allows writing only by Pods using the same GID. Mismatched or missing GIDs cause permission denied errors. To reduce the need for coordination with users, an administrator can annotate a PersistentVolume with a GID. Then the GID is automatically added to any Pod that uses the PersistentVolume.

Use the pv.beta.kubernetes.io/gid annotation as follows:

apiVersion: v1
kind: PersistentVolume
metadata:
  name: pv1
  annotations:
    pv.beta.kubernetes.io/gid: "1234"

When a Pod consumes a PersistentVolume that has a GID annotation, the annotated GID is applied to all containers in the Pod in the same way that GIDs specified in the Pod's security context are. Every GID, whether it originates from a PersistentVolume annotation or the Pod's specification, is applied to the first process run in each container.

Note: When a Pod consumes a PersistentVolume, the GIDs associated with the PersistentVolume are not present on the Pod resource itself.

What's next

Learn more about PersistentVolumes.
Read the Persistent Storage design document.

Reference

11 - Configure a Pod to Use a Projected Volume for Storage

This page shows how to use a projected Volume to mount several existing volume sources into the same directory. Currently, secret, configMap, downwardAPI, and serviceAccountToken volumes can be projected.

Note: serviceAccountToken is not a volume type.

Before you begin

To check the version, enter kubectl version.

Configure a projected volume for a pod

In this exercise, you create username and password Secrets from local files. You then create a Pod that runs one container, using a projected Volume to mount the Secrets into the same shared directory.

Here is the configuration file for the Pod:

pods/storage/projected.yaml

apiVersion: v1
kind: Pod
metadata:
  name: test-projected-volume
spec:
  containers:
  - name: test-projected-volume
    image: busybox:1.28
    args:
    - sleep
    - "86400"
    volumeMounts:
    - name: all-in-one
      mountPath: "/projected-volume"
      readOnly: true
  volumes:
  - name: all-in-one
    projected:
      sources:
      - secret:
          name: user
      - secret:
          name: pass

Create the Secrets:

# Create files containing the username and password:
echo -n "admin" > ./username.txt
echo -n "1f2d1e2e67df" > ./password.txt

# Package these files into secrets:
kubectl create secret generic user --from-file=./username.txt
kubectl create secret generic pass --from-file=./password.txt

Create the Pod:

kubectl apply -f https://k8s.io/examples/pods/storage/projected.yaml

Verify that the Pod's container is running, and then watch for changes to the Pod:

kubectl get --watch pod test-projected-volume

The output looks like this:

NAME                    READY     STATUS    RESTARTS   AGE
test-projected-volume   1/1       Running   0          14s

In another terminal, get a shell to the running container:
```
kubectl exec -it test-projected-volume -- /bin/sh
```
In your shell, verify that the projected-volume directory contains your projected sources:
```
ls /projected-volume/
```

Clean up

Delete the Pod and the Secrets:

kubectl delete pod test-projected-volume
kubectl delete secret user pass

What's next

Learn more about projected volumes.
Read the all-in-one volume design document.

12 - Configure a Security Context for a Pod or Container

A security context defines privilege and access control settings for a Pod or Container. Security context settings include, but are not limited to:

Discretionary Access Control: Permission to access an object, like a file, is based on user ID (UID) and group ID (GID).
Security Enhanced Linux (SELinux): Objects are assigned security labels.
Running as privileged or unprivileged.
Linux Capabilities: Give a process some privileges, but not all the privileges of the root user.
AppArmor: Use program profiles to restrict the capabilities of individual programs.
Seccomp: Filter a process's system calls.
allowPrivilegeEscalation: Controls whether a process can gain more privileges than its parent process. This bool directly controls whether the no_new_privs flag gets set on the container process. allowPrivilegeEscalation is always true when the container:
- is run as privileged, or
- has CAP_SYS_ADMIN
readOnlyRootFilesystem: Mounts the container's root filesystem as read-only.

The above bullets are not a complete set of security context settings -- please see SecurityContext for a comprehensive list.

Before you begin

To check the version, enter kubectl version.

Set the security context for a Pod

To specify security settings for a Pod, include the securityContext field in the Pod specification. The securityContext field is a PodSecurityContext object. The security settings that you specify for a Pod apply to all Containers in the Pod. Here is a configuration file for a Pod that has a securityContext and an emptyDir volume:

pods/security/security-context.yaml

apiVersion: v1
kind: Pod
metadata:
  name: security-context-demo
spec:
  securityContext:
    runAsUser: 1000
    runAsGroup: 3000
    fsGroup: 2000
  volumes:
  - name: sec-ctx-vol
    emptyDir: {}
  containers:
  - name: sec-ctx-demo
    image: busybox:1.28
    command: [ "sh", "-c", "sleep 1h" ]
    volumeMounts:
    - name: sec-ctx-vol
      mountPath: /data/demo
    securityContext:
      allowPrivilegeEscalation: false

In the configuration file, the runAsUser field specifies that for any Containers in the Pod, all processes run with user ID 1000. The runAsGroup field specifies the primary group ID of 3000 for all processes within any containers of the Pod. If this field is omitted, the primary group ID of the containers will be root(0). Any files created will also be owned by user 1000 and group 3000 when runAsGroup is specified. Since fsGroup field is specified, all processes of the container are also part of the supplementary group ID 2000. The owner for volume /data/demo and any files created in that volume will be Group ID 2000.

Create the Pod:

kubectl apply -f https://k8s.io/examples/pods/security/security-context.yaml

Verify that the Pod's Container is running:

kubectl get pod security-context-demo

Get a shell to the running Container:

kubectl exec -it security-context-demo -- sh

In your shell, list the running processes:

ps

The output shows that the processes are running as user 1000, which is the value of runAsUser:

PID   USER     TIME  COMMAND
    1 1000      0:00 sleep 1h
    6 1000      0:00 sh
...

In your shell, navigate to /data, and list the one directory:

cd /data
ls -l

The output shows that the /data/demo directory has group ID 2000, which is the value of fsGroup.

drwxrwsrwx 2 root 2000 4096 Jun  6 20:08 demo

In your shell, navigate to /data/demo, and create a file:

cd demo
echo hello > testfile

List the file in the /data/demo directory:

ls -l

The output shows that testfile has group ID 2000, which is the value of fsGroup.

-rw-r--r-- 1 1000 2000 6 Jun  6 20:08 testfile

Run the following command:

id

The output is similar to this:

uid=1000 gid=3000 groups=2000

From the output, you can see that gid is 3000 which is same as the runAsGroup field. If the runAsGroup was omitted, the gid would remain as 0 (root) and the process will be able to interact with files that are owned by the root(0) group and groups that have the required group permissions for the root (0) group.

Exit your shell:

exit

Configure volume permission and ownership change policy for Pods

FEATURE STATE: Kubernetes v1.23 [stable]

By default, Kubernetes recursively changes ownership and permissions for the contents of each volume to match the fsGroup specified in a Pod's securityContext when that volume is mounted. For large volumes, checking and changing ownership and permissions can take a lot of time, slowing Pod startup. You can use the fsGroupChangePolicy field inside a securityContext to control the way that Kubernetes checks and manages ownership and permissions for a volume.

fsGroupChangePolicy - fsGroupChangePolicy defines behavior for changing ownership and permission of the volume before being exposed inside a Pod. This field only applies to volume types that support fsGroup controlled ownership and permissions. This field has two possible values:

OnRootMismatch: Only change permissions and ownership if the permission and the ownership of root directory does not match with expected permissions of the volume. This could help shorten the time it takes to change ownership and permission of a volume.
Always: Always change permission and ownership of the volume when volume is mounted.

For example:

securityContext:
  runAsUser: 1000
  runAsGroup: 3000
  fsGroup: 2000
  fsGroupChangePolicy: "OnRootMismatch"

Note: This field has no effect on ephemeral volume types such as secret, configMap, and emptydir.

Delegating volume permission and ownership change to CSI driver

FEATURE STATE: Kubernetes v1.26 [stable]

If you deploy a Container Storage Interface (CSI) driver which supports the VOLUME_MOUNT_GROUP NodeServiceCapability, the process of setting file ownership and permissions based on the fsGroup specified in the securityContext will be performed by the CSI driver instead of Kubernetes. In this case, since Kubernetes doesn't perform any ownership and permission change, fsGroupChangePolicy does not take effect, and as specified by CSI, the driver is expected to mount the volume with the provided fsGroup, resulting in a volume that is readable/writable by the fsGroup.

Set the security context for a Container

To specify security settings for a Container, include the securityContext field in the Container manifest. The securityContext field is a SecurityContext object. Security settings that you specify for a Container apply only to the individual Container, and they override settings made at the Pod level when there is overlap. Container settings do not affect the Pod's Volumes.

Here is the configuration file for a Pod that has one Container. Both the Pod and the Container have a securityContext field:

pods/security/security-context-2.yaml

apiVersion: v1
kind: Pod
metadata:
  name: security-context-demo-2
spec:
  securityContext:
    runAsUser: 1000
  containers:
  - name: sec-ctx-demo-2
    image: gcr.io/google-samples/node-hello:1.0
    securityContext:
      runAsUser: 2000
      allowPrivilegeEscalation: false

Create the Pod:

kubectl apply -f https://k8s.io/examples/pods/security/security-context-2.yaml

Verify that the Pod's Container is running:

kubectl get pod security-context-demo-2

Get a shell into the running Container:

kubectl exec -it security-context-demo-2 -- sh

In your shell, list the running processes:

ps aux

The output shows that the processes are running as user 2000. This is the value of runAsUser specified for the Container. It overrides the value 1000 that is specified for the Pod.

USER       PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
2000         1  0.0  0.0   4336   764 ?        Ss   20:36   0:00 /bin/sh -c node server.js
2000         8  0.1  0.5 772124 22604 ?        Sl   20:36   0:00 node server.js
...

Exit your shell:

exit

Set capabilities for a Container

With Linux capabilities, you can grant certain privileges to a process without granting all the privileges of the root user. To add or remove Linux capabilities for a Container, include the capabilities field in the securityContext section of the Container manifest.

First, see what happens when you don't include a capabilities field. Here is configuration file that does not add or remove any Container capabilities:

pods/security/security-context-3.yaml

apiVersion: v1
kind: Pod
metadata:
  name: security-context-demo-3
spec:
  containers:
  - name: sec-ctx-3
    image: gcr.io/google-samples/node-hello:1.0

Create the Pod:

kubectl apply -f https://k8s.io/examples/pods/security/security-context-3.yaml

Verify that the Pod's Container is running:

kubectl get pod security-context-demo-3

Get a shell into the running Container:

kubectl exec -it security-context-demo-3 -- sh

In your shell, list the running processes:

ps aux

The output shows the process IDs (PIDs) for the Container:

USER  PID %CPU %MEM    VSZ   RSS TTY   STAT START   TIME COMMAND
root    1  0.0  0.0   4336   796 ?     Ss   18:17   0:00 /bin/sh -c node server.js
root    5  0.1  0.5 772124 22700 ?     Sl   18:17   0:00 node server.js

In your shell, view the status for process 1:

cd /proc/1
cat status

The output shows the capabilities bitmap for the process:

...
CapPrm:	00000000a80425fb
CapEff:	00000000a80425fb
...

Make a note of the capabilities bitmap, and then exit your shell:

exit

Next, run a Container that is the same as the preceding container, except that it has additional capabilities set.

Here is the configuration file for a Pod that runs one Container. The configuration adds the CAP_NET_ADMIN and CAP_SYS_TIME capabilities:

pods/security/security-context-4.yaml

apiVersion: v1
kind: Pod
metadata:
  name: security-context-demo-4
spec:
  containers:
  - name: sec-ctx-4
    image: gcr.io/google-samples/node-hello:1.0
    securityContext:
      capabilities:
        add: ["NET_ADMIN", "SYS_TIME"]

Create the Pod:

kubectl apply -f https://k8s.io/examples/pods/security/security-context-4.yaml

Get a shell into the running Container:

kubectl exec -it security-context-demo-4 -- sh

In your shell, view the capabilities for process 1:

cd /proc/1
cat status

The output shows capabilities bitmap for the process:

...
CapPrm:	00000000aa0435fb
CapEff:	00000000aa0435fb
...

Compare the capabilities of the two Containers:

00000000a80425fb
00000000aa0435fb

In the capability bitmap of the first container, bits 12 and 25 are clear. In the second container, bits 12 and 25 are set. Bit 12 is CAP_NET_ADMIN, and bit 25 is CAP_SYS_TIME. See capability.h for definitions of the capability constants.

Note: Linux capability constants have the form CAP_XXX. But when you list capabilities in your container manifest, you must omit the CAP_ portion of the constant. For example, to add CAP_SYS_TIME, include SYS_TIME in your list of capabilities.

Set the Seccomp Profile for a Container

To set the Seccomp profile for a Container, include the seccompProfile field in the securityContext section of your Pod or Container manifest. The seccompProfile field is a SeccompProfile object consisting of type and localhostProfile. Valid options for type include RuntimeDefault, Unconfined, and Localhost. localhostProfile must only be set if type: Localhost. It indicates the path of the pre-configured profile on the node, relative to the kubelet's configured Seccomp profile location (configured with the --root-dir flag).

Here is an example that sets the Seccomp profile to the node's container runtime default profile:

...
securityContext:
  seccompProfile:
    type: RuntimeDefault

Here is an example that sets the Seccomp profile to a pre-configured file at <kubelet-root-dir>/seccomp/my-profiles/profile-allow.json:

...
securityContext:
  seccompProfile:
    type: Localhost
    localhostProfile: my-profiles/profile-allow.json

Assign SELinux labels to a Container

To assign SELinux labels to a Container, include the seLinuxOptions field in the securityContext section of your Pod or Container manifest. The seLinuxOptions field is an SELinuxOptions object. Here's an example that applies an SELinux level:

...
securityContext:
  seLinuxOptions:
    level: "s0:c123,c456"

Note: To assign SELinux labels, the SELinux security module must be loaded on the host operating system.

Efficient SELinux volume relabeling

FEATURE STATE: Kubernetes v1.27 [beta]

By default, the container runtime recursively assigns SELinux label to all files on all Pod volumes. To speed up this process, Kubernetes can change the SELinux label of a volume instantly by using a mount option -o context=<label>.

To benefit from this speedup, all these conditions must be met:

The feature gates ReadWriteOncePod and SELinuxMountReadWriteOncePod must be enabled.
Pod must use PersistentVolumeClaim with accessModes: ["ReadWriteOncePod"].
Pod (or all its Containers that use the PersistentVolumeClaim) must have seLinuxOptions set.
The corresponding PersistentVolume must be either:
- A volume that uses the legacy in-tree iscsi, rbd or fc volume type.
- Or a volume that uses a CSI driver. The CSI driver must announce that it supports mounting with -o context by setting spec.seLinuxMount: true in its CSIDriver instance.

For any other volume types, SELinux relabelling happens another way: the container runtime recursively changes the SELinux label for all inodes (files and directories) in the volume. The more files and directories in the volume, the longer that relabelling takes.

Note:

If you are running Kubernetes v1.25, refer to the v1.25 version of this task page: Configure a Security Context for a Pod or Container (v1.25).
There is an important note in that documentation about a situation where the kubelet can lose track of volume labels after restart. This deficiency has been fixed in Kubernetes 1.26.

Discussion

The security context for a Pod applies to the Pod's Containers and also to the Pod's Volumes when applicable. Specifically fsGroup and seLinuxOptions are applied to Volumes as follows:

fsGroup: Volumes that support ownership management are modified to be owned and writable by the GID specified in fsGroup. See the Ownership Management design document for more details.
seLinuxOptions: Volumes that support SELinux labeling are relabeled to be accessible by the label specified under seLinuxOptions. Usually you only need to set the level section. This sets the Multi-Category Security (MCS) label given to all Containers in the Pod as well as the Volumes.

Warning: After you specify an MCS label for a Pod, all Pods with the same label can access the Volume. If you need inter-Pod protection, you must assign a unique MCS label to each Pod.

Clean up

Delete the Pod:

kubectl delete pod security-context-demo
kubectl delete pod security-context-demo-2
kubectl delete pod security-context-demo-3
kubectl delete pod security-context-demo-4

What's next

PodSecurityContext
SecurityContext
CRI Plugin Config Guide
Security Contexts design document
Ownership Management design document
PodSecurity Admission
AllowPrivilegeEscalation design document
For more information about security mechanisms in Linux, see Overview of Linux Kernel Security Features (Note: Some information is out of date)

13 - Configure Service Accounts for Pods

Kubernetes offers two distinct ways for clients that run within your cluster, or that otherwise have a relationship to your cluster's control plane to authenticate to the API server.

A service account provides an identity for processes that run in a Pod, and maps to a ServiceAccount object. When you authenticate to the API server, you identify yourself as a particular user. Kubernetes recognises the concept of a user, however, Kubernetes itself does not have a User API.

This task guide is about ServiceAccounts, which do exist in the Kubernetes API. The guide shows you some ways to configure ServiceAccounts for Pods.

Before you begin

Use the default service account to access the API server

When Pods contact the API server, Pods authenticate as a particular ServiceAccount (for example, default). There is always at least one ServiceAccount in each namespace.

Every Kubernetes namespace contains at least one ServiceAccount: the default ServiceAccount for that namespace, named default. If you do not specify a ServiceAccount when you create a Pod, Kubernetes automatically assigns the ServiceAccount named default in that namespace.

You can fetch the details for a Pod you have created. For example:

kubectl get pods/<podname> -o yaml

In the output, you see a field spec.serviceAccountName. Kubernetes automatically sets that value if you don't specify it when you create a Pod.

An application running inside a Pod can access the Kubernetes API using automatically mounted service account credentials. See accessing the Cluster to learn more.

When a Pod authenticates as a ServiceAccount, its level of access depends on the authorization plugin and policy in use.

Opt out of API credential automounting

If you don't want the kubelet to automatically mount a ServiceAccount's API credentials, you can opt out of the default behavior. You can opt out of automounting API credentials on /var/run/secrets/kubernetes.io/serviceaccount/token for a service account by setting automountServiceAccountToken: false on the ServiceAccount:

For example:

apiVersion: v1
kind: ServiceAccount
metadata:
  name: build-robot
automountServiceAccountToken: false
...

You can also opt out of automounting API credentials for a particular Pod:

apiVersion: v1
kind: Pod
metadata:
  name: my-pod
spec:
  serviceAccountName: build-robot
  automountServiceAccountToken: false
  ...

If both the ServiceAccount and the Pod's .spec specify a value for automountServiceAccountToken, the Pod spec takes precedence.

Use more than one ServiceAccount

Every namespace has at least one ServiceAccount: the default ServiceAccount resource, called default. You can list all ServiceAccount resources in your current namespace with:

kubectl get serviceaccounts

The output is similar to this:

NAME      SECRETS    AGE
default   1          1d

You can create additional ServiceAccount objects like this:

kubectl apply -f - <<EOF
apiVersion: v1
kind: ServiceAccount
metadata:
  name: build-robot
EOF

The name of a ServiceAccount object must be a valid DNS subdomain name.

If you get a complete dump of the service account object, like this:

kubectl get serviceaccounts/build-robot -o yaml

The output is similar to this:

apiVersion: v1
kind: ServiceAccount
metadata:
  creationTimestamp: 2019-06-16T00:12:34Z
  name: build-robot
  namespace: default
  resourceVersion: "272500"
  uid: 721ab723-13bc-11e5-aec2-42010af0021e

You can use authorization plugins to set permissions on service accounts.

To use a non-default service account, set the spec.serviceAccountName field of a Pod to the name of the ServiceAccount you wish to use.

You can only set the serviceAccountName field when creating a Pod, or in a template for a new Pod. You cannot update the .spec.serviceAccountName field of a Pod that already exists.

Note: The .spec.serviceAccount field is a deprecated alias for .spec.serviceAccountName. If you want to remove the fields from a workload resource, set both fields to empty explicitly on the pod template.

Cleanup

If you tried creating build-robot ServiceAccount from the example above, you can clean it up by running:

kubectl delete serviceaccount/build-robot

Manually create an API token for a ServiceAccount

Suppose you have an existing service account named "build-robot" as mentioned earlier.

You can get a time-limited API token for that ServiceAccount using kubectl:

kubectl create token build-robot

The output from that command is a token that you can use to authenticate as that ServiceAccount. You can request a specific token duration using the --duration command line argument to kubectl create token (the actual duration of the issued token might be shorter, or could even be longer).

Note:

Versions of Kubernetes before v1.22 automatically created long term credentials for accessing the Kubernetes API. This older mechanism was based on creating token Secrets that could then be mounted into running Pods. In more recent versions, including Kubernetes v1.28, API credentials are obtained directly by using the TokenRequest API, and are mounted into Pods using a projected volume. The tokens obtained using this method have bounded lifetimes, and are automatically invalidated when the Pod they are mounted into is deleted.

You can still manually create a service account token Secret; for example, if you need a token that never expires. However, using the TokenRequest subresource to obtain a token to access the API is recommended instead.

Manually create a long-lived API token for a ServiceAccount

If you want to obtain an API token for a ServiceAccount, you create a new Secret with a special annotation, kubernetes.io/service-account.name.

kubectl apply -f - <<EOF
apiVersion: v1
kind: Secret
metadata:
  name: build-robot-secret
  annotations:
    kubernetes.io/service-account.name: build-robot
type: kubernetes.io/service-account-token
EOF

If you view the Secret using:

kubectl get secret/build-robot-secret -o yaml

you can see that the Secret now contains an API token for the "build-robot" ServiceAccount.

Because of the annotation you set, the control plane automatically generates a token for that ServiceAccounts, and stores them into the associated Secret. The control plane also cleans up tokens for deleted ServiceAccounts.

kubectl describe secrets/build-robot-secret

The output is similar to this:

Name:           build-robot-secret
Namespace:      default
Labels:         <none>
Annotations:    kubernetes.io/service-account.name: build-robot
                kubernetes.io/service-account.uid: da68f9c6-9d26-11e7-b84e-002dc52800da

Type:   kubernetes.io/service-account-token

Data
====
ca.crt:         1338 bytes
namespace:      7 bytes
token:          ...

Note:

The content of token is elided here.

Take care not to display the contents of a kubernetes.io/service-account-token Secret somewhere that your terminal / computer screen could be seen by an onlooker.

When you delete a ServiceAccount that has an associated Secret, the Kubernetes control plane automatically cleans up the long-lived token from that Secret.

Note:

If you view the ServiceAccount using:

kubectl get serviceaccount build-robot -o yaml

You can't see the build-robot-secret Secret in the ServiceAccount API objects .secrets field because that field is only populated with auto-generated Secrets.

Add ImagePullSecrets to a service account

First, create an imagePullSecret. Next, verify it has been created. For example:

Create an imagePullSecret, as described in Specifying ImagePullSecrets on a Pod.

kubectl create secret docker-registry myregistrykey --docker-server=DUMMY_SERVER \
        --docker-username=DUMMY_USERNAME --docker-password=DUMMY_DOCKER_PASSWORD \
        --docker-email=DUMMY_DOCKER_EMAIL

Verify it has been created.

kubectl get secrets myregistrykey

The output is similar to this:

NAME             TYPE                              DATA    AGE
myregistrykey    kubernetes.io/.dockerconfigjson   1       1d

Add image pull secret to service account

Next, modify the default service account for the namespace to use this Secret as an imagePullSecret.

kubectl patch serviceaccount default -p '{"imagePullSecrets": [{"name": "myregistrykey"}]}'

You can achieve the same outcome by editing the object manually:

kubectl edit serviceaccount/default

The output of the sa.yaml file is similar to this:

Your selected text editor will open with a configuration looking something like this:

apiVersion: v1
kind: ServiceAccount
metadata:
  creationTimestamp: 2021-07-07T22:02:39Z
  name: default
  namespace: default
  resourceVersion: "243024"
  uid: 052fb0f4-3d50-11e5-b066-42010af0d7b6

Using your editor, delete the line with key resourceVersion, add lines for imagePullSecrets: and save it. Leave the uid value set the same as you found it.

After you made those changes, the edited ServiceAccount looks something like this:

apiVersion: v1
kind: ServiceAccount
metadata:
  creationTimestamp: 2021-07-07T22:02:39Z
  name: default
  namespace: default
  uid: 052fb0f4-3d50-11e5-b066-42010af0d7b6
imagePullSecrets:
  - name: myregistrykey

Verify that imagePullSecrets are set for new Pods

Now, when a new Pod is created in the current namespace and using the default ServiceAccount, the new Pod has its spec.imagePullSecrets field set automatically:

kubectl run nginx --image=nginx --restart=Never
kubectl get pod nginx -o=jsonpath='{.spec.imagePullSecrets[0].name}{"\n"}'

The output is:

myregistrykey

ServiceAccount token volume projection

FEATURE STATE: Kubernetes v1.20 [stable]

Note:

To enable and use token request projection, you must specify each of the following command line arguments to kube-apiserver:

--service-account-issuer: defines the Identifier of the service account token issuer. You can specify the --service-account-issuer argument multiple times, this can be useful to enable a non-disruptive change of the issuer. When this flag is specified multiple times, the first is used to generate tokens and all are used to determine which issuers are accepted. You must be running Kubernetes v1.22 or later to be able to specify --service-account-issuer multiple times.
--service-account-key-file: specifies the path to a file containing PEM-encoded X.509 private or public keys (RSA or ECDSA), used to verify ServiceAccount tokens. The specified file can contain multiple keys, and the flag can be specified multiple times with different files. If specified multiple times, tokens signed by any of the specified keys are considered valid by the Kubernetes API server.
--service-account-signing-key-file: specifies the path to a file that contains the current private key of the service account token issuer. The issuer signs issued ID tokens with this private key.
--api-audiences (can be omitted): defines audiences for ServiceAccount tokens. The service account token authenticator validates that tokens used against the API are bound to at least one of these audiences. If api-audiences is specified multiple times, tokens for any of the specified audiences are considered valid by the Kubernetes API server. If you specify the --service-account-issuer command line argument but you don't set --api-audiences, the control plane defaults to a single element audience list that contains only the issuer URL.

The kubelet can also project a ServiceAccount token into a Pod. You can specify desired properties of the token, such as the audience and the validity duration. These properties are not configurable on the default ServiceAccount token. The token will also become invalid against the API when either the Pod or the ServiceAccount is deleted.

You can configure this behavior for the spec of a Pod using a projected volume type called ServiceAccountToken.

Launch a Pod using service account token projection

To provide a Pod with a token with an audience of vault and a validity duration of two hours, you could define a Pod manifest that is similar to:

pods/pod-projected-svc-token.yaml

apiVersion: v1
kind: Pod
metadata:
  name: nginx
spec:
  containers:
  - image: nginx
    name: nginx
    volumeMounts:
    - mountPath: /var/run/secrets/tokens
      name: vault-token
  serviceAccountName: build-robot
  volumes:
  - name: vault-token
    projected:
      sources:
      - serviceAccountToken:
          path: vault-token
          expirationSeconds: 7200
          audience: vault

Create the Pod:

kubectl create -f https://k8s.io/examples/pods/pod-projected-svc-token.yaml

The kubelet will: request and store the token on behalf of the Pod; make the token available to the Pod at a configurable file path; and refresh the token as it approaches expiration. The kubelet proactively requests rotation for the token if it is older than 80% of its total time-to-live (TTL), or if the token is older than 24 hours.

The application is responsible for reloading the token when it rotates. It's often good enough for the application to load the token on a schedule (for example: once every 5 minutes), without tracking the actual expiry time.

Service account issuer discovery

FEATURE STATE: Kubernetes v1.21 [stable]

If you have enabled token projection for ServiceAccounts in your cluster, then you can also make use of the discovery feature. Kubernetes provides a way for clients to federate as an identity provider, so that one or more external systems can act as a relying party.

Note:

The issuer URL must comply with the OIDC Discovery Spec. In practice, this means it must use the https scheme, and should serve an OpenID provider configuration at {service-account-issuer}/.well-known/openid-configuration.

If the URL does not comply, ServiceAccount issuer discovery endpoints are not registered or accessible.

When enabled, the Kubernetes API server publishes an OpenID Provider Configuration document via HTTP. The configuration document is published at /.well-known/openid-configuration. The OpenID Provider Configuration is sometimes referred to as the discovery document. The Kubernetes API server publishes the related JSON Web Key Set (JWKS), also via HTTP, at /openid/v1/jwks.

Note: The responses served at /.well-known/openid-configuration and /openid/v1/jwks are designed to be OIDC compatible, but not strictly OIDC compliant. Those documents contain only the parameters necessary to perform validation of Kubernetes service account tokens.

Clusters that use RBAC include a default ClusterRole called system:service-account-issuer-discovery. A default ClusterRoleBinding assigns this role to the system:serviceaccounts group, which all ServiceAccounts implicitly belong to. This allows pods running on the cluster to access the service account discovery document via their mounted service account token. Administrators may, additionally, choose to bind the role to system:authenticated or system:unauthenticated depending on their security requirements and which external systems they intend to federate with.

The JWKS response contains public keys that a relying party can use to validate the Kubernetes service account tokens. Relying parties first query for the OpenID Provider Configuration, and use the jwks_uri field in the response to find the JWKS.

In many cases, Kubernetes API servers are not available on the public internet, but public endpoints that serve cached responses from the API server can be made available by users or by service providers. In these cases, it is possible to override the jwks_uri in the OpenID Provider Configuration so that it points to the public endpoint, rather than the API server's address, by passing the --service-account-jwks-uri flag to the API server. Like the issuer URL, the JWKS URI is required to use the https scheme.

What's next

14 - Pull an Image from a Private Registry

This page shows how to create a Pod that uses a Secret to pull an image from a private container image registry or repository. There are many private registries in use. This task uses Docker Hub as an example registry.

🛇 This item links to a third party project or product that is not part of Kubernetes itself. More information

Before you begin

You need to have a Kubernetes cluster, and the kubectl command-line tool must be configured to communicate with your cluster. It is recommended to run this tutorial on a cluster with at least two nodes that are not acting as control plane hosts. If you do not already have a cluster, you can create one by using minikube or you can use one of these Kubernetes playgrounds:
- Killercoda
- Play with Kubernetes
To do this exercise, you need the docker command line tool, and a Docker ID for which you know the password.
If you are using a different private container registry, you need the command line tool for that registry and any login information for the registry.

Log in to Docker Hub

On your laptop, you must authenticate with a registry in order to pull a private image.

Use the docker tool to log in to Docker Hub. See the log in section of Docker ID accounts for more information.

docker login

When prompted, enter your Docker ID, and then the credential you want to use (access token, or the password for your Docker ID).

The login process creates or updates a config.json file that holds an authorization token. Review how Kubernetes interprets this file.

View the config.json file:

cat ~/.docker/config.json

The output contains a section similar to this:

{
    "auths": {
        "https://index.docker.io/v1/": {
            "auth": "c3R...zE2"
        }
    }
}

Note: If you use a Docker credentials store, you won't see that auth entry but a credsStore entry with the name of the store as value. In that case, you can create a secret directly. See Create a Secret by providing credentials on the command line.

Create a Secret based on existing credentials

A Kubernetes cluster uses the Secret of kubernetes.io/dockerconfigjson type to authenticate with a container registry to pull a private image.

If you already ran docker login, you can copy that credential into Kubernetes:

kubectl create secret generic regcred \
    --from-file=.dockerconfigjson=<path/to/.docker/config.json> \
    --type=kubernetes.io/dockerconfigjson

If you need more control (for example, to set a namespace or a label on the new secret) then you can customise the Secret before storing it. Be sure to:

set the name of the data item to .dockerconfigjson
base64 encode the Docker configuration file and then paste that string, unbroken as the value for field data[".dockerconfigjson"]
set type to kubernetes.io/dockerconfigjson

Example:

apiVersion: v1
kind: Secret
metadata:
  name: myregistrykey
  namespace: awesomeapps
data:
  .dockerconfigjson: UmVhbGx5IHJlYWxseSByZWVlZWVlZWVlZWFhYWFhYWFhYWFhYWFhYWFhYWFhYWFhYWFhYWxsbGxsbGxsbGxsbGxsbGxsbGxsbGxsbGxsbGxsbGx5eXl5eXl5eXl5eXl5eXl5eXl5eSBsbGxsbGxsbGxsbGxsbG9vb29vb29vb29vb29vb29vb29vb29vb29vb25ubm5ubm5ubm5ubm5ubm5ubm5ubm5ubmdnZ2dnZ2dnZ2dnZ2dnZ2dnZ2cgYXV0aCBrZXlzCg==
type: kubernetes.io/dockerconfigjson

If you get the error message error: no objects passed to create, it may mean the base64 encoded string is invalid. If you get an error message like Secret "myregistrykey" is invalid: data[.dockerconfigjson]: invalid value ..., it means the base64 encoded string in the data was successfully decoded, but could not be parsed as a .docker/config.json file.

Create a Secret by providing credentials on the command line

Create this Secret, naming it regcred:

kubectl create secret docker-registry regcred --docker-server=<your-registry-server> --docker-username=<your-name> --docker-password=<your-pword> --docker-email=<your-email>

where:

<your-registry-server> is your Private Docker Registry FQDN. Use https://index.docker.io/v1/ for DockerHub.
<your-name> is your Docker username.
<your-pword> is your Docker password.
<your-email> is your Docker email.

You have successfully set your Docker credentials in the cluster as a Secret called regcred.

Note: Typing secrets on the command line may store them in your shell history unprotected, and those secrets might also be visible to other users on your PC during the time that kubectl is running.

Inspecting the Secret `regcred`

To understand the contents of the regcred Secret you created, start by viewing the Secret in YAML format:

kubectl get secret regcred --output=yaml

The output is similar to this:

apiVersion: v1
kind: Secret
metadata:
  ...
  name: regcred
  ...
data:
  .dockerconfigjson: eyJodHRwczovL2luZGV4L ... J0QUl6RTIifX0=
type: kubernetes.io/dockerconfigjson

The value of the .dockerconfigjson field is a base64 representation of your Docker credentials.

To understand what is in the .dockerconfigjson field, convert the secret data to a readable format:

kubectl get secret regcred --output="jsonpath={.data.\.dockerconfigjson}" | base64 --decode

The output is similar to this:

{"auths":{"your.private.registry.example.com":{"username":"janedoe","password":"xxxxxxxxxxx","email":"jdoe@example.com","auth":"c3R...zE2"}}}

To understand what is in the auth field, convert the base64-encoded data to a readable format:

echo "c3R...zE2" | base64 --decode

The output, username and password concatenated with a :, is similar to this:

janedoe:xxxxxxxxxxx

Notice that the Secret data contains the authorization token similar to your local ~/.docker/config.json file.

You have successfully set your Docker credentials as a Secret called regcred in the cluster.

Create a Pod that uses your Secret

Here is a manifest for an example Pod that needs access to your Docker credentials in regcred:

pods/private-reg-pod.yaml

apiVersion: v1
kind: Pod
metadata:
  name: private-reg
spec:
  containers:
  - name: private-reg-container
    image: <your-private-image>
  imagePullSecrets:
  - name: regcred

Download the above file onto your computer:

curl -L -o my-private-reg-pod.yaml https://k8s.io/examples/pods/private-reg-pod.yaml

In file my-private-reg-pod.yaml, replace <your-private-image> with the path to an image in a private registry such as:

your.private.registry.example.com/janedoe/jdoe-private:v1

To pull the image from the private registry, Kubernetes needs credentials. The imagePullSecrets field in the configuration file specifies that Kubernetes should get the credentials from a Secret named regcred.

Create a Pod that uses your Secret, and verify that the Pod is running:

kubectl apply -f my-private-reg-pod.yaml
kubectl get pod private-reg

Note: To use image pull secrets for a Pod (or a Deployment, or other object that has a pod template that you are using), you need to make sure that the appropriate Secret does exist in the right namespace. The namespace to use is the same namespace where you defined the Pod.

Also, in case the Pod fails to start with the status ImagePullBackOff, view the Pod events:

kubectl describe pod private-reg

If you then see an event with the reason set to FailedToRetrieveImagePullSecret, Kubernetes can't find a Secret with name (regcred, in this example). If you specify that a Pod needs image pull credentials, the kubelet checks that it can access that Secret before attempting to pull the image.

Make sure that the Secret you have specified exists, and that its name is spelled properly.

Events:
  ...  Reason                           ...  Message
       ------                                -------
  ...  FailedToRetrieveImagePullSecret  ...  Unable to retrieve some image pull secrets (<regcred>); attempting to pull the image may not succeed.

What's next

Learn more about Secrets
- or read the API reference for Secret
Learn more about using a private registry.
Learn more about adding image pull secrets to a service account.
See kubectl create secret docker-registry.
See the imagePullSecrets field within the container definitions of a Pod

15 - Configure Liveness, Readiness and Startup Probes

This page shows how to configure liveness, readiness and startup probes for containers.

The kubelet uses liveness probes to know when to restart a container. For example, liveness probes could catch a deadlock, where an application is running, but unable to make progress. Restarting a container in such a state can help to make the application more available despite bugs.

A common pattern for liveness probes is to use the same low-cost HTTP endpoint as for readiness probes, but with a higher failureThreshold. This ensures that the pod is observed as not-ready for some period of time before it is hard killed.

The kubelet uses readiness probes to know when a container is ready to start accepting traffic. A Pod is considered ready when all of its containers are ready. One use of this signal is to control which Pods are used as backends for Services. When a Pod is not ready, it is removed from Service load balancers.

The kubelet uses startup probes to know when a container application has started. If such a probe is configured, liveness and readiness probes do not start until it succeeds, making sure those probes don't interfere with the application startup. This can be used to adopt liveness checks on slow starting containers, avoiding them getting killed by the kubelet before they are up and running.

Caution: Liveness probes can be a powerful way to recover from application failures, but they should be used with caution. Liveness probes must be configured carefully to ensure that they truly indicate unrecoverable application failure, for example a deadlock.

Note: Incorrect implementation of liveness probes can lead to cascading failures. This results in restarting of container under high load; failed client requests as your application became less scalable; and increased workload on remaining pods due to some failed pods. Understand the difference between readiness and liveness probes and when to apply them for your app.

Before you begin

Define a liveness command

Many applications running for long periods of time eventually transition to broken states, and cannot recover except by being restarted. Kubernetes provides liveness probes to detect and remedy such situations.

In this exercise, you create a Pod that runs a container based on the registry.k8s.io/busybox image. Here is the configuration file for the Pod:

pods/probe/exec-liveness.yaml

apiVersion: v1
kind: Pod
metadata:
  labels:
    test: liveness
  name: liveness-exec
spec:
  containers:
  - name: liveness
    image: registry.k8s.io/busybox
    args:
    - /bin/sh
    - -c
    - touch /tmp/healthy; sleep 30; rm -f /tmp/healthy; sleep 600
    livenessProbe:
      exec:
        command:
        - cat
        - /tmp/healthy
      initialDelaySeconds: 5
      periodSeconds: 5

In the configuration file, you can see that the Pod has a single Container. The periodSeconds field specifies that the kubelet should perform a liveness probe every 5 seconds. The initialDelaySeconds field tells the kubelet that it should wait 5 seconds before performing the first probe. To perform a probe, the kubelet executes the command cat /tmp/healthy in the target container. If the command succeeds, it returns 0, and the kubelet considers the container to be alive and healthy. If the command returns a non-zero value, the kubelet kills the container and restarts it.

When the container starts, it executes this command:

/bin/sh -c "touch /tmp/healthy; sleep 30; rm -f /tmp/healthy; sleep 600"

For the first 30 seconds of the container's life, there is a /tmp/healthy file. So during the first 30 seconds, the command cat /tmp/healthy returns a success code. After 30 seconds, cat /tmp/healthy returns a failure code.

Create the Pod:

kubectl apply -f https://k8s.io/examples/pods/probe/exec-liveness.yaml

Within 30 seconds, view the Pod events:

kubectl describe pod liveness-exec

The output indicates that no liveness probes have failed yet:

Type    Reason     Age   From               Message
----    ------     ----  ----               -------
Normal  Scheduled  11s   default-scheduler  Successfully assigned default/liveness-exec to node01
Normal  Pulling    9s    kubelet, node01    Pulling image "registry.k8s.io/busybox"
Normal  Pulled     7s    kubelet, node01    Successfully pulled image "registry.k8s.io/busybox"
Normal  Created    7s    kubelet, node01    Created container liveness
Normal  Started    7s    kubelet, node01    Started container liveness

After 35 seconds, view the Pod events again:

kubectl describe pod liveness-exec

At the bottom of the output, there are messages indicating that the liveness probes have failed, and the failed containers have been killed and recreated.

Type     Reason     Age                From               Message
----     ------     ----               ----               -------
Normal   Scheduled  57s                default-scheduler  Successfully assigned default/liveness-exec to node01
Normal   Pulling    55s                kubelet, node01    Pulling image "registry.k8s.io/busybox"
Normal   Pulled     53s                kubelet, node01    Successfully pulled image "registry.k8s.io/busybox"
Normal   Created    53s                kubelet, node01    Created container liveness
Normal   Started    53s                kubelet, node01    Started container liveness
Warning  Unhealthy  10s (x3 over 20s)  kubelet, node01    Liveness probe failed: cat: can't open '/tmp/healthy': No such file or directory
Normal   Killing    10s                kubelet, node01    Container liveness failed liveness probe, will be restarted

Wait another 30 seconds, and verify that the container has been restarted:

kubectl get pod liveness-exec

The output shows that RESTARTS has been incremented. Note that the RESTARTS counter increments as soon as a failed container comes back to the running state:

NAME            READY     STATUS    RESTARTS   AGE
liveness-exec   1/1       Running   1          1m

Define a liveness HTTP request

Another kind of liveness probe uses an HTTP GET request. Here is the configuration file for a Pod that runs a container based on the registry.k8s.io/liveness image.

pods/probe/http-liveness.yaml

apiVersion: v1
kind: Pod
metadata:
  labels:
    test: liveness
  name: liveness-http
spec:
  containers:
  - name: liveness
    image: registry.k8s.io/liveness
    args:
    - /server
    livenessProbe:
      httpGet:
        path: /healthz
        port: 8080
        httpHeaders:
        - name: Custom-Header
          value: Awesome
      initialDelaySeconds: 3
      periodSeconds: 3

In the configuration file, you can see that the Pod has a single container. The periodSeconds field specifies that the kubelet should perform a liveness probe every 3 seconds. The initialDelaySeconds field tells the kubelet that it should wait 3 seconds before performing the first probe. To perform a probe, the kubelet sends an HTTP GET request to the server that is running in the container and listening on port 8080. If the handler for the server's /healthz path returns a success code, the kubelet considers the container to be alive and healthy. If the handler returns a failure code, the kubelet kills the container and restarts it.

Any code greater than or equal to 200 and less than 400 indicates success. Any other code indicates failure.

You can see the source code for the server in server.go.

For the first 10 seconds that the container is alive, the /healthz handler returns a status of 200. After that, the handler returns a status of 500.

http.HandleFunc("/healthz", func(w http.ResponseWriter, r *http.Request) {
    duration := time.Now().Sub(started)
    if duration.Seconds() > 10 {
        w.WriteHeader(500)
        w.Write([]byte(fmt.Sprintf("error: %v", duration.Seconds())))
    } else {
        w.WriteHeader(200)
        w.Write([]byte("ok"))
    }
})

The kubelet starts performing health checks 3 seconds after the container starts. So the first couple of health checks will succeed. But after 10 seconds, the health checks will fail, and the kubelet will kill and restart the container.

To try the HTTP liveness check, create a Pod:

kubectl apply -f https://k8s.io/examples/pods/probe/http-liveness.yaml

After 10 seconds, view Pod events to verify that liveness probes have failed and the container has been restarted:

kubectl describe pod liveness-http

In releases after v1.13, local HTTP proxy environment variable settings do not affect the HTTP liveness probe.

Define a TCP liveness probe

A third type of liveness probe uses a TCP socket. With this configuration, the kubelet will attempt to open a socket to your container on the specified port. If it can establish a connection, the container is considered healthy, if it can't it is considered a failure.

pods/probe/tcp-liveness-readiness.yaml

apiVersion: v1
kind: Pod
metadata:
  name: goproxy
  labels:
    app: goproxy
spec:
  containers:
  - name: goproxy
    image: registry.k8s.io/goproxy:0.1
    ports:
    - containerPort: 8080
    readinessProbe:
      tcpSocket:
        port: 8080
      initialDelaySeconds: 15
      periodSeconds: 10
    livenessProbe:
      tcpSocket:
        port: 8080
      initialDelaySeconds: 15
      periodSeconds: 10

As you can see, configuration for a TCP check is quite similar to an HTTP check. This example uses both readiness and liveness probes. The kubelet will send the first readiness probe 15 seconds after the container starts. This will attempt to connect to the goproxy container on port 8080. If the probe succeeds, the Pod will be marked as ready. The kubelet will continue to run this check every 10 seconds.

In addition to the readiness probe, this configuration includes a liveness probe. The kubelet will run the first liveness probe 15 seconds after the container starts. Similar to the readiness probe, this will attempt to connect to the goproxy container on port 8080. If the liveness probe fails, the container will be restarted.

To try the TCP liveness check, create a Pod:

kubectl apply -f https://k8s.io/examples/pods/probe/tcp-liveness-readiness.yaml

After 15 seconds, view Pod events to verify that liveness probes:

kubectl describe pod goproxy

Define a gRPC liveness probe

FEATURE STATE: Kubernetes v1.27 [stable]

If your application implements the gRPC Health Checking Protocol, this example shows how to configure Kubernetes to use it for application liveness checks. Similarly you can configure readiness and startup probes.

Here is an example manifest:

pods/probe/grpc-liveness.yaml

apiVersion: v1
kind: Pod
metadata:
  name: etcd-with-grpc
spec:
  containers:
  - name: etcd
    image: registry.k8s.io/etcd:3.5.1-0
    command: [ "/usr/local/bin/etcd", "--data-dir",  "/var/lib/etcd", "--listen-client-urls", "http://0.0.0.0:2379", "--advertise-client-urls", "http://127.0.0.1:2379", "--log-level", "debug"]
    ports:
    - containerPort: 2379
    livenessProbe:
      grpc:
        port: 2379
      initialDelaySeconds: 10

To use a gRPC probe, port must be configured. If you want to distinguish probes of different types and probes for different features you can use the service field. You can set service to the value liveness and make your gRPC Health Checking endpoint respond to this request differently than when you set service set to readiness. This lets you use the same endpoint for different kinds of container health check rather than listening on two different ports. If you want to specify your own custom service name and also specify a probe type, the Kubernetes project recommends that you use a name that concatenates those. For example: myservice-liveness (using - as a separator).

Note: Unlike HTTP or TCP probes, you cannot specify the health check port by name, and you cannot configure a custom hostname.

Configuration problems (for example: incorrect port or service, unimplemented health checking protocol) are considered a probe failure, similar to HTTP and TCP probes.

To try the gRPC liveness check, create a Pod using the command below. In the example below, the etcd pod is configured to use gRPC liveness probe.

kubectl apply -f https://k8s.io/examples/pods/probe/grpc-liveness.yaml

After 15 seconds, view Pod events to verify that the liveness check has not failed:

kubectl describe pod etcd-with-grpc

When using a gRPC probe, there are some technical details to be aware of:

The probes run against the pod IP address or its hostname. Be sure to configure your gRPC endpoint to listen on the Pod's IP address.
The probes do not support any authentication parameters (like -tls).
There are no error codes for built-in probes. All errors are considered as probe failures.
If ExecProbeTimeout feature gate is set to false, grpc-health-probe does not respect the timeoutSeconds setting (which defaults to 1s), while built-in probe would fail on timeout.

Use a named port

You can use a named port for HTTP and TCP probes. gRPC probes do not support named ports.

For example:

ports:
- name: liveness-port
  containerPort: 8080
  hostPort: 8080

livenessProbe:
  httpGet:
    path: /healthz
    port: liveness-port

Protect slow starting containers with startup probes

Sometimes, you have to deal with legacy applications that might require an additional startup time on their first initialization. In such cases, it can be tricky to set up liveness probe parameters without compromising the fast response to deadlocks that motivated such a probe. The trick is to set up a startup probe with the same command, HTTP or TCP check, with a failureThreshold * periodSeconds long enough to cover the worst case startup time.

So, the previous example would become:

ports:
- name: liveness-port
  containerPort: 8080
  hostPort: 8080

livenessProbe:
  httpGet:
    path: /healthz
    port: liveness-port
  failureThreshold: 1
  periodSeconds: 10

startupProbe:
  httpGet:
    path: /healthz
    port: liveness-port
  failureThreshold: 30
  periodSeconds: 10

Thanks to the startup probe, the application will have a maximum of 5 minutes (30 * 10 = 300s) to finish its startup. Once the startup probe has succeeded once, the liveness probe takes over to provide a fast response to container deadlocks. If the startup probe never succeeds, the container is killed after 300s and subject to the pod's restartPolicy.

Define readiness probes

Sometimes, applications are temporarily unable to serve traffic. For example, an application might need to load large data or configuration files during startup, or depend on external services after startup. In such cases, you don't want to kill the application, but you don't want to send it requests either. Kubernetes provides readiness probes to detect and mitigate these situations. A pod with containers reporting that they are not ready does not receive traffic through Kubernetes Services.

Note: Readiness probes runs on the container during its whole lifecycle.

Caution: The readiness and liveness probes do not depend on each other to succeed. If you want to wait before executing a readiness probe, you should use initialDelaySeconds or a startupProbe.

Readiness probes are configured similarly to liveness probes. The only difference is that you use the readinessProbe field instead of the livenessProbe field.

readinessProbe:
  exec:
    command:
    - cat
    - /tmp/healthy
  initialDelaySeconds: 5
  periodSeconds: 5

Configuration for HTTP and TCP readiness probes also remains identical to liveness probes.

Readiness and liveness probes can be used in parallel for the same container. Using both can ensure that traffic does not reach a container that is not ready for it, and that containers are restarted when they fail.

Configure Probes

Probes have a number of fields that you can use to more precisely control the behavior of startup, liveness and readiness checks:

initialDelaySeconds: Number of seconds after the container has started before startup, liveness or readiness probes are initiated. If a startup probe is defined, liveness and readiness probe delays do not begin until the startup probe has succeeded. If the value of periodSeconds is greater than initialDelaySeconds then the initialDelaySeconds would be ignored. Defaults to 0 seconds. Minimum value is 0.
periodSeconds: How often (in seconds) to perform the probe. Default to 10 seconds. The minimum value is 1.
timeoutSeconds: Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1.
successThreshold: Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup Probes. Minimum value is 1.
failureThreshold: After a probe fails failureThreshold times in a row, Kubernetes considers that the overall check has failed: the container is not ready/healthy/live. For the case of a startup or liveness probe, if at least failureThreshold probes have failed, Kubernetes treats the container as unhealthy and triggers a restart for that specific container. The kubelet honors the setting of terminationGracePeriodSeconds for that container. For a failed readiness probe, the kubelet continues running the container that failed checks, and also continues to run more probes; because the check failed, the kubelet sets the Ready condition on the Pod to false.
terminationGracePeriodSeconds: configure a grace period for the kubelet to wait between triggering a shut down of the failed container, and then forcing the container runtime to stop that container. The default is to inherit the Pod-level value for terminationGracePeriodSeconds (30 seconds if not specified), and the minimum value is 1. See probe-level terminationGracePeriodSeconds for more detail.

Caution: Incorrect implementation of readiness probes may result in an ever growing number of processes in the container, and resource starvation if this is left unchecked.

HTTP probes

HTTP probes have additional fields that can be set on httpGet:

host: Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.
scheme: Scheme to use for connecting to the host (HTTP or HTTPS). Defaults to "HTTP".
path: Path to access on the HTTP server. Defaults to "/".
httpHeaders: Custom headers to set in the request. HTTP allows repeated headers.
port: Name or number of the port to access on the container. Number must be in the range 1 to 65535.

For an HTTP probe, the kubelet sends an HTTP request to the specified port and path to perform the check. The kubelet sends the probe to the Pod's IP address, unless the address is overridden by the optional host field in httpGet. If scheme field is set to HTTPS, the kubelet sends an HTTPS request skipping the certificate verification. In most scenarios, you do not want to set the host field. Here's one scenario where you would set it. Suppose the container listens on 127.0.0.1 and the Pod's hostNetwork field is true. Then host, under httpGet, should be set to 127.0.0.1. If your pod relies on virtual hosts, which is probably the more common case, you should not use host, but rather set the Host header in httpHeaders.

For an HTTP probe, the kubelet sends two request headers in addition to the mandatory Host header:

User-Agent: The default value is kube-probe/1.28, where 1.28 is the version of the kubelet.
Accept: The default value is */*.

You can override the default headers by defining httpHeaders for the probe. For example:

livenessProbe:
  httpGet:
    httpHeaders:
      - name: Accept
        value: application/json

startupProbe:
  httpGet:
    httpHeaders:
      - name: User-Agent
        value: MyUserAgent

You can also remove these two headers by defining them with an empty value.

livenessProbe:
  httpGet:
    httpHeaders:
      - name: Accept
        value: ""

startupProbe:
  httpGet:
    httpHeaders:
      - name: User-Agent
        value: ""

TCP probes

For a TCP probe, the kubelet makes the probe connection at the node, not in the Pod, which means that you can not use a service name in the host parameter since the kubelet is unable to resolve it.

Probe-level `terminationGracePeriodSeconds`

FEATURE STATE: Kubernetes v1.28 [stable]

In 1.25 and above, users can specify a probe-level terminationGracePeriodSeconds as part of the probe specification. When both a pod- and probe-level terminationGracePeriodSeconds are set, the kubelet will use the probe-level value.

When setting the terminationGracePeriodSeconds, please note the following:

The kubelet always honors the probe-level terminationGracePeriodSeconds field if it is present on a Pod.
If you have existing Pods where the terminationGracePeriodSeconds field is set and you no longer wish to use per-probe termination grace periods, you must delete those existing Pods.

For example:

spec:
  terminationGracePeriodSeconds: 3600  # pod-level
  containers:
  - name: test
    image: ...

    ports:
    - name: liveness-port
      containerPort: 8080
      hostPort: 8080

    livenessProbe:
      httpGet:
        path: /healthz
        port: liveness-port
      failureThreshold: 1
      periodSeconds: 60
      # Override pod-level terminationGracePeriodSeconds #
      terminationGracePeriodSeconds: 60

Probe-level terminationGracePeriodSeconds cannot be set for readiness probes. It will be rejected by the API server.

What's next

Learn more about Container Probes.

You can also read the API references for:

Pod, and specifically:
- container(s)
- probe(s)

16 - Assign Pods to Nodes

This page shows how to assign a Kubernetes Pod to a particular node in a Kubernetes cluster.

Before you begin

To check the version, enter kubectl version.

Add a label to a node

List the nodes in your cluster, along with their labels:

kubectl get nodes --show-labels

The output is similar to this:

NAME      STATUS    ROLES    AGE     VERSION        LABELS
worker0   Ready     <none>   1d      v1.13.0        ...,kubernetes.io/hostname=worker0
worker1   Ready     <none>   1d      v1.13.0        ...,kubernetes.io/hostname=worker1
worker2   Ready     <none>   1d      v1.13.0        ...,kubernetes.io/hostname=worker2

Choose one of your nodes, and add a label to it:
```
kubectl label nodes <your-node-name> disktype=ssd
```
where <your-node-name> is the name of your chosen node.

Verify that your chosen node has a disktype=ssd label:

kubectl get nodes --show-labels

The output is similar to this:

NAME      STATUS    ROLES    AGE     VERSION        LABELS
worker0   Ready     <none>   1d      v1.13.0        ...,disktype=ssd,kubernetes.io/hostname=worker0
worker1   Ready     <none>   1d      v1.13.0        ...,kubernetes.io/hostname=worker1
worker2   Ready     <none>   1d      v1.13.0        ...,kubernetes.io/hostname=worker2

In the preceding output, you can see that the worker0 node has a disktype=ssd label.

Create a pod that gets scheduled to your chosen node

This pod configuration file describes a pod that has a node selector, disktype: ssd. This means that the pod will get scheduled on a node that has a disktype=ssd label.

pods/pod-nginx.yaml

apiVersion: v1
kind: Pod
metadata:
  name: nginx
  labels:
    env: test
spec:
  containers:
  - name: nginx
    image: nginx
    imagePullPolicy: IfNotPresent
  nodeSelector:
    disktype: ssd

Use the configuration file to create a pod that will get scheduled on your chosen node:
```
kubectl apply -f https://k8s.io/examples/pods/pod-nginx.yaml
```

Verify that the pod is running on your chosen node:

kubectl get pods --output=wide

The output is similar to this:

NAME     READY     STATUS    RESTARTS   AGE    IP           NODE
nginx    1/1       Running   0          13s    10.200.0.4   worker0

Create a pod that gets scheduled to specific node

You can also schedule a pod to one specific node via setting nodeName.

pods/pod-nginx-specific-node.yaml

apiVersion: v1
kind: Pod
metadata:
  name: nginx
spec:
  nodeName: foo-node # schedule pod to specific node
  containers:
  - name: nginx
    image: nginx
    imagePullPolicy: IfNotPresent

Use the configuration file to create a pod that will get scheduled on foo-node only.

What's next

Learn more about labels and selectors.
Learn more about nodes.

17 - Assign Pods to Nodes using Node Affinity

This page shows how to assign a Kubernetes Pod to a particular node using Node Affinity in a Kubernetes cluster.

Before you begin

Your Kubernetes server must be at or later than version v1.10. To check the version, enter kubectl version.

Add a label to a node

List the nodes in your cluster, along with their labels:

kubectl get nodes --show-labels

The output is similar to this:

NAME      STATUS    ROLES    AGE     VERSION        LABELS
worker0   Ready     <none>   1d      v1.13.0        ...,kubernetes.io/hostname=worker0
worker1   Ready     <none>   1d      v1.13.0        ...,kubernetes.io/hostname=worker1
worker2   Ready     <none>   1d      v1.13.0        ...,kubernetes.io/hostname=worker2

Choose one of your nodes, and add a label to it:
```
kubectl label nodes <your-node-name> disktype=ssd
```
where <your-node-name> is the name of your chosen node.

Verify that your chosen node has a disktype=ssd label:

kubectl get nodes --show-labels

The output is similar to this:

NAME      STATUS    ROLES    AGE     VERSION        LABELS
worker0   Ready     <none>   1d      v1.13.0        ...,disktype=ssd,kubernetes.io/hostname=worker0
worker1   Ready     <none>   1d      v1.13.0        ...,kubernetes.io/hostname=worker1
worker2   Ready     <none>   1d      v1.13.0        ...,kubernetes.io/hostname=worker2

In the preceding output, you can see that the worker0 node has a disktype=ssd label.

Schedule a Pod using required node affinity

This manifest describes a Pod that has a requiredDuringSchedulingIgnoredDuringExecution node affinity,disktype: ssd. This means that the pod will get scheduled only on a node that has a disktype=ssd label.

pods/pod-nginx-required-affinity.yaml

apiVersion: v1
kind: Pod
metadata:
  name: nginx
spec:
  affinity:
    nodeAffinity:
      requiredDuringSchedulingIgnoredDuringExecution:
        nodeSelectorTerms:
        - matchExpressions:
          - key: disktype
            operator: In
            values:
            - ssd            
  containers:
  - name: nginx
    image: nginx
    imagePullPolicy: IfNotPresent

Apply the manifest to create a Pod that is scheduled onto your chosen node:

kubectl apply -f https://k8s.io/examples/pods/pod-nginx-required-affinity.yaml

Verify that the pod is running on your chosen node:

kubectl get pods --output=wide

The output is similar to this:

NAME     READY     STATUS    RESTARTS   AGE    IP           NODE
nginx    1/1       Running   0          13s    10.200.0.4   worker0

Schedule a Pod using preferred node affinity

This manifest describes a Pod that has a preferredDuringSchedulingIgnoredDuringExecution node affinity,disktype: ssd. This means that the pod will prefer a node that has a disktype=ssd label.

pods/pod-nginx-preferred-affinity.yaml

apiVersion: v1
kind: Pod
metadata:
  name: nginx
spec:
  affinity:
    nodeAffinity:
      preferredDuringSchedulingIgnoredDuringExecution:
      - weight: 1
        preference:
          matchExpressions:
          - key: disktype
            operator: In
            values:
            - ssd          
  containers:
  - name: nginx
    image: nginx
    imagePullPolicy: IfNotPresent

Apply the manifest to create a Pod that is scheduled onto your chosen node:

kubectl apply -f https://k8s.io/examples/pods/pod-nginx-preferred-affinity.yaml

Verify that the pod is running on your chosen node:

kubectl get pods --output=wide

The output is similar to this:

NAME     READY     STATUS    RESTARTS   AGE    IP           NODE
nginx    1/1       Running   0          13s    10.200.0.4   worker0

What's next

Learn more about Node Affinity.

18 - Configure Pod Initialization

This page shows how to use an Init Container to initialize a Pod before an application Container runs.

Before you begin

To check the version, enter kubectl version.

Create a Pod that has an Init Container

In this exercise you create a Pod that has one application Container and one Init Container. The init container runs to completion before the application container starts.

Here is the configuration file for the Pod:

pods/init-containers.yaml

apiVersion: v1
kind: Pod
metadata:
  name: init-demo
spec:
  containers:
  - name: nginx
    image: nginx
    ports:
    - containerPort: 80
    volumeMounts:
    - name: workdir
      mountPath: /usr/share/nginx/html
  # These containers are run during pod initialization
  initContainers:
  - name: install
    image: busybox:1.28
    command:
    - wget
    - "-O"
    - "/work-dir/index.html"
    - http://info.cern.ch
    volumeMounts:
    - name: workdir
      mountPath: "/work-dir"
  dnsPolicy: Default
  volumes:
  - name: workdir
    emptyDir: {}

In the configuration file, you can see that the Pod has a Volume that the init container and the application container share.

The init container mounts the shared Volume at /work-dir, and the application container mounts the shared Volume at /usr/share/nginx/html. The init container runs the following command and then terminates:

wget -O /work-dir/index.html http://info.cern.ch

Notice that the init container writes the index.html file in the root directory of the nginx server.

Create the Pod:

kubectl apply -f https://k8s.io/examples/pods/init-containers.yaml

Verify that the nginx container is running:

kubectl get pod init-demo

The output shows that the nginx container is running:

NAME        READY     STATUS    RESTARTS   AGE
init-demo   1/1       Running   0          1m

Get a shell into the nginx container running in the init-demo Pod:

kubectl exec -it init-demo -- /bin/bash

In your shell, send a GET request to the nginx server:

root@nginx:~# apt-get update
root@nginx:~# apt-get install curl
root@nginx:~# curl localhost

The output shows that nginx is serving the web page that was written by the init container:

<html><head></head><body><header>
<title>http://info.cern.ch</title>
</header>

<h1>http://info.cern.ch - home of the first website</h1>
  ...
  <li><a href="http://info.cern.ch/hypertext/WWW/TheProject.html">Browse the first website</a></li>
  ...

What's next

Learn more about communicating between Containers running in the same Pod.
Learn more about Init Containers.
Learn more about Volumes.
Learn more about Debugging Init Containers

19 - Attach Handlers to Container Lifecycle Events

This page shows how to attach handlers to Container lifecycle events. Kubernetes supports the postStart and preStop events. Kubernetes sends the postStart event immediately after a Container is started, and it sends the preStop event immediately before the Container is terminated. A Container may specify one handler per event.

Before you begin

To check the version, enter kubectl version.

Define postStart and preStop handlers

In this exercise, you create a Pod that has one Container. The Container has handlers for the postStart and preStop events.

Here is the configuration file for the Pod:

pods/lifecycle-events.yaml

apiVersion: v1
kind: Pod
metadata:
  name: lifecycle-demo
spec:
  containers:
  - name: lifecycle-demo-container
    image: nginx
    lifecycle:
      postStart:
        exec:
          command: ["/bin/sh", "-c", "echo Hello from the postStart handler > /usr/share/message"]
      preStop:
        exec:
          command: ["/bin/sh","-c","nginx -s quit; while killall -0 nginx; do sleep 1; done"]

In the configuration file, you can see that the postStart command writes a message file to the Container's /usr/share directory. The preStop command shuts down nginx gracefully. This is helpful if the Container is being terminated because of a failure.

Create the Pod:

kubectl apply -f https://k8s.io/examples/pods/lifecycle-events.yaml

Verify that the Container in the Pod is running:

kubectl get pod lifecycle-demo

Get a shell into the Container running in your Pod:

kubectl exec -it lifecycle-demo -- /bin/bash

In your shell, verify that the postStart handler created the message file:

root@lifecycle-demo:/# cat /usr/share/message

The output shows the text written by the postStart handler:

Hello from the postStart handler

Discussion

Kubernetes sends the postStart event immediately after the Container is created. There is no guarantee, however, that the postStart handler is called before the Container's entrypoint is called. The postStart handler runs asynchronously relative to the Container's code, but Kubernetes' management of the container blocks until the postStart handler completes. The Container's status is not set to RUNNING until the postStart handler completes.

Kubernetes sends the preStop event immediately before the Container is terminated. Kubernetes' management of the Container blocks until the preStop handler completes, unless the Pod's grace period expires. For more details, see Pod Lifecycle.

Note: Kubernetes only sends the preStop event when a Pod or a container in the Pod is terminated. This means that the preStop hook is not invoked when the Pod is completed. About this limitation, please see Container hooks for the detail.

What's next

Learn more about Container lifecycle hooks.
Learn more about the lifecycle of a Pod.

Reference

Lifecycle
Container
See terminationGracePeriodSeconds in PodSpec

20 - Configure a Pod to Use a ConfigMap

Many applications rely on configuration which is used during either application initialization or runtime. Most times, there is a requirement to adjust values assigned to configuration parameters. ConfigMaps are a Kubernetes mechanism that let you inject configuration data into application pods.

The ConfigMap concept allow you to decouple configuration artifacts from image content to keep containerized applications portable. For example, you can download and run the same container image to spin up containers for the purposes of local development, system test, or running a live end-user workload.

This page provides a series of usage examples demonstrating how to create ConfigMaps and configure Pods using data stored in ConfigMaps.

Before you begin

You need to have the wget tool installed. If you have a different tool such as curl, and you do not have wget, you will need to adapt the step that downloads example data.

Create a ConfigMap

You can use either kubectl create configmap or a ConfigMap generator in kustomization.yaml to create a ConfigMap.

Create a ConfigMap using `kubectl create configmap`

Use the kubectl create configmap command to create ConfigMaps from directories, files, or literal values:

kubectl create configmap <map-name> <data-source>

where <map-name> is the name you want to assign to the ConfigMap and <data-source> is the directory, file, or literal value to draw the data from. The name of a ConfigMap object must be a valid DNS subdomain name.

When you are creating a ConfigMap based on a file, the key in the <data-source> defaults to the basename of the file, and the value defaults to the file content.

You can use kubectl describe or kubectl get to retrieve information about a ConfigMap.

Create a ConfigMap from a directory

You can use kubectl create configmap to create a ConfigMap from multiple files in the same directory. When you are creating a ConfigMap based on a directory, kubectl identifies files whose filename is a valid key in the directory and packages each of those files into the new ConfigMap. Any directory entries except regular files are ignored (for example: subdirectories, symlinks, devices, pipes, and more).

Note:

Each filename being used for ConfigMap creation must consist of only acceptable characters, which are: letters (A to Z and a to z), digits (0 to 9), '-', '_', or '.'. If you use kubectl create configmap with a directory where any of the file names contains an unacceptable character, the kubectl command may fail.

The kubectl command does not print an error when it encounters an invalid filename.

Create the local directory:

mkdir -p configure-pod-container/configmap/

Now, download the sample configuration and create the ConfigMap:

# Download the sample files into `configure-pod-container/configmap/` directory
wget https://kubernetes.io/examples/configmap/game.properties -O configure-pod-container/configmap/game.properties
wget https://kubernetes.io/examples/configmap/ui.properties -O configure-pod-container/configmap/ui.properties

# Create the ConfigMap
kubectl create configmap game-config --from-file=configure-pod-container/configmap/

The above command packages each file, in this case, game.properties and ui.properties in the configure-pod-container/configmap/ directory into the game-config ConfigMap. You can display details of the ConfigMap using the following command:

kubectl describe configmaps game-config

The output is similar to this:

Name:         game-config
Namespace:    default
Labels:       <none>
Annotations:  <none>

Data
====
game.properties:
----
enemies=aliens
lives=3
enemies.cheat=true
enemies.cheat.level=noGoodRotten
secret.code.passphrase=UUDDLRLRBABAS
secret.code.allowed=true
secret.code.lives=30
ui.properties:
----
color.good=purple
color.bad=yellow
allow.textmode=true
how.nice.to.look=fairlyNice

The game.properties and ui.properties files in the configure-pod-container/configmap/ directory are represented in the data section of the ConfigMap.

kubectl get configmaps game-config -o yaml

The output is similar to this:

apiVersion: v1
kind: ConfigMap
metadata:
  creationTimestamp: 2022-02-18T18:52:05Z
  name: game-config
  namespace: default
  resourceVersion: "516"
  uid: b4952dc3-d670-11e5-8cd0-68f728db1985
data:
  game.properties: |
    enemies=aliens
    lives=3
    enemies.cheat=true
    enemies.cheat.level=noGoodRotten
    secret.code.passphrase=UUDDLRLRBABAS
    secret.code.allowed=true
    secret.code.lives=30    
  ui.properties: |
    color.good=purple
    color.bad=yellow
    allow.textmode=true
    how.nice.to.look=fairlyNice

Create ConfigMaps from files

You can use kubectl create configmap to create a ConfigMap from an individual file, or from multiple files.

For example,

kubectl create configmap game-config-2 --from-file=configure-pod-container/configmap/game.properties

would produce the following ConfigMap:

kubectl describe configmaps game-config-2

where the output is similar to this:

Name:         game-config-2
Namespace:    default
Labels:       <none>
Annotations:  <none>

Data
====
game.properties:
----
enemies=aliens
lives=3
enemies.cheat=true
enemies.cheat.level=noGoodRotten
secret.code.passphrase=UUDDLRLRBABAS
secret.code.allowed=true
secret.code.lives=30

You can pass in the --from-file argument multiple times to create a ConfigMap from multiple data sources.

kubectl create configmap game-config-2 --from-file=configure-pod-container/configmap/game.properties --from-file=configure-pod-container/configmap/ui.properties

You can display details of the game-config-2 ConfigMap using the following command:

kubectl describe configmaps game-config-2

The output is similar to this:

Name:         game-config-2
Namespace:    default
Labels:       <none>
Annotations:  <none>

Data
====
game.properties:
----
enemies=aliens
lives=3
enemies.cheat=true
enemies.cheat.level=noGoodRotten
secret.code.passphrase=UUDDLRLRBABAS
secret.code.allowed=true
secret.code.lives=30
ui.properties:
----
color.good=purple
color.bad=yellow
allow.textmode=true
how.nice.to.look=fairlyNice

Use the option --from-env-file to create a ConfigMap from an env-file, for example:

# Env-files contain a list of environment variables.
# These syntax rules apply:
#   Each line in an env file has to be in VAR=VAL format.
#   Lines beginning with # (i.e. comments) are ignored.
#   Blank lines are ignored.
#   There is no special handling of quotation marks (i.e. they will be part of the ConfigMap value)).

# Download the sample files into `configure-pod-container/configmap/` directory
wget https://kubernetes.io/examples/configmap/game-env-file.properties -O configure-pod-container/configmap/game-env-file.properties
wget https://kubernetes.io/examples/configmap/ui-env-file.properties -O configure-pod-container/configmap/ui-env-file.properties

# The env-file `game-env-file.properties` looks like below
cat configure-pod-container/configmap/game-env-file.properties
enemies=aliens
lives=3
allowed="true"

# This comment and the empty line above it are ignored

kubectl create configmap game-config-env-file \
       --from-env-file=configure-pod-container/configmap/game-env-file.properties

would produce a ConfigMap. View the ConfigMap:

kubectl get configmap game-config-env-file -o yaml

the output is similar to:

apiVersion: v1
kind: ConfigMap
metadata:
  creationTimestamp: 2019-12-27T18:36:28Z
  name: game-config-env-file
  namespace: default
  resourceVersion: "809965"
  uid: d9d1ca5b-eb34-11e7-887b-42010a8002b8
data:
  allowed: '"true"'
  enemies: aliens
  lives: "3"

Starting with Kubernetes v1.23, kubectl supports the --from-env-file argument to be specified multiple times to create a ConfigMap from multiple data sources.

kubectl create configmap config-multi-env-files \
        --from-env-file=configure-pod-container/configmap/game-env-file.properties \
        --from-env-file=configure-pod-container/configmap/ui-env-file.properties

would produce the following ConfigMap:

kubectl get configmap config-multi-env-files -o yaml

where the output is similar to this:

apiVersion: v1
kind: ConfigMap
metadata:
  creationTimestamp: 2019-12-27T18:38:34Z
  name: config-multi-env-files
  namespace: default
  resourceVersion: "810136"
  uid: 252c4572-eb35-11e7-887b-42010a8002b8
data:
  allowed: '"true"'
  color: purple
  enemies: aliens
  how: fairlyNice
  lives: "3"
  textmode: "true"

Define the key to use when creating a ConfigMap from a file

You can define a key other than the file name to use in the data section of your ConfigMap when using the --from-file argument:

kubectl create configmap game-config-3 --from-file=<my-key-name>=<path-to-file>

where <my-key-name> is the key you want to use in the ConfigMap and <path-to-file> is the location of the data source file you want the key to represent.

For example:

kubectl create configmap game-config-3 --from-file=game-special-key=configure-pod-container/configmap/game.properties

would produce the following ConfigMap:

kubectl get configmaps game-config-3 -o yaml

where the output is similar to this:

apiVersion: v1
kind: ConfigMap
metadata:
  creationTimestamp: 2022-02-18T18:54:22Z
  name: game-config-3
  namespace: default
  resourceVersion: "530"
  uid: 05f8da22-d671-11e5-8cd0-68f728db1985
data:
  game-special-key: |
    enemies=aliens
    lives=3
    enemies.cheat=true
    enemies.cheat.level=noGoodRotten
    secret.code.passphrase=UUDDLRLRBABAS
    secret.code.allowed=true
    secret.code.lives=30

Create ConfigMaps from literal values

You can use kubectl create configmap with the --from-literal argument to define a literal value from the command line:

kubectl create configmap special-config --from-literal=special.how=very --from-literal=special.type=charm

You can pass in multiple key-value pairs. Each pair provided on the command line is represented as a separate entry in the data section of the ConfigMap.

kubectl get configmaps special-config -o yaml

The output is similar to this:

apiVersion: v1
kind: ConfigMap
metadata:
  creationTimestamp: 2022-02-18T19:14:38Z
  name: special-config
  namespace: default
  resourceVersion: "651"
  uid: dadce046-d673-11e5-8cd0-68f728db1985
data:
  special.how: very
  special.type: charm

Create a ConfigMap from generator

You can also create a ConfigMap from generators and then apply it to create the object in the cluster's API server. You should specify the generators in a kustomization.yaml file within a directory.

Generate ConfigMaps from files

For example, to generate a ConfigMap from files configure-pod-container/configmap/game.properties

# Create a kustomization.yaml file with ConfigMapGenerator
cat <<EOF >./kustomization.yaml
configMapGenerator:
- name: game-config-4
  options:
    labels:
      game-config: config-4
  files:
  - configure-pod-container/configmap/game.properties
EOF

Apply the kustomization directory to create the ConfigMap object:

kubectl apply -k .

configmap/game-config-4-m9dm2f92bt created

You can check that the ConfigMap was created like this:

kubectl get configmap

NAME                       DATA   AGE
game-config-4-m9dm2f92bt   1      37s

and also:

kubectl describe configmaps/game-config-4-m9dm2f92bt

Name:         game-config-4-m9dm2f92bt
Namespace:    default
Labels:       game-config=config-4
Annotations:  kubectl.kubernetes.io/last-applied-configuration:
                {"apiVersion":"v1","data":{"game.properties":"enemies=aliens\nlives=3\nenemies.cheat=true\nenemies.cheat.level=noGoodRotten\nsecret.code.p...

Data
====
game.properties:
----
enemies=aliens
lives=3
enemies.cheat=true
enemies.cheat.level=noGoodRotten
secret.code.passphrase=UUDDLRLRBABAS
secret.code.allowed=true
secret.code.lives=30
Events:  <none>

Notice that the generated ConfigMap name has a suffix appended by hashing the contents. This ensures that a new ConfigMap is generated each time the content is modified.

Define the key to use when generating a ConfigMap from a file

You can define a key other than the file name to use in the ConfigMap generator. For example, to generate a ConfigMap from files configure-pod-container/configmap/game.properties with the key game-special-key

# Create a kustomization.yaml file with ConfigMapGenerator
cat <<EOF >./kustomization.yaml
configMapGenerator:
- name: game-config-5
  options:
    labels:
      game-config: config-5
  files:
  - game-special-key=configure-pod-container/configmap/game.properties
EOF

Apply the kustomization directory to create the ConfigMap object.

kubectl apply -k .

configmap/game-config-5-m67dt67794 created

Generate ConfigMaps from literals

This example shows you how to create a ConfigMap from two literal key/value pairs: special.type=charm and special.how=very, using Kustomize and kubectl. To achieve this, you can specify the ConfigMap generator. Create (or replace) kustomization.yaml so that it has the following contents:

---
# kustomization.yaml contents for creating a ConfigMap from literals
configMapGenerator:
- name: special-config-2
  literals:
  - special.how=very
  - special.type=charm

Apply the kustomization directory to create the ConfigMap object:

kubectl apply -k .

configmap/special-config-2-c92b5mmcf2 created

Interim cleanup

Before proceeding, clean up some of the ConfigMaps you made:

kubectl delete configmap special-config
kubectl delete configmap env-config
kubectl delete configmap -l 'game-config in (config-4,config-5)’

Now that you have learned to define ConfigMaps, you can move on to the next section, and learn how to use these objects with Pods.

Define container environment variables using ConfigMap data

Define a container environment variable with data from a single ConfigMap

Define an environment variable as a key-value pair in a ConfigMap:

kubectl create configmap special-config --from-literal=special.how=very

Assign the special.how value defined in the ConfigMap to the SPECIAL_LEVEL_KEY environment variable in the Pod specification.

pods/pod-single-configmap-env-variable.yaml

apiVersion: v1
kind: Pod
metadata:
  name: dapi-test-pod
spec:
  containers:
    - name: test-container
      image: registry.k8s.io/busybox
      command: [ "/bin/sh", "-c", "env" ]
      env:
        # Define the environment variable
        - name: SPECIAL_LEVEL_KEY
          valueFrom:
            configMapKeyRef:
              # The ConfigMap containing the value you want to assign to SPECIAL_LEVEL_KEY
              name: special-config
              # Specify the key associated with the value
              key: special.how
  restartPolicy: Never

Create the Pod:

kubectl create -f https://kubernetes.io/examples/pods/pod-single-configmap-env-variable.yaml

Now, the Pod's output includes environment variable SPECIAL_LEVEL_KEY=very.

Define container environment variables with data from multiple ConfigMaps

As with the previous example, create the ConfigMaps first. Here is the manifest you will use:

configmap/configmaps.yaml

apiVersion: v1
kind: ConfigMap
metadata:
  name: special-config
  namespace: default
data:
  special.how: very
---
apiVersion: v1
kind: ConfigMap
metadata:
  name: env-config
  namespace: default
data:
  log_level: INFO

Create the ConfigMap:

kubectl create -f https://kubernetes.io/examples/configmap/configmaps.yaml

Define the environment variables in the Pod specification.

pods/pod-multiple-configmap-env-variable.yaml

apiVersion: v1
kind: Pod
metadata:
  name: dapi-test-pod
spec:
  containers:
    - name: test-container
      image: registry.k8s.io/busybox
      command: [ "/bin/sh", "-c", "env" ]
      env:
        - name: SPECIAL_LEVEL_KEY
          valueFrom:
            configMapKeyRef:
              name: special-config
              key: special.how
        - name: LOG_LEVEL
          valueFrom:
            configMapKeyRef:
              name: env-config
              key: log_level
  restartPolicy: Never

Create the Pod:

kubectl create -f https://kubernetes.io/examples/pods/pod-multiple-configmap-env-variable.yaml

Now, the Pod's output includes environment variables SPECIAL_LEVEL_KEY=very and LOG_LEVEL=INFO.

Once you're happy to move on, delete that Pod:

kubectl delete pod dapi-test-pod --now

Configure all key-value pairs in a ConfigMap as container environment variables

Create a ConfigMap containing multiple key-value pairs.

configmap/configmap-multikeys.yaml

apiVersion: v1
kind: ConfigMap
metadata:
  name: special-config
  namespace: default
data:
  SPECIAL_LEVEL: very
  SPECIAL_TYPE: charm

Create the ConfigMap:

kubectl create -f https://kubernetes.io/examples/configmap/configmap-multikeys.yaml

Use envFrom to define all of the ConfigMap's data as container environment variables. The key from the ConfigMap becomes the environment variable name in the Pod.

pods/pod-configmap-envFrom.yaml

apiVersion: v1
kind: Pod
metadata:
  name: dapi-test-pod
spec:
  containers:
    - name: test-container
      image: registry.k8s.io/busybox
      command: [ "/bin/sh", "-c", "env" ]
      envFrom:
      - configMapRef:
          name: special-config
  restartPolicy: Never

Create the Pod:

kubectl create -f https://kubernetes.io/examples/pods/pod-configmap-envFrom.yaml

Now, the Pod's output includes environment variables SPECIAL_LEVEL=very and SPECIAL_TYPE=charm.

Once you're happy to move on, delete that Pod:

kubectl delete pod dapi-test-pod --now

Use ConfigMap-defined environment variables in Pod commands

You can use ConfigMap-defined environment variables in the command and args of a container using the $(VAR_NAME) Kubernetes substitution syntax.

For example, the following Pod manifest:

pods/pod-configmap-env-var-valueFrom.yaml

apiVersion: v1
kind: Pod
metadata:
  name: dapi-test-pod
spec:
  containers:
    - name: test-container
      image: registry.k8s.io/busybox
      command: [ "/bin/echo", "$(SPECIAL_LEVEL_KEY) $(SPECIAL_TYPE_KEY)" ]
      env:
        - name: SPECIAL_LEVEL_KEY
          valueFrom:
            configMapKeyRef:
              name: special-config
              key: SPECIAL_LEVEL
        - name: SPECIAL_TYPE_KEY
          valueFrom:
            configMapKeyRef:
              name: special-config
              key: SPECIAL_TYPE
  restartPolicy: Never

Create that Pod, by running:

kubectl create -f https://kubernetes.io/examples/pods/pod-configmap-env-var-valueFrom.yaml

That pod produces the following output from the test-container container:

kubectl logs dapi-test-pod

very charm

Once you're happy to move on, delete that Pod:

kubectl delete pod dapi-test-pod --now

Add ConfigMap data to a Volume

As explained in Create ConfigMaps from files, when you create a ConfigMap using --from-file, the filename becomes a key stored in the data section of the ConfigMap. The file contents become the key's value.

The examples in this section refer to a ConfigMap named special-config:

configmap/configmap-multikeys.yaml

apiVersion: v1
kind: ConfigMap
metadata:
  name: special-config
  namespace: default
data:
  SPECIAL_LEVEL: very
  SPECIAL_TYPE: charm

Create the ConfigMap:

kubectl create -f https://kubernetes.io/examples/configmap/configmap-multikeys.yaml

Populate a Volume with data stored in a ConfigMap

Add the ConfigMap name under the volumes section of the Pod specification. This adds the ConfigMap data to the directory specified as volumeMounts.mountPath (in this case, /etc/config). The command section lists directory files with names that match the keys in ConfigMap.

pods/pod-configmap-volume.yaml

apiVersion: v1
kind: Pod
metadata:
  name: dapi-test-pod
spec:
  containers:
    - name: test-container
      image: registry.k8s.io/busybox
      command: [ "/bin/sh", "-c", "ls /etc/config/" ]
      volumeMounts:
      - name: config-volume
        mountPath: /etc/config
  volumes:
    - name: config-volume
      configMap:
        # Provide the name of the ConfigMap containing the files you want
        # to add to the container
        name: special-config
  restartPolicy: Never

Create the Pod:

kubectl create -f https://kubernetes.io/examples/pods/pod-configmap-volume.yaml

When the pod runs, the command ls /etc/config/ produces the output below:

SPECIAL_LEVEL
SPECIAL_TYPE

Text data is exposed as files using the UTF-8 character encoding. To use some other character encoding, use binaryData (see ConfigMap object for more details).

Note: If there are any files in the /etc/config directory of that container image, the volume mount will make those files from the image inaccessible.

Once you're happy to move on, delete that Pod:

kubectl delete pod dapi-test-pod --now

Add ConfigMap data to a specific path in the Volume

Use the path field to specify the desired file path for specific ConfigMap items. In this case, the SPECIAL_LEVEL item will be mounted in the config-volume volume at /etc/config/keys.

pods/pod-configmap-volume-specific-key.yaml

apiVersion: v1
kind: Pod
metadata:
  name: dapi-test-pod
spec:
  containers:
    - name: test-container
      image: registry.k8s.io/busybox
      command: [ "/bin/sh","-c","cat /etc/config/keys" ]
      volumeMounts:
      - name: config-volume
        mountPath: /etc/config
  volumes:
    - name: config-volume
      configMap:
        name: special-config
        items:
        - key: SPECIAL_LEVEL
          path: keys
  restartPolicy: Never

Create the Pod:

kubectl create -f https://kubernetes.io/examples/pods/pod-configmap-volume-specific-key.yaml

When the pod runs, the command cat /etc/config/keys produces the output below:

very

Caution: Like before, all previous files in the /etc/config/ directory will be deleted.

Delete that Pod:

kubectl delete pod dapi-test-pod --now

Project keys to specific paths and file permissions

You can project keys to specific paths and specific permissions on a per-file basis. The Secrets guide explains the syntax.

Optional references

A ConfigMap reference may be marked optional. If the ConfigMap is non-existent, the mounted volume will be empty. If the ConfigMap exists, but the referenced key is non-existent, the path will be absent beneath the mount point. See Optional ConfigMaps for more details.

Mounted ConfigMaps are updated automatically

When a mounted ConfigMap is updated, the projected content is eventually updated too. This applies in the case where an optionally referenced ConfigMap comes into existence after a pod has started.

Kubelet checks whether the mounted ConfigMap is fresh on every periodic sync. However, it uses its local TTL-based cache for getting the current value of the ConfigMap. As a result, the total delay from the moment when the ConfigMap is updated to the moment when new keys are projected to the pod can be as long as kubelet sync period (1 minute by default) + TTL of ConfigMaps cache (1 minute by default) in kubelet. You can trigger an immediate refresh by updating one of the pod's annotations.

Note: A container using a ConfigMap as a subPath volume will not receive ConfigMap updates.

Understanding ConfigMaps and Pods

The ConfigMap API resource stores configuration data as key-value pairs. The data can be consumed in pods or provide the configurations for system components such as controllers. ConfigMap is similar to Secrets, but provides a means of working with strings that don't contain sensitive information. Users and system components alike can store configuration data in ConfigMap.

Note: ConfigMaps should reference properties files, not replace them. Think of the ConfigMap as representing something similar to the Linux /etc directory and its contents. For example, if you create a Kubernetes Volume from a ConfigMap, each data item in the ConfigMap is represented by an individual file in the volume.

The ConfigMap's data field contains the configuration data. As shown in the example below, this can be simple (like individual properties defined using --from-literal) or complex (like configuration files or JSON blobs defined using --from-file).

apiVersion: v1
kind: ConfigMap
metadata:
  creationTimestamp: 2016-02-18T19:14:38Z
  name: example-config
  namespace: default
data:
  # example of a simple property defined using --from-literal
  example.property.1: hello
  example.property.2: world
  # example of a complex property defined using --from-file
  example.property.file: |-
    property.1=value-1
    property.2=value-2
    property.3=value-3

When kubectl creates a ConfigMap from inputs that are not ASCII or UTF-8, the tool puts these into the binaryData field of the ConfigMap, and not in data. Both text and binary data sources can be combined in one ConfigMap.

If you want to view the binaryData keys (and their values) in a ConfigMap, you can run kubectl get configmap -o jsonpath='{.binaryData}' <name>.

Pods can load data from a ConfigMap that uses either data or binaryData.

Optional ConfigMaps

You can mark a reference to a ConfigMap as optional in a Pod specification. If the ConfigMap doesn't exist, the configuration for which it provides data in the Pod (for example: environment variable, mounted volume) will be empty. If the ConfigMap exists, but the referenced key is non-existent the data is also empty.

For example, the following Pod specification marks an environment variable from a ConfigMap as optional:

apiVersion: v1
kind: Pod
metadata:
  name: dapi-test-pod
spec:
  containers:
    - name: test-container
      image: gcr.io/google_containers/busybox
      command: ["/bin/sh", "-c", "env"]
      env:
        - name: SPECIAL_LEVEL_KEY
          valueFrom:
            configMapKeyRef:
              name: a-config
              key: akey
              optional: true # mark the variable as optional
  restartPolicy: Never

If you run this pod, and there is no ConfigMap named a-config, the output is empty. If you run this pod, and there is a ConfigMap named a-config but that ConfigMap doesn't have a key named akey, the output is also empty. If you do set a value for akey in the a-config ConfigMap, this pod prints that value and then terminates.

You can also mark the volumes and files provided by a ConfigMap as optional. Kubernetes always creates the mount paths for the volume, even if the referenced ConfigMap or key doesn't exist. For example, the following Pod specification marks a volume that references a ConfigMap as optional:

apiVersion: v1
kind: Pod
metadata:
  name: dapi-test-pod
spec:
  containers:
    - name: test-container
      image: gcr.io/google_containers/busybox
      command: ["/bin/sh", "-c", "ls /etc/config"]
      volumeMounts:
      - name: config-volume
        mountPath: /etc/config
  volumes:
    - name: config-volume
      configMap:
        name: no-config
        optional: true # mark the source ConfigMap as optional
  restartPolicy: Never

Restrictions

You must create the ConfigMap object before you reference it in a Pod specification. Alternatively, mark the ConfigMap reference as optional in the Pod spec (see Optional ConfigMaps). If you reference a ConfigMap that doesn't exist and you don't mark the reference as optional, the Pod won't start. Similarly, references to keys that don't exist in the ConfigMap will also prevent the Pod from starting, unless you mark the key references as optional.

If you use envFrom to define environment variables from ConfigMaps, keys that are considered invalid will be skipped. The pod will be allowed to start, but the invalid names will be recorded in the event log (InvalidVariableNames). The log message lists each skipped key. For example:

kubectl get events

The output is similar to this:

LASTSEEN FIRSTSEEN COUNT NAME          KIND  SUBOBJECT  TYPE      REASON                            SOURCE                MESSAGE
0s       0s        1     dapi-test-pod Pod              Warning   InvalidEnvironmentVariableNames   {kubelet, 127.0.0.1}  Keys [1badkey, 2alsobad] from the EnvFrom configMap default/myconfig were skipped since they are considered invalid environment variable names.

ConfigMaps reside in a specific Namespace. Pods can only refer to ConfigMaps that are in the same namespace as the Pod.
You can't use ConfigMaps for static pods, because the kubelet does not support this.

Cleaning up

Delete the ConfigMaps and Pods that you made:

kubectl delete configmaps/game-config configmaps/game-config-2 configmaps/game-config-3 \
               configmaps/game-config-env-file
kubectl delete pod dapi-test-pod --now

# You might already have removed the next set
kubectl delete configmaps/special-config configmaps/env-config
kubectl delete configmap -l 'game-config in (config-4,config-5)’

If you created a directory configure-pod-container and no longer need it, you should remove that too, or move it into the trash can / deleted files location.

What's next

Follow a real world example of Configuring Redis using a ConfigMap.

21 - Share Process Namespace between Containers in a Pod

This page shows how to configure process namespace sharing for a pod. When process namespace sharing is enabled, processes in a container are visible to all other containers in the same pod.

You can use this feature to configure cooperating containers, such as a log handler sidecar container, or to troubleshoot container images that don't include debugging utilities like a shell.

Before you begin

Configure a Pod

Process namespace sharing is enabled using the shareProcessNamespace field of .spec for a Pod. For example:

pods/share-process-namespace.yaml

apiVersion: v1
kind: Pod
metadata:
  name: nginx
spec:
  shareProcessNamespace: true
  containers:
  - name: nginx
    image: nginx
  - name: shell
    image: busybox:1.28
    command: ["sleep", "3600"]
    securityContext:
      capabilities:
        add:
        - SYS_PTRACE
    stdin: true
    tty: true

Create the pod nginx on your cluster:

kubectl apply -f https://k8s.io/examples/pods/share-process-namespace.yaml

Attach to the shell container and run ps:

kubectl attach -it nginx -c shell

If you don't see a command prompt, try pressing enter. In the container shell:

# run this inside the "shell" container
ps ax

The output is similar to this:

PID   USER     TIME  COMMAND
    1 root      0:00 /pause
    8 root      0:00 nginx: master process nginx -g daemon off;
   14 101       0:00 nginx: worker process
   15 root      0:00 sh
   21 root      0:00 ps ax

You can signal processes in other containers. For example, send SIGHUP to nginx to restart the worker process. This requires the SYS_PTRACE capability.

# run this inside the "shell" container
kill -HUP 8   # change "8" to match the PID of the nginx leader process, if necessary
ps ax

The output is similar to this:

PID   USER     TIME  COMMAND
    1 root      0:00 /pause
    8 root      0:00 nginx: master process nginx -g daemon off;
   15 root      0:00 sh
   22 101       0:00 nginx: worker process
   23 root      0:00 ps ax

It's even possible to access the file system of another container using the /proc/$pid/root link.

# run this inside the "shell" container
# change "8" to the PID of the Nginx process, if necessary
head /proc/8/root/etc/nginx/nginx.conf

The output is similar to this:

user  nginx;
worker_processes  1;

error_log  /var/log/nginx/error.log warn;
pid        /var/run/nginx.pid;


events {
    worker_connections  1024;

Pods share many resources so it makes sense they would also share a process namespace. Some containers may expect to be isolated from others, though, so it's important to understand the differences:

The container process no longer has PID 1. Some containers refuse to start without PID 1 (for example, containers using systemd) or run commands like kill -HUP 1 to signal the container process. In pods with a shared process namespace, kill -HUP 1 will signal the pod sandbox (/pause in the above example).
Processes are visible to other containers in the pod. This includes all information visible in /proc, such as passwords that were passed as arguments or environment variables. These are protected only by regular Unix permissions.
Container filesystems are visible to other containers in the pod through the /proc/$pid/root link. This makes debugging easier, but it also means that filesystem secrets are protected only by filesystem permissions.

22 - Use a User Namespace With a Pod

FEATURE STATE: Kubernetes v1.25 [alpha]

This page shows how to configure a user namespace for pods. This allows you to isolate the user running inside the container from the one in the host.

A process running as root in a container can run as a different (non-root) user in the host; in other words, the process has full privileges for operations inside the user namespace, but is unprivileged for operations outside the namespace.

You can use this feature to reduce the damage a compromised container can do to the host or other pods in the same node. There are several security vulnerabilities rated either HIGH or CRITICAL that were not exploitable when user namespaces is active. It is expected user namespace will mitigate some future vulnerabilities too.

Without using a user namespace a container running as root, in the case of a container breakout, has root privileges on the node. And if some capability were granted to the container, the capabilities are valid on the host too. None of this is true when user namespaces are used.

Before you begin

Your Kubernetes server must be at or later than version v1.25. To check the version, enter kubectl version.

🛇 This item links to a third party project or product that is not part of Kubernetes itself. More information

The node OS needs to be Linux
You need to exec commands in the host
You need to be able to exec into pods
You need to enable the UserNamespacesSupport feature gate

Note: The feature gate to enable user namespaces was previously named UserNamespacesStatelessPodsSupport, when only stateless pods were supported. Only Kubernetes v1.25 through to v1.27 recognise UserNamespacesStatelessPodsSupport.

The cluster that you're using must include at least one node that meets the requirements for using user namespaces with Pods.

If you have a mixture of nodes and only some of the nodes provide user namespace support for Pods, you also need to ensure that the user namespace Pods are scheduled to suitable nodes.

Please note that if your container runtime doesn't support user namespaces, the hostUsers field in the pod spec will be silently ignored and the pod will be created without user namespaces.

Run a Pod that uses a user namespace

A user namespace for a pod is enabled setting the hostUsers field of .spec to false. For example:

pods/user-namespaces-stateless.yaml

apiVersion: v1
kind: Pod
metadata:
  name: userns
spec:
  hostUsers: false
  containers:
  - name: shell
    command: ["sleep", "infinity"]
    image: debian

Create the pod on your cluster:

kubectl apply -f https://k8s.io/examples/pods/user-namespaces-stateless.yaml

Attach to the container and run readlink /proc/self/ns/user:
```
kubectl attach -it userns bash
```

And run the command. The output is similar to this:

readlink /proc/self/ns/user
user:[4026531837]
cat /proc/self/uid_map
0          0 4294967295

Then, open a shell in the host and run the same command.

The output must be different. This means the host and the pod are using a different user namespace. When user namespaces are not enabled, the host and the pod use the same user namespace.

If you are running the kubelet inside a user namespace, you need to compare the output from running the command in the pod to the output of running in the host:

readlink /proc/$pid/ns/user
user:[4026534732]

replacing $pid with the kubelet PID.

23 - Create static Pods

Static Pods are managed directly by the kubelet daemon on a specific node, without the API server observing them. Unlike Pods that are managed by the control plane (for example, a Deployment); instead, the kubelet watches each static Pod (and restarts it if it fails).

Static Pods are always bound to one Kubelet on a specific node.

The kubelet automatically tries to create a mirror Pod on the Kubernetes API server for each static Pod. This means that the Pods running on a node are visible on the API server, but cannot be controlled from there. The Pod names will be suffixed with the node hostname with a leading hyphen.

Note: If you are running clustered Kubernetes and are using static Pods to run a Pod on every node, you should probably be using a instead.

Note: The spec of a static Pod cannot refer to other API objects (e.g., , , , etc).

Note: Static pods do not support ephemeral containers.

Before you begin

To check the version, enter kubectl version.

This page assumes you're using CRI-O to run Pods, and that your nodes are running the Fedora operating system. Instructions for other distributions or Kubernetes installations may vary.

Create a static pod

You can configure a static Pod with either a file system hosted configuration file or a web hosted configuration file.

Filesystem-hosted static Pod manifest

Manifests are standard Pod definitions in JSON or YAML format in a specific directory. Use the staticPodPath: <the directory> field in the kubelet configuration file, which periodically scans the directory and creates/deletes static Pods as YAML/JSON files appear/disappear there. Note that the kubelet will ignore files starting with dots when scanning the specified directory.

For example, this is how to start a simple web server as a static Pod:

Choose a node where you want to run the static Pod. In this example, it's my-node1.
```
ssh my-node1
```

Choose a directory, say /etc/kubernetes/manifests and place a web server Pod definition there, for example /etc/kubernetes/manifests/static-web.yaml:

# Run this command on the node where kubelet is running
mkdir -p /etc/kubernetes/manifests/
cat <<EOF >/etc/kubernetes/manifests/static-web.yaml
apiVersion: v1
kind: Pod
metadata:
  name: static-web
  labels:
    role: myrole
spec:
  containers:
    - name: web
      image: nginx
      ports:
        - name: web
          containerPort: 80
          protocol: TCP
EOF

Configure your kubelet on the node to use this directory by running it with --pod-manifest-path=/etc/kubernetes/manifests/ argument. On Fedora, edit /etc/kubernetes/kubelet to include this line:
```
KUBELET_ARGS="--cluster-dns=10.254.0.10 --cluster-domain=kube.local --pod-manifest-path=/etc/kubernetes/manifests/"
```
or add the staticPodPath: <the directory> field in the kubelet configuration file.

Restart the kubelet. On Fedora, you would run:

# Run this command on the node where the kubelet is running
systemctl restart kubelet

Web-hosted static pod manifest

Kubelet periodically downloads a file specified by --manifest-url=<URL> argument and interprets it as a JSON/YAML file that contains Pod definitions. Similar to how filesystem-hosted manifests work, the kubelet refetches the manifest on a schedule. If there are changes to the list of static Pods, the kubelet applies them.

To use this approach:

Create a YAML file and store it on a web server so that you can pass the URL of that file to the kubelet.

apiVersion: v1
kind: Pod
metadata:
  name: static-web
  labels:
    role: myrole
spec:
  containers:
    - name: web
      image: nginx
      ports:
        - name: web
          containerPort: 80
          protocol: TCP

Configure the kubelet on your selected node to use this web manifest by running it with --manifest-url=<manifest-url>. On Fedora, edit /etc/kubernetes/kubelet to include this line:
```
KUBELET_ARGS="--cluster-dns=10.254.0.10 --cluster-domain=kube.local --manifest-url=<manifest-url>"
```

Restart the kubelet. On Fedora, you would run:

# Run this command on the node where the kubelet is running
systemctl restart kubelet

Observe static pod behavior

When the kubelet starts, it automatically starts all defined static Pods. As you have defined a static Pod and restarted the kubelet, the new static Pod should already be running.

You can view running containers (including static Pods) by running (on the node):

# Run this command on the node where the kubelet is running
crictl ps

The output might be something like:

CONTAINER       IMAGE                                 CREATED           STATE      NAME    ATTEMPT    POD ID
129fd7d382018   docker.io/library/nginx@sha256:...    11 minutes ago    Running    web     0          34533c6729106

Note: crictl outputs the image URI and SHA-256 checksum. NAME will look more like: docker.io/library/nginx@sha256:0d17b565c37bcbd895e9d92315a05c1c3c9a29f762b011a10c54a66cd53c9b31.

You can see the mirror Pod on the API server:

kubectl get pods

NAME                  READY   STATUS    RESTARTS        AGE
static-web-my-node1   1/1     Running   0               2m

Note: Make sure the kubelet has permission to create the mirror Pod in the API server. If not, the creation request is rejected by the API server.

Labels from the static Pod are propagated into the mirror Pod. You can use those labels as normal via selectors, etc.

If you try to use kubectl to delete the mirror Pod from the API server, the kubelet doesn't remove the static Pod:

kubectl delete pod static-web-my-node1

pod "static-web-my-node1" deleted

You can see that the Pod is still running:

kubectl get pods

NAME                  READY   STATUS    RESTARTS   AGE
static-web-my-node1   1/1     Running   0          4s

Back on your node where the kubelet is running, you can try to stop the container manually. You'll see that, after a time, the kubelet will notice and will restart the Pod automatically:

# Run these commands on the node where the kubelet is running
crictl stop 129fd7d382018 # replace with the ID of your container
sleep 20
crictl ps

CONTAINER       IMAGE                                 CREATED           STATE      NAME    ATTEMPT    POD ID
89db4553e1eeb   docker.io/library/nginx@sha256:...    19 seconds ago    Running    web     1          34533c6729106

Once you identify the right container, you can get the logs for that container with crictl:

# Run these commands on the node where the container is running
crictl logs <container_id>

10.240.0.48 - - [16/Nov/2022:12:45:49 +0000] "GET / HTTP/1.1" 200 612 "-" "curl/7.47.0" "-"
10.240.0.48 - - [16/Nov/2022:12:45:50 +0000] "GET / HTTP/1.1" 200 612 "-" "curl/7.47.0" "-"
10.240.0.48 - - [16/Nove/2022:12:45:51 +0000] "GET / HTTP/1.1" 200 612 "-" "curl/7.47.0" "-"

To find more about how to debug using crictl, please visit Debugging Kubernetes nodes with crictl.

Dynamic addition and removal of static pods

The running kubelet periodically scans the configured directory (/etc/kubernetes/manifests in our example) for changes and adds/removes Pods as files appear/disappear in this directory.

# This assumes you are using filesystem-hosted static Pod configuration
# Run these commands on the node where the container is running
#
mv /etc/kubernetes/manifests/static-web.yaml /tmp
sleep 20
crictl ps
# You see that no nginx container is running
mv /tmp/static-web.yaml  /etc/kubernetes/manifests/
sleep 20
crictl ps

CONTAINER       IMAGE                                 CREATED           STATE      NAME    ATTEMPT    POD ID
f427638871c35   docker.io/library/nginx@sha256:...    19 seconds ago    Running    web     1          34533c6729106

What's next

24 - Translate a Docker Compose File to Kubernetes Resources

What's Kompose? It's a conversion tool for all things compose (namely Docker Compose) to container orchestrators (Kubernetes or OpenShift).

More information can be found on the Kompose website at http://kompose.io.

Before you begin

To check the version, enter kubectl version.

Install Kompose

We have multiple ways to install Kompose. Our preferred method is downloading the binary from the latest GitHub release.

Kompose is released via GitHub on a three-week cycle, you can see all current releases on the GitHub release page.

# Linux
curl -L https://github.com/kubernetes/kompose/releases/download/v1.26.0/kompose-linux-amd64 -o kompose

# macOS
curl -L https://github.com/kubernetes/kompose/releases/download/v1.26.0/kompose-darwin-amd64 -o kompose

# Windows
curl -L https://github.com/kubernetes/kompose/releases/download/v1.26.0/kompose-windows-amd64.exe -o kompose.exe

chmod +x kompose
sudo mv ./kompose /usr/local/bin/kompose

Alternatively, you can download the tarball.

Installing using go get pulls from the master branch with the latest development changes.

go get -u github.com/kubernetes/kompose

Kompose is in EPEL CentOS repository. If you don't have EPEL repository already installed and enabled you can do it by running sudo yum install epel-release.

If you have EPEL enabled in your system, you can install Kompose like any other package.

sudo yum -y install kompose

Kompose is in Fedora 24, 25 and 26 repositories. You can install it like any other package.

sudo dnf -y install kompose

On macOS you can install the latest release via Homebrew:

brew install kompose

Use Kompose

In a few steps, we'll take you from Docker Compose to Kubernetes. All you need is an existing docker-compose.yml file.

Go to the directory containing your docker-compose.yml file. If you don't have one, test using this one.

version: "2"

services:

  redis-master:
    image: registry.k8s.io/redis:e2e
    ports:
      - "6379"

  redis-slave:
    image: gcr.io/google_samples/gb-redisslave:v3
    ports:
      - "6379"
    environment:
      - GET_HOSTS_FROM=dns

  frontend:
    image: gcr.io/google-samples/gb-frontend:v4
    ports:
      - "80:80"
    environment:
      - GET_HOSTS_FROM=dns
    labels:
      kompose.service.type: LoadBalancer

To convert the docker-compose.yml file to files that you can use with kubectl, run kompose convert and then kubectl apply -f <output file>.

kompose convert

The output is similar to:

INFO Kubernetes file "frontend-tcp-service.yaml" created 
INFO Kubernetes file "redis-master-service.yaml" created 
INFO Kubernetes file "redis-slave-service.yaml" created 
INFO Kubernetes file "frontend-deployment.yaml" created 
INFO Kubernetes file "redis-master-deployment.yaml" created 
INFO Kubernetes file "redis-slave-deployment.yaml" created

 kubectl apply -f frontend-tcp-service.yaml,redis-master-service.yaml,redis-slave-service.yaml,frontend-deployment.yaml,redis-master-deployment.yaml,redis-slave-deployment.yaml

The output is similar to:

service/frontend-tcp created
service/redis-master created
service/redis-slave created
deployment.apps/frontend created
deployment.apps/redis-master created
deployment.apps/redis-slave created

Your deployments are running in Kubernetes.

Access your application.

If you're already using minikube for your development process:

minikube service frontend

Otherwise, let's look up what IP your service is using!

kubectl describe svc frontend

Name:                     frontend-tcp
Namespace:                default
Labels:                   io.kompose.service=frontend-tcp
Annotations:              kompose.cmd: kompose convert
                          kompose.service.type: LoadBalancer
                          kompose.version: 1.26.0 (40646f47)
Selector:                 io.kompose.service=frontend
Type:                     LoadBalancer
IP Family Policy:         SingleStack
IP Families:              IPv4
IP:                       10.43.67.174
IPs:                      10.43.67.174
Port:                     80  80/TCP
TargetPort:               80/TCP
NodePort:                 80  31254/TCP
Endpoints:                10.42.0.25:80
Session Affinity:         None
External Traffic Policy:  Cluster
Events:
  Type    Reason                Age   From                Message
  ----    ------                ----  ----                -------
  Normal  EnsuringLoadBalancer  62s   service-controller  Ensuring load balancer
  Normal  AppliedDaemonSet      62s   service-controller  Applied LoadBalancer DaemonSet kube-system/svclb-frontend-tcp-9362d276

If you're using a cloud provider, your IP will be listed next to LoadBalancer Ingress.

curl http://192.0.2.89

Clean-up.

After you are finished testing out the example application deployment, simply run the following command in your shell to delete the resources used.

kubectl delete -f frontend-tcp-service.yaml,redis-master-service.yaml,redis-slave-service.yaml,frontend-deployment.yaml,redis-master-deployment.yaml,redis-slave-deployment.yaml

Kompose has support for two providers: OpenShift and Kubernetes. You can choose a targeted provider using global option --provider. If no provider is specified, Kubernetes is set by default.

`kompose convert`

Kompose supports conversion of V1, V2, and V3 Docker Compose files into Kubernetes and OpenShift objects.

Kubernetes `kompose convert` example

kompose --file docker-voting.yml convert

WARN Unsupported key networks - ignoring
WARN Unsupported key build - ignoring
INFO Kubernetes file "worker-svc.yaml" created
INFO Kubernetes file "db-svc.yaml" created
INFO Kubernetes file "redis-svc.yaml" created
INFO Kubernetes file "result-svc.yaml" created
INFO Kubernetes file "vote-svc.yaml" created
INFO Kubernetes file "redis-deployment.yaml" created
INFO Kubernetes file "result-deployment.yaml" created
INFO Kubernetes file "vote-deployment.yaml" created
INFO Kubernetes file "worker-deployment.yaml" created
INFO Kubernetes file "db-deployment.yaml" created

ls

db-deployment.yaml  docker-compose.yml         docker-gitlab.yml  redis-deployment.yaml  result-deployment.yaml  vote-deployment.yaml  worker-deployment.yaml
db-svc.yaml         docker-voting.yml          redis-svc.yaml     result-svc.yaml        vote-svc.yaml           worker-svc.yaml

You can also provide multiple docker-compose files at the same time:

kompose -f docker-compose.yml -f docker-guestbook.yml convert

INFO Kubernetes file "frontend-service.yaml" created         
INFO Kubernetes file "mlbparks-service.yaml" created         
INFO Kubernetes file "mongodb-service.yaml" created          
INFO Kubernetes file "redis-master-service.yaml" created     
INFO Kubernetes file "redis-slave-service.yaml" created      
INFO Kubernetes file "frontend-deployment.yaml" created      
INFO Kubernetes file "mlbparks-deployment.yaml" created      
INFO Kubernetes file "mongodb-deployment.yaml" created       
INFO Kubernetes file "mongodb-claim0-persistentvolumeclaim.yaml" created
INFO Kubernetes file "redis-master-deployment.yaml" created  
INFO Kubernetes file "redis-slave-deployment.yaml" created

ls

mlbparks-deployment.yaml  mongodb-service.yaml                       redis-slave-service.jsonmlbparks-service.yaml  
frontend-deployment.yaml  mongodb-claim0-persistentvolumeclaim.yaml  redis-master-service.yaml
frontend-service.yaml     mongodb-deployment.yaml                    redis-slave-deployment.yaml
redis-master-deployment.yaml

When multiple docker-compose files are provided the configuration is merged. Any configuration that is common will be overridden by subsequent file.

OpenShift `kompose convert` example

kompose --provider openshift --file docker-voting.yml convert

WARN [worker] Service cannot be created because of missing port.
INFO OpenShift file "vote-service.yaml" created             
INFO OpenShift file "db-service.yaml" created               
INFO OpenShift file "redis-service.yaml" created            
INFO OpenShift file "result-service.yaml" created           
INFO OpenShift file "vote-deploymentconfig.yaml" created    
INFO OpenShift file "vote-imagestream.yaml" created         
INFO OpenShift file "worker-deploymentconfig.yaml" created  
INFO OpenShift file "worker-imagestream.yaml" created       
INFO OpenShift file "db-deploymentconfig.yaml" created      
INFO OpenShift file "db-imagestream.yaml" created           
INFO OpenShift file "redis-deploymentconfig.yaml" created   
INFO OpenShift file "redis-imagestream.yaml" created        
INFO OpenShift file "result-deploymentconfig.yaml" created  
INFO OpenShift file "result-imagestream.yaml" created

It also supports creating buildconfig for build directive in a service. By default, it uses the remote repo for the current git branch as the source repo, and the current branch as the source branch for the build. You can specify a different source repo and branch using --build-repo and --build-branch options respectively.

kompose --provider openshift --file buildconfig/docker-compose.yml convert

WARN [foo] Service cannot be created because of missing port.
INFO OpenShift Buildconfig using git@github.com:rtnpro/kompose.git::master as source.
INFO OpenShift file "foo-deploymentconfig.yaml" created     
INFO OpenShift file "foo-imagestream.yaml" created          
INFO OpenShift file "foo-buildconfig.yaml" created

Note: If you are manually pushing the OpenShift artifacts using oc create -f, you need to ensure that you push the imagestream artifact before the buildconfig artifact, to workaround this OpenShift issue: https://github.com/openshift/origin/issues/4518 .

Alternative Conversions

The default kompose transformation will generate Kubernetes Deployments and Services, in yaml format. You have alternative option to generate json with -j. Also, you can alternatively generate Replication Controllers objects, Daemon Sets, or Helm charts.

kompose convert -j
INFO Kubernetes file "redis-svc.json" created
INFO Kubernetes file "web-svc.json" created
INFO Kubernetes file "redis-deployment.json" created
INFO Kubernetes file "web-deployment.json" created

The *-deployment.json files contain the Deployment objects.

kompose convert --replication-controller
INFO Kubernetes file "redis-svc.yaml" created
INFO Kubernetes file "web-svc.yaml" created
INFO Kubernetes file "redis-replicationcontroller.yaml" created
INFO Kubernetes file "web-replicationcontroller.yaml" created

The *-replicationcontroller.yaml files contain the Replication Controller objects. If you want to specify replicas (default is 1), use --replicas flag: kompose convert --replication-controller --replicas 3.

kompose convert --daemon-set
INFO Kubernetes file "redis-svc.yaml" created
INFO Kubernetes file "web-svc.yaml" created
INFO Kubernetes file "redis-daemonset.yaml" created
INFO Kubernetes file "web-daemonset.yaml" created

The *-daemonset.yaml files contain the DaemonSet objects.

If you want to generate a Chart to be used with Helm run:

kompose convert -c

INFO Kubernetes file "web-svc.yaml" created
INFO Kubernetes file "redis-svc.yaml" created
INFO Kubernetes file "web-deployment.yaml" created
INFO Kubernetes file "redis-deployment.yaml" created
chart created in "./docker-compose/"

tree docker-compose/

docker-compose
├── Chart.yaml
├── README.md
└── templates
    ├── redis-deployment.yaml
    ├── redis-svc.yaml
    ├── web-deployment.yaml
    └── web-svc.yaml

The chart structure is aimed at providing a skeleton for building your Helm charts.

Labels

kompose supports Kompose-specific labels within the docker-compose.yml file in order to explicitly define a service's behavior upon conversion.

kompose.service.type defines the type of service to be created.

For example:

version: "2"
services:
  nginx:
    image: nginx
    dockerfile: foobar
    build: ./foobar
    cap_add:
      - ALL
    container_name: foobar
    labels:
      kompose.service.type: nodeport

kompose.service.expose defines if the service needs to be made accessible from outside the cluster or not. If the value is set to "true", the provider sets the endpoint automatically, and for any other value, the value is set as the hostname. If multiple ports are defined in a service, the first one is chosen to be the exposed.
- For the Kubernetes provider, an ingress resource is created and it is assumed that an ingress controller has already been configured.
- For the OpenShift provider, a route is created.
For example:
```
version: "2"
services:
  web:
    image: tuna/docker-counter23
    ports:
    - "5000:5000"
    links:
    - redis
    labels:
      kompose.service.expose: "counter.example.com"
  redis:
    image: redis:3.0
    ports:
    - "6379"
```

The currently supported options are:

Key	Value
kompose.service.type	nodeport / clusterip / loadbalancer
kompose.service.expose	true / hostname

Note: The kompose.service.type label should be defined with ports only, otherwise kompose will fail.

Restart

If you want to create normal pods without controllers you can use restart construct of docker-compose to define that. Follow table below to see what happens on the restart value.

`docker-compose` `restart`	object created	Pod `restartPolicy`
`""`	controller object	`Always`
`always`	controller object	`Always`
`on-failure`	Pod	`OnFailure`
`no`	Pod	`Never`

Note: The controller object could be deployment or replicationcontroller.

For example, the pival service will become pod down here. This container calculated value of pi.

version: '2'

services:
  pival:
    image: perl
    command: ["perl",  "-Mbignum=bpi", "-wle", "print bpi(2000)"]
    restart: "on-failure"

Warning about Deployment Configurations

If the Docker Compose file has a volume specified for a service, the Deployment (Kubernetes) or DeploymentConfig (OpenShift) strategy is changed to "Recreate" instead of "RollingUpdate" (default). This is done to avoid multiple instances of a service from accessing a volume at the same time.

If the Docker Compose file has service name with _ in it (for example, web_service), then it will be replaced by - and the service name will be renamed accordingly (for example, web-service). Kompose does this because "Kubernetes" doesn't allow _ in object name.

Please note that changing service name might break some docker-compose files.

Docker Compose Versions

Kompose supports Docker Compose versions: 1, 2 and 3. We have limited support on versions 2.1 and 3.2 due to their experimental nature.

A full list on compatibility between all three versions is listed in our conversion document including a list of all incompatible Docker Compose keys.

25 - Enforce Pod Security Standards by Configuring the Built-in Admission Controller

Kubernetes provides a built-in admission controller to enforce the Pod Security Standards. You can configure this admission controller to set cluster-wide defaults and exemptions.

Before you begin

Following an alpha release in Kubernetes v1.22, Pod Security Admission became available by default in Kubernetes v1.23, as a beta. From version 1.25 onwards, Pod Security Admission is generally available.

To check the version, enter kubectl version.

If you are not running Kubernetes 1.28, you can switch to viewing this page in the documentation for the Kubernetes version that you are running.

Configure the Admission Controller

Note: pod-security.admission.config.k8s.io/v1 configuration requires v1.25+. For v1.23 and v1.24, use v1beta1. For v1.22, use v1alpha1.

apiVersion: apiserver.config.k8s.io/v1
kind: AdmissionConfiguration
plugins:
- name: PodSecurity
  configuration:
    apiVersion: pod-security.admission.config.k8s.io/v1 # see compatibility note
    kind: PodSecurityConfiguration
    # Defaults applied when a mode label is not set.
    #
    # Level label values must be one of:
    # - "privileged" (default)
    # - "baseline"
    # - "restricted"
    #
    # Version label values must be one of:
    # - "latest" (default) 
    # - specific version like "v1.28"
    defaults:
      enforce: "privileged"
      enforce-version: "latest"
      audit: "privileged"
      audit-version: "latest"
      warn: "privileged"
      warn-version: "latest"
    exemptions:
      # Array of authenticated usernames to exempt.
      usernames: []
      # Array of runtime class names to exempt.
      runtimeClasses: []
      # Array of namespaces to exempt.
      namespaces: []

Note: The above manifest needs to be specified via the --admission-control-config-file to kube-apiserver.

26 - Enforce Pod Security Standards with Namespace Labels

Namespaces can be labeled to enforce the Pod Security Standards. The three policies privileged, baseline and restricted broadly cover the security spectrum and are implemented by the Pod Security admission controller.

Before you begin

Pod Security Admission was available by default in Kubernetes v1.23, as a beta. From version 1.25 onwards, Pod Security Admission is generally available.

To check the version, enter kubectl version.

Requiring the `baseline` Pod Security Standard with namespace labels

This manifest defines a Namespace my-baseline-namespace that:

Blocks any pods that don't satisfy the baseline policy requirements.
Generates a user-facing warning and adds an audit annotation to any created pod that does not meet the restricted policy requirements.
Pins the versions of the baseline and restricted policies to v1.28.

apiVersion: v1
kind: Namespace
metadata:
  name: my-baseline-namespace
  labels:
    pod-security.kubernetes.io/enforce: baseline
    pod-security.kubernetes.io/enforce-version: v1.28

    # We are setting these to our _desired_ `enforce` level.
    pod-security.kubernetes.io/audit: restricted
    pod-security.kubernetes.io/audit-version: v1.28
    pod-security.kubernetes.io/warn: restricted
    pod-security.kubernetes.io/warn-version: v1.28

Add labels to existing namespaces with `kubectl label`

Note: When an enforce policy (or version) label is added or changed, the admission plugin will test each pod in the namespace against the new policy. Violations are returned to the user as warnings.

It is helpful to apply the --dry-run flag when initially evaluating security profile changes for namespaces. The Pod Security Standard checks will still be run in dry run mode, giving you information about how the new policy would treat existing pods, without actually updating a policy.

kubectl label --dry-run=server --overwrite ns --all \
    pod-security.kubernetes.io/enforce=baseline

Applying to all namespaces

If you're just getting started with the Pod Security Standards, a suitable first step would be to configure all namespaces with audit annotations for a stricter level such as baseline:

kubectl label --overwrite ns --all \
  pod-security.kubernetes.io/audit=baseline \
  pod-security.kubernetes.io/warn=baseline

Note that this is not setting an enforce level, so that namespaces that haven't been explicitly evaluated can be distinguished. You can list namespaces without an explicitly set enforce level using this command:

kubectl get namespaces --selector='!pod-security.kubernetes.io/enforce'

Applying to a single namespace

You can update a specific namespace as well. This command adds the enforce=restricted policy to my-existing-namespace, pinning the restricted policy version to v1.28.

kubectl label --overwrite ns my-existing-namespace \
  pod-security.kubernetes.io/enforce=restricted \
  pod-security.kubernetes.io/enforce-version=v1.28

27 - Migrate from PodSecurityPolicy to the Built-In PodSecurity Admission Controller

This page describes the process of migrating from PodSecurityPolicies to the built-in PodSecurity admission controller. This can be done effectively using a combination of dry-run and audit and warn modes, although this becomes harder if mutating PSPs are used.

Before you begin

Your Kubernetes server must be at or later than version v1.22. To check the version, enter kubectl version.

If you are currently running a version of Kubernetes other than 1.28, you may want to switch to viewing this page in the documentation for the version of Kubernetes that you are actually running.

This page assumes you are already familiar with the basic Pod Security Admission concepts.

Overall approach

There are multiple strategies you can take for migrating from PodSecurityPolicy to Pod Security Admission. The following steps are one possible migration path, with a goal of minimizing both the risks of a production outage and of a security gap.

Decide whether Pod Security Admission is the right fit for your use case.
Review namespace permissions
Simplify & standardize PodSecurityPolicies
Update namespaces
1. Identify an appropriate Pod Security level
2. Verify the Pod Security level
3. Enforce the Pod Security level
4. Bypass PodSecurityPolicy
Review namespace creation processes
Disable PodSecurityPolicy

0. Decide whether Pod Security Admission is right for you

Pod Security Admission was designed to meet the most common security needs out of the box, and to provide a standard set of security levels across clusters. However, it is less flexible than PodSecurityPolicy. Notably, the following features are supported by PodSecurityPolicy but not Pod Security Admission:

Setting default security constraints - Pod Security Admission is a non-mutating admission controller, meaning it won't modify pods before validating them. If you were relying on this aspect of PSP, you will need to either modify your workloads to meet the Pod Security constraints, or use a Mutating Admission Webhook to make those changes. See Simplify & Standardize PodSecurityPolicies below for more detail.
Fine-grained control over policy definition - Pod Security Admission only supports 3 standard levels. If you require more control over specific constraints, then you will need to use a Validating Admission Webhook to enforce those policies.
Sub-namespace policy granularity - PodSecurityPolicy lets you bind different policies to different Service Accounts or users, even within a single namespace. This approach has many pitfalls and is not recommended, but if you require this feature anyway you will need to use a 3rd party webhook instead. The exception to this is if you only need to completely exempt specific users or RuntimeClasses, in which case Pod Security Admission does expose some static configuration for exemptions.

Even if Pod Security Admission does not meet all of your needs it was designed to be complementary to other policy enforcement mechanisms, and can provide a useful fallback running alongside other admission webhooks.

1. Review namespace permissions

Pod Security Admission is controlled by labels on namespaces. This means that anyone who can update (or patch or create) a namespace can also modify the Pod Security level for that namespace, which could be used to bypass a more restrictive policy. Before proceeding, ensure that only trusted, privileged users have these namespace permissions. It is not recommended to grant these powerful permissions to users that shouldn't have elevated permissions, but if you must you will need to use an admission webhook to place additional restrictions on setting Pod Security labels on Namespace objects.

2. Simplify & standardize PodSecurityPolicies

In this section, you will reduce mutating PodSecurityPolicies and remove options that are outside the scope of the Pod Security Standards. You should make the changes recommended here to an offline copy of the original PodSecurityPolicy being modified. The cloned PSP should have a different name that is alphabetically before the original (for example, prepend a 0 to it). Do not create the new policies in Kubernetes yet - that will be covered in the Rollout the updated policies section below.

2.a. Eliminate purely mutating fields

If a PodSecurityPolicy is mutating pods, then you could end up with pods that don't meet the Pod Security level requirements when you finally turn PodSecurityPolicy off. In order to avoid this, you should eliminate all PSP mutation prior to switching over. Unfortunately PSP does not cleanly separate mutating & validating fields, so this is not a straightforward migration.

You can start by eliminating the fields that are purely mutating, and don't have any bearing on the validating policy. These fields (also listed in the Mapping PodSecurityPolicies to Pod Security Standards reference) are:

.spec.defaultAllowPrivilegeEscalation
.spec.runtimeClass.defaultRuntimeClassName
.metadata.annotations['seccomp.security.alpha.kubernetes.io/defaultProfileName']
.metadata.annotations['apparmor.security.beta.kubernetes.io/defaultProfileName']
.spec.defaultAddCapabilities - Although technically a mutating & validating field, these should be merged into .spec.allowedCapabilities which performs the same validation without mutation.

Caution: Removing these could result in workloads missing required configuration, and cause problems. See Rollout the updated policies below for advice on how to roll these changes out safely.

2.b. Eliminate options not covered by the Pod Security Standards

There are several fields in PodSecurityPolicy that are not covered by the Pod Security Standards. If you must enforce these options, you will need to supplement Pod Security Admission with an admission webhook, which is outside the scope of this guide.

First, you can remove the purely validating fields that the Pod Security Standards do not cover. These fields (also listed in the Mapping PodSecurityPolicies to Pod Security Standards reference with "no opinion") are:

.spec.allowedHostPaths
.spec.allowedFlexVolumes
.spec.allowedCSIDrivers
.spec.forbiddenSysctls
.spec.runtimeClass

You can also remove the following fields, that are related to POSIX / UNIX group controls.

Caution: If any of these use the MustRunAs strategy they may be mutating! Removing these could result in workloads not setting the required groups, and cause problems. See Rollout the updated policies below for advice on how to roll these changes out safely.

.spec.runAsGroup
.spec.supplementalGroups
.spec.fsGroup

The remaining mutating fields are required to properly support the Pod Security Standards, and will need to be handled on a case-by-case basis later:

.spec.requiredDropCapabilities - Required to drop ALL for the Restricted profile.
.spec.seLinux - (Only mutating with the MustRunAs rule) required to enforce the SELinux requirements of the Baseline & Restricted profiles.
.spec.runAsUser - (Non-mutating with the RunAsAny rule) required to enforce RunAsNonRoot for the Restricted profile.
.spec.allowPrivilegeEscalation - (Only mutating if set to false) required for the Restricted profile.

2.c. Rollout the updated PSPs

Next, you can rollout the updated policies to your cluster. You should proceed with caution, as removing the mutating options may result in workloads missing required configuration.

For each updated PodSecurityPolicy:

Identify pods running under the original PSP. This can be done using the kubernetes.io/psp annotation. For example, using kubectl:

PSP_NAME="original" # Set the name of the PSP you're checking for
kubectl get pods --all-namespaces -o jsonpath="{range .items[?(@.metadata.annotations.kubernetes\.io\/psp=='$PSP_NAME')]}{.metadata.namespace} {.metadata.name}{'\n'}{end}"

Compare these running pods against the original pod spec to determine whether PodSecurityPolicy has modified the pod. For pods created by a workload resource you can compare the pod with the PodTemplate in the controller resource. If any changes are identified, the original Pod or PodTemplate should be updated with the desired configuration. The fields to review are:
- .metadata.annotations['container.apparmor.security.beta.kubernetes.io/*'] (replace * with each container name)
- .spec.runtimeClassName
- .spec.securityContext.fsGroup
- .spec.securityContext.seccompProfile
- .spec.securityContext.seLinuxOptions
- .spec.securityContext.supplementalGroups
- On containers, under .spec.containers[*] and .spec.initContainers[*]:
  - .securityContext.allowPrivilegeEscalation
  - .securityContext.capabilities.add
  - .securityContext.capabilities.drop
  - .securityContext.readOnlyRootFilesystem
  - .securityContext.runAsGroup
  - .securityContext.runAsNonRoot
  - .securityContext.runAsUser
  - .securityContext.seccompProfile
  - .securityContext.seLinuxOptions
Create the new PodSecurityPolicies. If any Roles or ClusterRoles are granting use on all PSPs this could cause the new PSPs to be used instead of their mutating counter-parts.
Update your authorization to grant access to the new PSPs. In RBAC this means updating any Roles or ClusterRoles that grant the use permission on the original PSP to also grant it to the updated PSP.
Verify: after some soak time, rerun the command from step 1 to see if any pods are still using the original PSPs. Note that pods need to be recreated after the new policies have been rolled out before they can be fully verified.
(optional) Once you have verified that the original PSPs are no longer in use, you can delete them.

3. Update Namespaces

The following steps will need to be performed on every namespace in the cluster. Commands referenced in these steps use the $NAMESPACE variable to refer to the namespace being updated.

3.a. Identify an appropriate Pod Security level

Start reviewing the Pod Security Standards and familiarizing yourself with the 3 different levels.

There are several ways to choose a Pod Security level for your namespace:

By security requirements for the namespace - If you are familiar with the expected access level for the namespace, you can choose an appropriate level based on those requirements, similar to how one might approach this on a new cluster.
By existing PodSecurityPolicies - Using the Mapping PodSecurityPolicies to Pod Security Standards reference you can map each PSP to a Pod Security Standard level. If your PSPs aren't based on the Pod Security Standards, you may need to decide between choosing a level that is at least as permissive as the PSP, and a level that is at least as restrictive. You can see which PSPs are in use for pods in a given namespace with this command:
```
kubectl get pods -n $NAMESPACE -o jsonpath="{.items[*].metadata.annotations.kubernetes\.io\/psp}" | tr " " "\n" | sort -u
```
By existing pods - Using the strategies under Verify the Pod Security level, you can test out both the Baseline and Restricted levels to see whether they are sufficiently permissive for existing workloads, and chose the least-privileged valid level.

Caution: Options 2 & 3 above are based on existing pods, and may miss workloads that aren't currently running, such as CronJobs, scale-to-zero workloads, or other workloads that haven't rolled out.

3.b. Verify the Pod Security level

Once you have selected a Pod Security level for the namespace (or if you're trying several), it's a good idea to test it out first (you can skip this step if using the Privileged level). Pod Security includes several tools to help test and safely roll out profiles.

First, you can dry-run the policy, which will evaluate pods currently running in the namespace against the applied policy, without making the new policy take effect:

# $LEVEL is the level to dry-run, either "baseline" or "restricted".
kubectl label --dry-run=server --overwrite ns $NAMESPACE pod-security.kubernetes.io/enforce=$LEVEL

This command will return a warning for any existing pods that are not valid under the proposed level.

The second option is better for catching workloads that are not currently running: audit mode. When running under audit-mode (as opposed to enforcing), pods that violate the policy level are recorded in the audit logs, which can be reviewed later after some soak time, but are not forbidden. Warning mode works similarly, but returns the warning to the user immediately. You can set the audit level on a namespace with this command:

kubectl label --overwrite ns $NAMESPACE pod-security.kubernetes.io/audit=$LEVEL

If either of these approaches yield unexpected violations, you will need to either update the violating workloads to meet the policy requirements, or relax the namespace Pod Security level.

3.c. Enforce the Pod Security level

When you are satisfied that the chosen level can safely be enforced on the namespace, you can update the namespace to enforce the desired level:

kubectl label --overwrite ns $NAMESPACE pod-security.kubernetes.io/enforce=$LEVEL

3.d. Bypass PodSecurityPolicy

Finally, you can effectively bypass PodSecurityPolicy at the namespace level by binding the fully privileged PSP to all service accounts in the namespace.

# The following cluster-scoped commands are only needed once.
kubectl apply -f privileged-psp.yaml
kubectl create clusterrole privileged-psp --verb use --resource podsecuritypolicies.policy --resource-name privileged

# Per-namespace disable
kubectl create -n $NAMESPACE rolebinding disable-psp --clusterrole privileged-psp --group system:serviceaccounts:$NAMESPACE

Since the privileged PSP is non-mutating, and the PSP admission controller always prefers non-mutating PSPs, this will ensure that pods in this namespace are no longer being modified or restricted by PodSecurityPolicy.

The advantage to disabling PodSecurityPolicy on a per-namespace basis like this is if a problem arises you can easily roll the change back by deleting the RoleBinding. Just make sure the pre-existing PodSecurityPolicies are still in place!

# Undo PodSecurityPolicy disablement.
kubectl delete -n $NAMESPACE rolebinding disable-psp

4. Review namespace creation processes

Now that existing namespaces have been updated to enforce Pod Security Admission, you should ensure that your processes and/or policies for creating new namespaces are updated to ensure that an appropriate Pod Security profile is applied to new namespaces.

You can also statically configure the Pod Security admission controller to set a default enforce, audit, and/or warn level for unlabeled namespaces. See Configure the Admission Controller for more information.

5. Disable PodSecurityPolicy

Finally, you're ready to disable PodSecurityPolicy. To do so, you will need to modify the admission configuration of the API server: How do I turn off an admission controller?.

To verify that the PodSecurityPolicy admission controller is no longer enabled, you can manually run a test by impersonating a user without access to any PodSecurityPolicies (see the PodSecurityPolicy example), or by verifying in the API server logs. At startup, the API server outputs log lines listing the loaded admission controller plugins:

I0218 00:59:44.903329      13 plugins.go:158] Loaded 16 mutating admission controller(s) successfully in the following order: NamespaceLifecycle,LimitRanger,ServiceAccount,NodeRestriction,TaintNodesByCondition,Priority,DefaultTolerationSeconds,ExtendedResourceToleration,PersistentVolumeLabel,DefaultStorageClass,StorageObjectInUseProtection,RuntimeClass,DefaultIngressClass,MutatingAdmissionWebhook.
I0218 00:59:44.903350      13 plugins.go:161] Loaded 14 validating admission controller(s) successfully in the following order: LimitRanger,ServiceAccount,PodSecurity,Priority,PersistentVolumeClaimResize,RuntimeClass,CertificateApproval,CertificateSigning,CertificateSubjectRestriction,DenyServiceExternalIPs,ValidatingAdmissionWebhook,ResourceQuota.

You should see PodSecurity (in the validating admission controllers), and neither list should contain PodSecurityPolicy.

Once you are certain the PSP admission controller is disabled (and after sufficient soak time to be confident you won't need to roll back), you are free to delete your PodSecurityPolicies and any associated Roles, ClusterRoles, RoleBindings and ClusterRoleBindings (just make sure they don't grant any other unrelated permissions).